IEEE Transactions on Industrial Electronics IEEE Home Page  IEEE Transactions on Industrial Electronics  IES Home Page

Volume 51,  Number 1, Feb 2004           Access to the journal on IEEE XPLORE     IE Transactions Home Page


Drive Control


1. 1.     H. Abu-Rub, J. Guzinski, Z. Krzeminski, H.A. Toliyat, "Advanced control of induction motor based on load angle estimation," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 5- 14, Feb 2004.  Full Text Link


1. 2.     Ching-Guo Chen, Tian-Hua Liu, Ming-Tsan Lin, Chih-An Tai, "Position control of a sensorless synchronous reluctance motor," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 15- 25, Feb 2004.  Full Text Link


1. 3.     Z.-J. Yang, K. Miyazaki, S. Kanae, K. Wada, "Robust position control of a magnetic levitation system via dynamic surface control technique," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 26- 34, Feb 2004.  Full Text Link


1. 4.     Ya-Fu Peng, Rong-Jong Wai, Chih-Min Lin, "Implementation of LLCC-resonant driving circuit and adaptive CMAC neural network control for linear piezoelectric ceramic motor," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 35- 48, Feb 2004.  Full Text Link


1. 5.     A. Bunte, S. Beineke, "High-performance speed measurement by suppression of systematic resolver and encoder errors," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 49- 53, Feb 2004.  Full Text Link

Power Electronics


1. 6.     D.B. Costa, C.M.C. Duarte, "The ZVS-PWM active-clamping CUK converter," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 54- 60, Feb 2004.  Full Text Link


1. 7.     Jianguo Liu, P. Pillay, H. Douglas, "Wavelet modeling of motor drives applied to the calculation of motor terminal overvoltages," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 61- 66, Feb 2004.  Full Text Link


1. 8.     S. Tamai, S. Murakami, R. Uchida, H. Akagi, "Control and performance of a self-commutated GTO converter operating in parallel with line-commutated thyristor converters," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 67- 73, Feb 2004.  Full Text Link


1. 9.     D.A. Bennett, R.H. Selfridge, J.N. Harb, D.T. Comer, "A control circuit for a microsensor hybrid power supply," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 74- 80, Feb 2004.  Full Text Link


1. 10.     Xiangning He, Yan Deng, B.W. Williams, S.J. Finney, Zhaoming Qian, "A simple energy recovery circuit for high-power inverters with complete turn-on and turn-off snubbers," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 81- 88, Feb 2004.  Full Text Link


1. 11.     H. Bodur, A.F. Bakan, "An improved ZCT-PWM DC-DC converter for high-power and frequency applications," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 89- 95, Feb 2004.  Full Text Link


1. 12.     A.M. Omar, N.A. Rahim, S. Mekhilef, "Three-phase synchronous PWM for flyback converter with power-factor correction using FPGA ASIC design," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 96- 106, Feb 2004.  Full Text Link


1. 13.     M. Eltabach, A. Charara, I. Zein, "A comparison of external and internal methods of signal spectral analysis for broken rotor bars detection in induction motors," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 107- 121, Feb 2004.  Full Text Link


1. 14.     C. Branas, F.J. Azcondo, S. Bracho, "Study of output power variation due to component tolerances in LC/sub s/C/sub p/ resonant inverters applied to HPS lamp control," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 122- 131, Feb 2004.  Full Text Link


1. 15.     G.-M. Lee, Dong-Choon Lee, Jul-Ki Seok, "Control of series active power filters compensating for source voltage unbalance and current harmonics," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 132- 139, Feb 2004.  Full Text Link


1. 16.     Byungcho Choi, Jaehyun Nho, Honnyong Cha, Taeyoung Ahn, Seungwon Choi, "Design and implementation of low-profile contactless battery charger using planar printed circuit board windings as energy transfer device," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 140- 147, Feb 2004.  Full Text Link


1. 17.     Chwei-Sen Wang, G.A. Covic, O.H. Stielau, "Power transfer capability and bifurcation phenomena of loosely coupled inductive power transfer systems," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 148- 157, Feb 2004.  Full Text Link


1. 18.     L. Helle, K.B. Larsen, A.H. Jorgensen, S. Munk-Nielsen, F. Blaabjerg, "Evaluation of modulation schemes for three-phase to three-phase matrix converters," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 158- 171, Feb 2004.  Full Text Link

Emerging Technology


1. 19.     F.H.F. Leung, H.K. Lam, S.H. Ling, P.K.S. Tam, "Optimal and stable fuzzy controllers for nonlinear systems based on an improved genetic algorithm," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 172- 182, Feb 2004.  Full Text Link


1. 20.     S. Wu, T.W.S. Chow, "Induction machine fault detection using SOM-based RBF neural networks," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 183- 194, Feb 2004.  Full Text Link

Robotics And Vision


1. 21.     W.L. Xu, S. Yue, "Pre-posed configuration of flexible redundant robot manipulators for impact vibration alleviating," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 195- 200, Feb 2004.  Full Text Link


1. 22.     Rong-Jong Wai, Meng-Chang Lee, "Intelligent optimal control of single-link flexible robot arm," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 201- 220, Feb 2004.  Full Text Link


1. 23.     S. Katsura, K. Ohnishi, "Human cooperative wheelchair for haptic interaction based on dual compliance control," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 221- 228, Feb 2004.  Full Text Link


1. 24.     K. Morioka, Joo-Ho Lee, H. Hashimoto, "Human-following mobile robot in a distributed intelligent sensor network," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 229- 237, Feb 2004.  Full Text Link
 

Letters To The Editor

1. 25.     P. Sooraksa, G. Chen, "On comparison of hybrid fuzzy PI plus conventional D controller versus fuzzy PI+D controller," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 238- 239, Feb 2004.  Full Text Link


1. 26.     P.W. Wheeler, J. Clare, L. Empringham, "Enhancement of matrix converter output waveform quality using minimized commutation times," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 240- 244, Feb 2004.  Full Text Link


1. 27.     C.M. Saaj, B. Bandyopadhyay, H. Unbehauen, "A minor correction to "A new algorithm for discrete-time sliding mode control using fast output sampling feedback"," Trans. on Industrial Electronics, vol. 51, no. 1, pp. 244- 247, Feb 2004.  Full Text Link

 

 

Volume 51,  Number 2, Apr 2004           Access to the journal on IEEE XPLORE     IE Transactions Home Page

 

Special Section Papers on Automotive Electronic Systems



2. 1.     F. Cuesta, F. Gomez-Bravo, A. Ollero, "Parking maneuvers of industrial-like electrical vehicles with and without trailer," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 257- 269, Apr 2004.  Full Text Link


2. 2.     R. Daily, D.M. Bevly, "The use of GPS for vehicle stability control systems," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 270- 277, Apr 2004.  Full Text Link


2. 3.     J. Stephant, A. Charara, D. Meizel, "Virtual sensor: application to vehicle sideslip angle and transversal forces," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 278- 289, Apr 2004.  Full Text Link


2. 4.     M. Parmar, J.Y. Hung, "A sensorless optimal control system for an automotive electric power assist steering system," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 290- 298, Apr 2004.  Full Text Link


2. 5.     M. Montanari, F. Ronchi, C. Rossi, A. Tonielli, "Control of a camless engine electromechanical actuator: position reconstruction and dynamic performance analysis," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 299- 311, Apr 2004.  Full Text Link


2. 6.     Junha Kim, Jinhwan Jung, Kwanghee Nam, "Dual-inverter control strategy for high-speed operation of EV induction motors," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 312- 320, Apr 2004.  Full Text Link


2. 7.     W.G. Koellner, G.M. Brown, J. Rodriguez, J. Pontt, P. Cortes, H. Miranda, "Recent advances in mining haul trucks," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 321- 329, Apr 2004.  Full Text Link
 

Drive Control

2. 8.     Ching-Chih Tsai, Chih-Hung Huang, "Model reference adaptive predictive control for a variable-frequency oil-cooling machine," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 330- 339, Apr 2004.  Full Text Link


2. 9.     A.G. Loukianov, J.M. Canedo, V.I. Utkin, J. Cabrera-Vazquez, "Discontinuous controller for power systems: sliding-mode block control approach," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 340- 353, Apr 2004.  Full Text Link


2. 10.     N. Bonnail, D. Tonneau, F. Jandard, G.-A. Capolino, H. Dallaporta, "Variable structure control of a piezoelectric actuator for a scanning tunneling microscope," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 354- 363, Apr 2004.  Full Text Link


2. 11.     A. Damiano, G.L. Gatto, I. Marongiu, A. Pisano, "Second-order sliding-mode control of DC drives," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 364- 373, Apr 2004.  Full Text Link


2. 12.     Jin-Woo Ahn, Sung-Jun Park, Dong-Hee Lee, "Hybrid excitation of SRM for reduction of vibration and acoustic noise," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 374- 380, Apr 2004.  Full Text Link


2. 13.     Chunxiang Wang, Yongzhang Wang, Ruqing Yang, Hua Lu, "Research on precision tension control system based on neural network," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 381- 386, Apr 2004.  Full Text Link


2. 14.     P. Baranyi, "TP model transformation as a way to LMI-based controller design," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 387- 400, Apr 2004.  Full Text Link


2. 15.     G. Escobar, A.M. Stankovic, P. Mattavelli, "An adaptive controller in stationary reference frame for D-statcom in unbalanced operation," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 401- 409, Apr 2004.  Full Text Link


2. 16.     K.K. Tse, B.M.T. Ho, H.S.-H. Chung, S.Y.R. Hui, "A comparative study of maximum-power-point trackers for photovoltaic panels using switching-frequency modulation scheme," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 410- 418, Apr 2004.  Full Text Link


2. 17.     M. Lopez, L.G. de Vicuna, M. Castilla, P. Gaya, O. Lopez, "Current distribution control design for paralleled DC/DC converters using sliding-mode control," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 419- 428, Apr 2004.  Full Text Link


2. 18.     H.Y. Kanaan, H. Fortin-Blanchette, K. Al-Haddad, R. Chaffai, L. Duguay, F. Fnaiech, "Linear control design for a current-injection-based three-phase unity-power-factor rectifier," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 429- 438, Apr 2004.  Full Text Link


2. 19.     R.L. de Araujo Ribeiro, C.B. Jacobina, E.R.C. da Silva, A.M.N. Lima, "Fault-tolerant voltage-fed PWM inverter AC motor drive systems," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 439- 446, Apr 2004.  Full Text Link


2. 20.     M. Malinowski, M. Jasinski, M.P. Kazmierkowski, "Simple direct power control of three-phase PWM rectifier using space-vector modulation (DPC-SVM)," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 447- 454, Apr 2004.  Full Text Link


2. 21.     Chongming Qiao, Taotao Jin, K.M. Smedley, "One-cycle control of three-phase active power filter with vector operation," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 455- 463, Apr 2004.  Full Text Link


2. 22.     K.F. Leung, F.H.F. Leung, H.K. Lam, S.H. Ling, "On interpretation of graffiti digits and characters for eBooks: neural-fuzzy network and genetic algorithm approach," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 464- 471, Apr 2004.  Full Text Link


2. 23.     Chin Tsu Yen, Wan-de Weng, Yen Tsun Lin, "FPGA realization of a neural-network-based nonlinear channel equalizer," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 472- 479, Apr 2004.  Full Text Link


2. 24.     G. Ginesu, D.D. Giusto, V. Margner, P. Meinlschmidt, "Detection of foreign bodies in food by thermal image processing," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 480- 490, Apr 2004.  Full Text Link


2. 25.     D. Bi, Y.F. Li, S.K. Tso, G.L. Wang, "Friction modeling and compensation for haptic display based on support vector machine," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 491- 500, Apr 2004.  Full Text Link


2. 26.     T. Muraoka, H. Ikeda, "Selection of display devices used at man-machine interfaces based on human factors," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 501- 506, Apr 2004.  Full Text Link


2. 27.     Kyu-Wang Lee, Doo-Hee Jung, In-Joong Ha, "An online identification method for both stator resistance and back-EMF coefficient of PMSMs without rotational transducers," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 507- 510, Apr 2004.  Full Text Link


2. 28.     M. Karimi-Ghartemani, H. Karimi, M.R. Iravani, "A magnitude/phase-locked loop system based on estimation of frequency and in-phase/quadrature-phase amplitudes," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 511- 517, Apr 2004.  Full Text Link


2. 29.     Xinbo Ruan, Jiangang Wang, "Calculation of the resonant capacitor of the improved current-doubler-rectifier ZVS PWM full-bridge converter," Trans. on Industrial Electronics, vol. 51, no. 2, pp. 518- 520, Apr 2004.  Full Text Link

 

Volume 51,  Number 3, Jun 2004           Access to the journal on IEEE XPLORE     IE Transactions Home Page



3. 1.     Jian-Xin Xu, S.K. Panda, Ya-Jun Pan, Tong Heng Lee, B.H. Lam, "A modular control scheme for PMSM speed control with pulsating torque minimization," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 526- 536, Jun 2004.  Full Text Link


3. 2.     D. Simon, D.L. Feucht, "Synchronous motor phase control by vector addition of induced winding voltages," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 537- 544, Jun 2004.  Full Text Link


3. 3.     Young Ahn Kwon, Sung Hwan Kim, "A new scheme for speed-sensorless control of induction motor," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 545- 550, Jun 2004.  Full Text Link


3. 4.     Li Ran, Yong Liao, "Sampling-induced resonance in an encoderless vector-controlled induction motor drive," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 551- 557, Jun 2004.  Full Text Link


3. 5.     T.W.S. Chow, Shi Hai, "Induction machine fault diagnostic analysis with wavelet technique," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 558- 565, Jun 2004.  Full Text Link


3. 6.     G. Moschopoulos, P.K. Jain, "A novel single-phase soft-switched rectifier with unity power factor and minimal component count," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 566- 576, Jun 2004.  Full Text Link


3. 7.     Chung-Wook Roh, Seung-Hoon Han, Sung-Soo Hong, Sug-Chin Sakong, Myung-Joong Youn, "Dual-coupled inductor-fed DC/DC converter for battery drive applications," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 577- 584, Jun 2004.  Full Text Link


3. 8.     H. Abu-Rub, J. Guzinski, Z. Krzeminski, H.A. Toliyat, "Predictive current control of voltage-source inverters," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 585- 593, Jun 2004.  Full Text Link


3. 9.     Fang Lin Luo, Hong Ye, "Positive output multiple-lift push-pull switched-capacitor Luo-converters," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 594- 602, Jun 2004.  Full Text Link


3. 10.     R. Cardenas, R. Pena, G.M. Asher, J. Clare, R. Blasco-Gimenez, "Control strategies for power smoothing using a flywheel driven by a sensorless vector-controlled induction machine operating in a wide speed range," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 603- 614, Jun 2004.  Full Text Link


3. 11.     Jun-Young Lee, Jin-Sung Kim, Nam-Sung Jung, Bo-Hyung Cho, "The current injection method for AC plasma display panel (PDP) sustainer," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 615- 624, Jun 2004.  Full Text Link


3. 12.     H. Matsuo, Wenzhong Lin, F. Kurokawa, T. Shigemizu, N. Watanabe, "Characteristics of the multiple-input DC-DC converter," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 625- 631, Jun 2004.  Full Text Link


3. 13.     N.P. Papanikolaou, E.C. Tatakis, "Active voltage clamp in flyback converters operating in CCM mode under wide load variation," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 632- 640, Jun 2004.  Full Text Link


3. 14.     B. Singh, B.N. Singh, A. Chandra, K. Al-Haddad, A. Pandey, D.P. Kothari, "A review of three-phase improved power quality AC-DC converters," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 641- 660, Jun 2004.  Full Text Link


3. 15.     A. Emadi, "Modeling and analysis of multiconverter DC power electronic systems using the generalized state-space averaging method," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 661- 668, Jun 2004.  Full Text Link


3. 16.     B.A. Welchko, M.B. de Rossiter Correa, T.A. Lipo, "A three-level MOSFET inverter for low-power drives," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 669- 674, Jun 2004.  Full Text Link


3. 17.     Wei Wen, Kam-Wah Siu, Yim-Shu Lee, "Design of a single-switch high-power-factor regulator with near-zero output current ripple," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 675- 685, Jun 2004.  Full Text Link


3. 18.     M.J. Embrechts, S. Benedek, "Hybrid identification of nuclear power plant transients with artificial neural networks," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 686- 693, Jun 2004.  Full Text Link


3. 19.     N. Gebraeel, M. Lawley, R. Liu, V. Parmeshwaran, "Residual life predictions from vibration-based degradation signals: a neural network approach," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 694- 700, Jun 2004.  Full Text Link


3. 20.     Kyung Chang Lee, Hyun Hee Kim, Suk Lee, Man Hyung Lee, "Timer selection for satisfying the maximum allowable delay using performance model of profibus token passing protocol," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 701- 710, Jun 2004.  Full Text Link


3. 21.     Min-Jung Lee, Young-Kiu Choi, "An adaptive neurocontroller using RBFN for robot manipulators," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 711- 717, Jun 2004.  Full Text Link


3. 22.     Joon Seop Oh, Yoon Ho Choi, Jin Bae Park, Y.F. Zheng, "Complete coverage navigation of cleaning robots using triangular-cell-based map," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 718- 726, Jun 2004.  Full Text Link


3. 23.     F. Jurado, "Neural network control for dynamic voltage restorer," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 727- 729, Jun 2004.  Full Text Link


3. 24.     Z.H. Shao, "Robust stability of uncertain neutral delay systems," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 730- 733, Jun 2004.  Full Text Link


3. 25.     K.C. Wu, "A comprehensive analysis of current-mode control for DCM buck-boost converters," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 733- 735, Jun 2004.  Full Text Link


3. 26.     R.J. Mantz, H. De Battista, "Comments on "variable-structure PID control to prevent integrator windup"," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 736- 738, Jun 2004.  Full Text Link


3. 27.     A.S. Hodel, C.E. Hall, "Authors' reply to comments on "variable-structure PID control to prevent integrator windup"," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 738- 739, Jun 2004.  Full Text Link


3. 28.     L.U. Gokdere, M.A. Simaan, C.W. Brice, "Response to comments on "passivity-based control of saturated induction motors"," Trans. on Industrial Electronics, vol. 51, no. 3, pp. 739, Jun 2004.  Full Text Link

Volume 51,  Number 4, Aug 2004           Access to the journal on IEEE XPLORE     IE Transactions Home Page



4. 1.     G.S. Buja, M.P. Kazmierkowski, "Direct torque control of PWM inverter-fed AC motors - a survey," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 744- 757, Aug 2004.  Full Text Link


4. 2.     N.R.N. Idris, A.H.M. Yatim, "Direct torque control of induction machines with constant switching frequency and reduced torque ripple," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 758- 767, Aug 2004.  Full Text Link


4. 3.     Y.-S. Lai, Wen-Ke Wang, Yen-Chang Chen, "Novel switching techniques for reducing the speed ripple of AC drives with direct torque control," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 768- 775, Aug 2004.  Full Text Link


4. 4.     V. Ambrozic, G.S. Buja, R. Menis, "Band-constrained technique for direct torque control of induction motor," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 776- 784, Aug 2004.  Full Text Link


4. 5.     C. Lascu, I. Boldea, F. Blaabjerg, "Variable-structure direct torque control - a class of fast and robust controllers for induction machine drives," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 785- 792, Aug 2004.  Full Text Link


4. 6.     J. Luukko, O. Pyrhonen, M. Niemela, J. Pyrhonen, "Limitation of the load angle in a direct-torque-controlled synchronous machine drive," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 793- 798, Aug 2004.  Full Text Link


4. 7.     M.F. Rahman, Md.E. Haque, Lixin Tang, Limin Zhong, "Problems associated with the direct torque control of an interior permanent-magnet synchronous motor drive and their remedies," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 799- 809, Aug 2004.  Full Text Link


4. 8.     A. Steimel, "Direct self-control and synchronous pulse techniques for high-power traction inverters in comparison," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 810- 820, Aug 2004.  Full Text Link


4. 9.     K. Yoshida, H. Takami, A. Fujii, "Smooth section crossing of controlled-repulsive PM LSM vehicle by DTC method based on new concept of fictitious section," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 821- 826, Aug 2004.  Full Text Link


4. 10.     J. Rodriguez, J. Pontt, S. Kouro, P. Correa, "Direct torque control with imposed switching frequency in an 11-level cascaded inverter," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 827- 833, Aug 2004.  Full Text Link


4. 11.     J. Rodriguez, J. Pontt, P. Correa, P. Cortes, C. Silva, "A new modulation method to reduce common-mode voltages in multilevel inverters," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 834- 839, Aug 2004.  Full Text Link


4. 12.     M.D.L. del Casale, N. Femia, P. Lamberti, V. Mainardi, "Selection of optimal closed-loop controllers for DC-DC voltage regulators based on nominal and tolerance design," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 840- 849, Aug 2004.  Full Text Link


4. 13.     J. Diaz, F. Nuno, J.M. Lopera, J.A. Martin-Ramos, "A new control strategy for an AC/DC converter based on a piezoelectric transformer," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 850- 856, Aug 2004.  Full Text Link


4. 14.     J. Diaz, J.A. Martin-Ramos, A.M. Pernia, F. Nuno, F.F. Linera, "Intelligent and universal fast charger for Ni-Cd and Ni-MH batteries in portable applications," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 857- 863, Aug 2004.  Full Text Link


4. 15.     Y.P.B. Yeung, K.W.E. Cheng, S.L. Ho, K.K. Law, D. Sutanto, "Unified analysis of switched-capacitor resonant converters," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 864- 873, Aug 2004.  Full Text Link


4. 16.     Wennan Guo, P.K. Jain, "A power-factor-corrected AC-AC inverter topology using a unified controller for high-frequency power distribution architecture," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 874- 883, Aug 2004.  Full Text Link


4. 17.     D. Alexa, A. Sirbu, D.-M. Dobrea, "An analysis of three-phase rectifiers with near-sinusoidal input currents," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 884- 891, Aug 2004.  Full Text Link


4. 18.     Tzann-Shin Lee, "Lagrangian modeling and passivity-based control of three-phase AC/DC voltage-source converters," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 892- 902, Aug 2004.  Full Text Link


4. 19.     S. Kansal, G. Cook, "Use of a sinusoidal series for modeling discrete windowed data as an alternative to interpolation," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 903- 909, Aug 2004.  Full Text Link


4. 20.     S.J. Ovaska, O. Vainio, "Evolutionary-programming-based optimization of reduced-rank adaptive filters for reference generation in active power filters," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 910- 916, Aug 2004.  Full Text Link


4. 21.     W. Panusittikorn, Min Cheol Lee, P.I. Ro, "Modeling and sliding-mode control of friction-based object transport using two-mode ultrasonic excitation," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 917- 926, Aug 2004.  Full Text Link


4. 22.     Sewan Choi, M. Jang, "A reduced-rating hybrid filter to suppress neutral current harmonics in three-phase four-wire systems," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 927- 930, Aug 2004.  Full Text Link


4. 23.     Jee-Hoon Jung, Gang-Youl Jeong, Bong-Hwan Kwon, "Stability improvement of V/f-controlled induction motor drive systems by a dynamic current compensator," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 930- 933, Aug 2004.  Full Text Link


4. 24.     Ming Tsung Tsai, "Design of a compact series-connected AC Voltage regulator with an improved control algorithm," Trans. on Industrial Electronics, vol. 51, no. 4, pp. 933- 936, Aug 2004.  Full Text Link

Volume 51,  Number 5, Oct 2004           Access to the journal on IEEE XPLORE     IE Transactions Home Page



5. 1.     Y. Uchimura, T. Yakoh, "Bilateral robot system on the real-time network structure," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 940- 946, Oct 2004.  Full Text Link


5. 2.     K. Itoh, M. Iwasaki, N. Matsui, "Optimal design of robust vibration suppression controller using genetic algorithms," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 947- 953, Oct 2004.  Full Text Link


5. 3.     Y. Hori, "Future vehicle driven by electricity and Control-research on four-wheel-motored "UOT electric march II"," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 954- 962, Oct 2004.  Full Text Link


5. 4.     A. Rojko, K. Jezernik, "Sliding-mode motion controller with adaptive fuzzy disturbance estimation," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 963- 971, Oct 2004.  Full Text Link


5. 5.     K. Loffler, M. Gienger, F. Pfeiffer, H. Ulbrich, "Sensors and control concept of a biped robot," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 972- 980, Oct 2004.  Full Text Link


5. 6.     Jin Zhao, B.K. Bose, "Neural-network-based waveform Processing and Delayless filtering in power electronics and AC drives," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 981- 991, Oct 2004.  Full Text Link


5. 7.     A. Emadi, "Modeling of power electronic loads in AC distribution systems using the generalized State-space averaging method," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 992- 1000, Oct 2004.  Full Text Link


5. 8.     V. Dinavahi, R. Iravani, R. Bonert, "Design of a real-time digital Simulator for a D-STATCOM system," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1001- 1008, Oct 2004.  Full Text Link


5. 9.     B.-R. Lin, Yung-Chuan Lee, "Three-phase power quality compensator under the unbalanced sources and nonlinear loads," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1009- 1017, Oct 2004.  Full Text Link


5. 10.     P. Mattavelli, F.P. Marafao, "Repetitive-based control for selective harmonic compensation in active power filters," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1018- 1024, Oct 2004.  Full Text Link


5. 11.     S.R. Bowes, A. Sevinc, D. Holliday, "New natural observer applied to speed-sensorless DC servo and induction motors," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1025- 1032, Oct 2004.  Full Text Link


5. 12.     M. Hinkkanen, "Analysis and design of full-order flux observers for sensorless induction motors," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1033- 1040, Oct 2004.  Full Text Link


5. 13.     V.-M. Leppanen, J. Luomi, "Speed-sensorless induction Machine control for zero speed and frequency," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1041- 1047, Oct 2004.  Full Text Link


5. 14.     C. Lascu, A.M. Trzynadlowski, "A sensorless hybrid DTC drive for high-volume low-cost applications," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1048- 1055, Oct 2004.  Full Text Link


5. 15.     D. Casadei, G. Serra, A. Tani, L. Zarri, "Theoretical and experimental analysis for the RMS current ripple minimization in induction motor drives controlled by SVM technique," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1056- 1065, Oct 2004.  Full Text Link


5. 16.     H.F. Hofmann, S.R. Sanders, A. EL-Antably, "Stator-flux-oriented vector control of synchronous reluctance Machines with maximized efficiency," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1066- 1072, Oct 2004.  Full Text Link


5. 17.     M.B. de Rossiter Correa, C.B. Jacobina, E.R.C. da Silva, A.M.N. Lima, "Vector control strategies for single-phase induction motor drive systems," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1073- 1080, Oct 2004.  Full Text Link


5. 18.     M.A. Jabbar, A.M. Khambadkone, Zhang Yanfeng, "Space-vector Modulation in a two-phase induction motor drive for constant-power operation," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1081- 1088, Oct 2004.  Full Text Link


5. 19.     G. Poddar, V.T. Ranganathan, "Sensorless field-oriented control for double-inverter-fed wound-rotor induction motor drive," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1089- 1096, Oct 2004.  Full Text Link


5. 20.     J.R. Stack, R.G. Harley, T.G. Habetler, "An amplitude Modulation detector for fault diagnosis in rolling element bearings," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1097- 1102, Oct 2004.  Full Text Link


5. 21.     J.M. Correa, F.A. Farret, L.N. Canha, M.G. Simoes, "An electrochemical-based fuel-cell model suitable for electrical engineering automation approach," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1103- 1112, Oct 2004.  Full Text Link


5. 22.     L. Ben-Brahim, "On the compensation of dead time and zero-current crossing for a PWM-inverter-controlled AC servo drive," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1113- 1118, Oct 2004.  Full Text Link


5. 23.     D.O. Neacsu, "Current control with fast transient for three-phase AC/DC boost converters," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1117- 1121, Oct 2004.  Full Text Link


5. 24.     S. Kansal, G. Cook, "Correction to “Use of a Sinusoidal Series for Modeling Discrete Windowed Data as an Alternative to Interpolation”," Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1122- 1122, Oct 2004.  Full Text Link

Volume 51,  Number 6, Dec 2004           Access to the journal on IEEE XPLORE     IE Transactions Home Page



6. 1.     Lingfeng Wang, Bin Huang, Kay Chen Tan, "Fault-tolerant vibration control in a networked and embedded rocket fairing system," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1127- 1141, Dec 2004.  Full Text Link


6. 2.     D.P. Buse, Q.H. Wu, "Mobile agents for remote control of distributed systems," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1142- 1149, Dec 2004.  Full Text Link


6. 3.     Kyung Chang Lee, Man Ho Kim, Suk Lee, Hong Hee Lee, "IEEE-1451-based smart module for in-vehicle networking systems of intelligent vehicles," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1150- 1158, Dec 2004.  Full Text Link


6. 4.     P. Marti, J. Yepez, M. Velasco, R. Villa, J.M. Fuertes, "Managing quality-of-control in network-based control systems by controller and message scheduling co-design," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1159- 1167, Dec 2004.  Full Text Link


6. 5.     J. Garcia, F.R. Palomo, A. Luque, C. Aracil, J.M. Quero, D. Carrion, F. Gamiz, P. Revilla, J. Perez-Tinao, M. Moreno, P. Robles, L.G. Franquelo, "Reconfigurable distributed network control system for industrial plant automation," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1168- 1180, Dec 2004.  Full Text Link


6. 6.     D. Lim, A. Anbuky, "A distributed industrial battery management network," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1181- 1193, Dec 2004.  Full Text Link


6. 7.     A. Prayati, C. Koulamas, S. Koubias, G. Papadopoulos, "A methodology for the development of distributed real-time control applications with focus on task allocation in heterogeneous systems," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1194- 1207, Dec 2004.  Full Text Link


6. 8.     C. Koulamas, S. Koubias, G. Papadopoulos, "Using cut-through forwarding to retain the real-time properties of Profibus over hybrid wired/wireless architectures," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1208- 1217, Dec 2004.  Full Text Link


6. 9.     Y. Tipsuwan, Mo-Yuen Chow, "Gain scheduler middleware: a methodology to enable existing controllers for networked control and teleoperation - part I: networked control," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1218- 1227, Dec 2004.  Full Text Link


6. 10.     Y. Tipsuwan, Mo-Yuen Chow, "Gain scheduler middleware: a methodology to enable existing controllers for networked control and teleoperation-part II: teleoperation," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1228- 1237, Dec 2004.  Full Text Link


6. 11.     M. Di Santo, A. Vaccaro, D. Villacci, E. Zimeo, "A distributed architecture for online power systems security analysis," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1238- 1248, Dec 2004.  Full Text Link


6. 12.     S. Soucek, T. Sauter, "Quality of service concerns in IP-based control systems," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1249- 1258, Dec 2004.  Full Text Link


6. 13.     N. Ando, P. Korondi, H. Hashimoto, "Networked telemicromanipulation systems "Haptic Loupe"," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1259- 1271, Dec 2004.  Full Text Link


6. 14.     H. Takahashi, H. Nishi, K. Ohnishi, "Autonomous decentralized control for formation of multiple mobile robots considering ability of robot," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1272- 1279, Dec 2004.  Full Text Link


6. 15.     O. Ojo, "The generalized discontinuous PWM scheme for three-phase voltage source inverters," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1280- 1289, Dec 2004.  Full Text Link


6. 16.     In-Dong Kim, Eui-Cheol Nho, Heung-Geun Kim, Jong Sun Ko, "A generalized Undeland snubber for flying capacitor multilevel inverter and converter," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1290- 1296, Dec 2004.  Full Text Link


6. 17.     A. Sangswang, C.O. Nwankpa, "Noise characteristics of DC-DC boost converters: experimental validation and performance evaluation," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1297- 1304, Dec 2004.  Full Text Link


6. 18.     S.C.O. Mathuna, P. Byrne, G. Duffy, W. Chen, M. Ludwig, T. O'Donnell, P. McCloskey, M. Duffy, "Packaging and integration technologies for future high-frequency power supplies," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1305- 1312, Dec 2004.  Full Text Link


6. 19.     Tzu-Yen Chang, Xu Wang, D.A. Evans, S.L. Roberson, J.P. Zheng, "Characterization of tantalum oxide-ruthenium oxide hybrid capacitors," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1313- 1317, Dec 2004.  Full Text Link


6. 20.     M. Hinkkanen, J. Luomi, "Stabilization of regenerating-mode operation in sensorless induction motor drives by full-order flux observer design," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1318- 1328, Dec 2004.  Full Text Link


6. 21.     G. Poddar, V.T. Ranganathan, "Direct torque and frequency control of double-inverter-fed slip-ring induction motor drive," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1329- 1337, Dec 2004.  Full Text Link


6. 22.     M.A. Jabbar, A.M. Khambadkone, Guo Chun, "Quasi-resonant-converters-based high-efficiency spindle motor drives for magnetic data storage," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1338- 1343, Dec 2004.  Full Text Link


6. 23.     Liang-Rui Chen, "PLL-based battery charge circuit topology," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1344- 1346, Dec 2004.  Full Text Link


6. 24.     L.S. Kei, K. Sridharan, T. Srikanthan, "Hardware-efficient schemes for logarithmic approximation and binary search with application to visibility graph construction," Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1346- 1348, Dec 2004.  Full Text Link
IEEE Transactions on Industrial Electronics IEEE Transactions on Industrial Electronics IEEE Transactions on Industrial Electronics IEEE Transactions on Industrial Electronics IEEE Transactions on Industrial Electronics

IEEE Transactions on Industrial Electronics IEEE Home Page  IEEE Transactions on Industrial Electronics  IES Home Page

Volume 52,  Number 1, Feb 2005           Access to the journal on IEEE XPLORE     IE Transactions Home Page


Special Section Papers on Modern Rectifiers - Part 1


1. 1.     J.R. Rodriguez, J.W. Dixon, J.R. Espinoza, J. Pontt, P. Lezana, "PWM regenerative rectifiers: state of the art," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 5- 22, Feb 2005.  Full Text Link


1. 2.     G. Moschopoulos, P. Jain, "Single-phase single-stage power-factor-corrected converter topologies," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 23- 35, Feb 2005.  Full Text Link


1. 3.     J.-C. Crebier, B. Revol, J.P. Ferrieux, "Boost-chopper-derived PFC rectifiers: interest and reality," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 36- 45, Feb 2005.  Full Text Link


1. 4.     A. Fernandez, J. Sebastian, M.M. Hernando, P. Villegas, J. Garcia, "Helpful hints to select a power-factor-correction solution for low- and medium-power single-phase power supplies," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 46- 55, Feb 2005.  Full Text Link


1. 5.     F.J. Azcondo, C. Branas, R. Casanueva, S. Bracho, "Power-mode-controlled power-factor corrector for electronic ballast," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 56- 65, Feb 2005.  Full Text Link


1. 6.     E. Figueres, J.-M. Benavent, G. Garcera, M. Pascual, "Robust control of power-factor-correction rectifiers with fast dynamic response," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 66- 76, Feb 2005.  Full Text Link


1. 7.     A. Fernandez, J. Sebastian, P. Villegas, M.M. Hernando, D.G. Lamar, "Dynamic limits of a power-factor preregulator," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 77- 87, Feb 2005.  Full Text Link


1. 8.     Koen De Gusseme, D.M. Van de Sype, A.P.M. Van den Bossche, J.A. Melkebeek, "Digitally controlled boost power-factor-correction converters operating in both continuous and discontinuous conduction mode," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 88- 97, Feb 2005.  Full Text Link


1. 9.     Z.Z. Ye, M.M. Jovanovic, "Implementation and performance evaluation of DSP-based control for constant-frequency discontinuous-conduction-mode boost PFC front end," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 98- 107, Feb 2005.  Full Text Link


1. 10.     D.M. Van de Sype, Koen De Gusseme, A.P.M. Van den Bossche, J.A. Melkebeek, "Duty-ratio feedforward for digitally controlled boost PFC converters," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 108- 115, Feb 2005.  Full Text Link


1. 11.     M. Ferdowsi, A. Emadi, "Pulse regulation control technique for integrated high-quality rectifier-regulators," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 116- 124, Feb 2005.  Full Text Link


1. 12.     Lon-Kou Chang, Hsing-Fu Liu, "A novel forward AC/DC converter with input current shaping and fast output voltage regulation via reset winding," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 125- 131, Feb 2005.  Full Text Link


1. 13.     N. Vazquez, J. Lopez, J. Arau, C. Hernandez, E. Rodriguez, "A different approach to implement an active input current shaper," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 132- 138, Feb 2005.  Full Text Link


1. 14.     Tsai-Fu Wu, Jin-Chyuan Hung, Sheng-Yu Tseng, Yaow-Ming Chen, "A single-stage fast regulator with PFC based on an asymmetrical half-bridge topology," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 139- 150, Feb 2005.  Full Text Link


1. 15.     F. Forest, T.A. Meynard, S. Faucher, F. Richardeau, J.-J. Huselstein, C. Joubert, "Using the multilevel imbricated cells topologies in the design of low-power power-factor-corrector converters," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 151- 161, Feb 2005.  Full Text Link


1. 16.     J. Minibock, J.W. Kolar, "Novel concept for mains voltage proportional input current shaping of a VIENNA rectifier eliminating controller multipliers," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 162- 170, Feb 2005.  Full Text Link


1. 17.     M.A. Perez, J.R. Espinoza, J.R. Rodriguez, P. Lezana, "Regenerative medium-voltage AC drive based on a multicell arrangement with reduced energy storage requirements," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 171- 180, Feb 2005.  Full Text Link


1. 18.     In-Dong Kim, Eui-Cheol Nho, "Module-type switching rectifier for cathodic protection of underground and maritime metallic structures," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 181- 189, Feb 2005.  Full Text Link

Power Electronics


1. 19.     J. Pou, R. Pindado, D. Boroyevich, "Voltage-balance limits in four-level diode-clamped converters with passive front ends," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 190- 196, Feb 2005.  Full Text Link


1. 20.     L. Yacoubi, K. Al-Haddad, F. Fnaiech, L.-A. Dessaint, "A DSP-based implementation of a new nonlinear control for a three-phase neutral point clamped boost rectifier prototype," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 197- 205, Feb 2005.  Full Text Link


1. 21.     P. Mattavelli, "An improved deadbeat control for UPS using disturbance observers," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 206- 212, Feb 2005.  Full Text Link


1. 22.     Xinbo Ruan, Bin Li, "Zero-voltage and zero-current-switching PWM hybrid full-bridge three-level converter," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 213- 220, Feb 2005.  Full Text Link


1. 23.     L.H.S.C. Barreto, M.G. Sebastiao, L.C. de Freitas, E.A.A. Coelho, V.J. Farias, J.B. Vieira, "Analysis of a soft-switched PFC boost converter using analog and digital control circuits," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 221- 227, Feb 2005.  Full Text Link


1. 24.     Gwan-Bon Koo, Gun-Woo Moon, Myung-Joong Youn, "New zero-voltage-switching phase-shift full-bridge converter with low conduction losses," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 228- 235, Feb 2005.  Full Text Link


1. 25.     E. Dallago, G. De Leo, G. Sassone, "A current-mode power sigma-delta modulator for audio applications," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 236- 242, Feb 2005.  Full Text Link


1. 26.     P. Poulichet, F. Costa, E. Laboure, "A new high-current large-bandwidth DC active current probe for power electronics measurements," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 243- 254, Feb 2005.  Full Text Link
 

Drives Control

1. 27.     O. Wallmark, L. Harnefors, O. Carlson, "An improved speed and position estimator for salient permanent-magnet synchronous motors," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 255- 262, Feb 2005.  Full Text Link


1. 28.     H. Rehman, "Elimination of the stator resistance sensitivity and voltage sensor requirement problems for DFO control of an induction Machine," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 263- 269, Feb 2005.  Full Text Link


1. 29.     Kwangjin Yang, Youngjin Choi, Wan Kyun Chung, "On the tracking performance improvement of optical disk drive servo systems using error-based disturbance observer," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 270- 279, Feb 2005.  Full Text Link

Emerging Technology


1. 30.     D. Villacci, G. Bontempi, A. Vaccaro, M. Birattari, "The role of learning methods in the dynamic assessment of power components loading capability," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 280- 290, Feb 2005.  Full Text Link


1. 31.     Kuan-Hung Chen, Tzi-Dar Chiueh, Shi-Chung Chang, P.B. Luh, "A 1600-MIPS parallel processor IC for job-shop scheduling," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 291- 299, Feb 2005.  Full Text Link


1. 32.     M. Iwasaki, M. Miwa, N. Matsui, "GA-based evolutionary identification algorithm for unknown structured mechatronic systems," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 300- 305, Feb 2005.  Full Text Link
 

Robotics And Vision

1. 33.     M.A. Al-Mouhamed, O. Toker, A. Al-Harthy, "A 3-D vision-based man-machine interface for hand-controlled telerobot," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 306- 319, Feb 2005.  Full Text Link


1. 34.     Choon-Young Lee, J.-J. Lee, "Multiple neuro-adaptive control of robot manipulators using visual cues," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 320- 326, Feb 2005.  Full Text Link

Signal Processing And Control


1. 35.     Tzung-Her Chen, G. Horng, Wei-Bin Lee, "A publicly verifiable copyright-proving scheme resistant to malicious attacks," Trans. on Industrial Electronics, vol. 52, no. 1, pp. 327- 334, Feb 2005.  Full Text Link

 

 

Volume 52,  Number 2, Apr 2005           Access to the journal on IEEE XPLORE     IE Transactions Home Page

 

Special Section Papers on Modern Rectifiers - Part 2

2. 1.     S.K. Mazumder, "Continuous and discrete variable-structure controls for parallel three-phase boost rectifier," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 340- 354, Apr 2005.  Full Text Link


2. 2.     Guozhu Chen, K.M. Smedley, "Steady-State and dynamic study of one-cycle-controlled three-phase power-factor correction," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 355- 362, Apr 2005.  Full Text Link


2. 3.     R.P. Burgos, E.P. Wiechmann, J. Holtz, "Complex state-space modeling and nonlinear control of active front-end converters," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 363- 377, Apr 2005.  Full Text Link


2. 4.     C. Cecati, A. Dell'Aquila, A. Lecci, M. Liserre, "Implementation issues of a fuzzy-logic-based three-phase active rectifier employing only Voltage sensors," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 378- 385, Apr 2005.  Full Text Link


2. 5.     S. Chattopadhyay, V. Ramanarayanan, "A Voltage-sensorless control method to balance the input currents of a three-wire boost rectifier under unbalanced input Voltages condition," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 386- 398, Apr 2005.  Full Text Link


2. 6.     M. Baumann, J.W. Kolar, "A novel control concept for reliable operation of a three-phase three-switch buck-type unity-power-factor rectifier with integrated boost output stage under heavily unbalanced mains condition," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 399- 409, Apr 2005.  Full Text Link


2. 7.     M. Cichowlas, M. Malinowski, M.P. Kazmierkowski, D.L. Sobczuk, P. Rodriguez, J. Pou, "Active filtering function of three-phase PWM boost rectifier under different line voltage conditions," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 410- 419, Apr 2005.  Full Text Link


2. 8.     S. Fukuda, R. Imamura, "Application of a sinusoidal internal model to current control of three-phase utility-interface converters," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 420- 426, Apr 2005.  Full Text Link


2. 9.     Chien-Ming Wang, "A novel zero-Voltage-switching PWM boost rectifier with high power factor and low conduction losses," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 427- 435, Apr 2005.  Full Text Link


2. 10.     P. Bajec, B. Pevec, D. Voncina, D. Miljavec, J. Nastran, "Extending the low-speed operation range of PM Generator in automotive applications using novel AC-DC converter control," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 436- 443, Apr 2005.  Full Text Link


2. 11.     Vitor Fernao Pires, J.F. Silva, "Three-phase single-stage four-switch PFC buck-boost-type rectifier," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 444- 453, Apr 2005.  Full Text Link


2. 12.     H. Ertl, J.W. Kolar, "A constant output current three-phase diode bridge rectifier employing a novel "Electronic Smoothing Inductor"," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 454- 461, Apr 2005.  Full Text Link


2. 13.     M. Marchesoni, P. Segarich, E. Soressi, "A new control strategy for neutral-point-clamped active rectifiers," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 462- 470, Apr 2005.  Full Text Link


2. 14.     R. Teichmann, M. Malinowski, S. Bernet, "Evaluation of three-level rectifiers for low-voltage utility applications," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 471- 481, Apr 2005.  Full Text Link


2. 15.     J.R. Rodriguez, J. Pontt, R. Huerta, G. Alzamora, N. Becker, S. Kouro, P. Cortes, P. Lezana, "Resonances in a high-power active-front-end rectifier system," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 482- 488, Apr 2005.  Full Text Link
 

Drive Control

2. 16.     R. Bettendorf, "Winder software testing with real-time dynamic Simulation," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 489- 498, Apr 2005.  Full Text Link


2. 17.     C.-K. Lai, Kuo-Kai Shyu, "A novel motor drive design for incremental motion system via sliding-mode control method," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 499- 507, Apr 2005.  Full Text Link


2. 18.     Mengesha Mamo, K. Ide, M. Sawamura, J. Oyama, "Novel rotor position extraction based on carrier frequency component method (CFCM) using two reference frames for IPM drives," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 508- 514, Apr 2005.  Full Text Link


2. 19.     A.F. Moreira, P.M. Santos, T.A. Lipo, G. Venkataramanan, "Filter networks for long cable drives and their influence on motor voltage distribution and common-mode currents," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 515- 522, Apr 2005.  Full Text Link


2. 20.     M. Salo, H. Tuusa, "vector-controlled PWM current-source-inverter-fed induction motor drive with a new stator current control method," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 523- 531, Apr 2005.  Full Text Link


2. 21.     M. Cirrincione, M. Pucci, "An MRAS-based sensorless high-performance induction motor drive with a predictive adaptive model," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 532- 551, Apr 2005.  Full Text Link

Power Electronics


2. 22.     L.H.S.C. Barreto, E.A.A. Coelho, V.J. Farias, J.C. de Oliveira, L.C. de Freitas, Jr. Joao Batista Vieira, "A quasi-resonant quadratic boost converter using a single resonant network," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 552- 557, Apr 2005.  Full Text Link


2. 23.     A. Kotsopoulos, P.J.M. Heskes, M.J. Jansen, "Zero-crossing distortion in grid-connected PV inverters," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 558- 565, Apr 2005.  Full Text Link


2. 24.     M. Castilla, L. Garcia_de_Vicuna, J.M. Guerrero, J. Matas, J. Miret, "Sliding-mode control of quantum series-parallel resonant converters via input-output linearization," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 566- 575, Apr 2005.  Full Text Link
 

Signal Processing And Control

2. 25.     Byung-Moon Han, Byong-Yeul Bae, S.J. Ovaska, "Reference signal generator for active power filters using improved adaptive predictive filter," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 576- 584, Apr 2005.  Full Text Link


2. 26.     Chin-Shyurng Fahn, Herman Sun, "Development of a data glove with reducing sensors based on magnetic induction," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 585- 594, Apr 2005.  Full Text Link

Emerging Technology


2. 27.     R. Zurawski, "Petri net models, functional abstractions, and reduction techniques: applications to the design of automated manufacturing systems," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 595- 609, Apr 2005.  Full Text Link


2. 28.     Mingxuan Sun, Youyi Wang, D. Wang, "Variable-structure repetitive control: a discrete-time strategy," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 610- 616, Apr 2005.  Full Text Link


2. 29.     Leo Ho Wai Yeung, W.K.S. Tang, "A hybrid genetic approach for container loading in logistics industry," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 617- 627, Apr 2005.  Full Text Link


2. 30.     F. Delgado, M.E. Magana, "A fuzzy logic controller design and simulation for a sawmill bucking system," Trans. on Industrial Electronics, vol. 52, no. 2, pp. 628- 634, Apr 2005.  Full Text Link

 

Volume 52,  Number 3, Jun 2005           Access to the journal on IEEE XPLORE     IE Transactions Home Page


 

Special Section Papers on Modern Rectifiers - Part 3


3. 1.     C. Rech, J.R. Pinheiro, "Line current harmonics reduction in multipulse connection of asymmetrically loaded rectifiers," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 640- 652, Jun 2005.  Full Text Link


3. 2.     J. Dixon, L. Moran, "A clean four-quadrant sinusoidal power rectifier using multistage converters for subway applications," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 653- 661, Jun 2005.  Full Text Link


3. 3.     M. Glinka, R. Marquardt, "A new AC/AC multilevel converter family," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 662- 669, Jun 2005.  Full Text Link


3. 4.     A. Dell'Aquila, M. Liserre, V.G. Monopoli, P. Rotondo, "An energy-based control for an n-H-bridges multilevel active rectifier," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 670- 678, Jun 2005.  Full Text Link


3. 5.     E. Sanchis, E. Maset, J.A. Carrasco, J.B. Ejea, A. Ferreres, E. Dede, V. Esteve, J. Jordan, R. Garcia-Gil, "Zero-current-switched three-phase SVM-controlled buck rectifier," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 679- 688, Jun 2005.  Full Text Link


3. 6.     Chien-Ming Wang, "A novel ZCS-PWM power-factor preregulator with reduced conduction losses," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 689- 700, Jun 2005.  Full Text Link


3. 7.     M.M. Jovanovic, Y. Jang, "State-of-the-art, single-phase, active power-factor-correction techniques for high-power applications - an overview," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 701- 708, Jun 2005.  Full Text Link


3. 8.     Huang-Jen Chiu, Li-Wei Lin, "A high-efficiency soft-switched AC/DC converter with current-doubler synchronous rectification," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 709- 718, Jun 2005.  Full Text Link


3. 9.     P. Ide, F. Schafmeister, N. Frohleke, H. Grotstollen, "Enhanced control scheme for three-phase three-level rectifiers at partial load," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 719- 726, Jun 2005.  Full Text Link


3. 10.     Guanghai Gong, M.L. Heldwein, U. Drofenik, J. Minibock, K. Mino, J.W. Kolar, "Comparative evaluation of three-phase high-power-factor AC-DC converter concepts for application in future More Electric Aircraft," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 727- 737, Jun 2005.  Full Text Link


3. 11.     J.R. Rodriguez, J. Pontt, C. Silva, E.P. Wiechmann, P.W. Hammond, F.W. Santucci, R. Alvarez, R. Musalem, S. Kouro, P. Lezana, "Large current rectifiers: State of the art and future trends," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 738- 746, Jun 2005.  Full Text Link


3. 12.     P. Ladoux, G. Postiglione, H. Foch, J. Nuns, "A comparative study of AC/DC converters for high-power DC arc furnace," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 747- 757, Jun 2005.  Full Text Link


3. 13.     J.C. Wiseman, Bin Wu, "Active damping control of a high-power PWM current-source rectifier for line-current THD reduction," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 758- 764, Jun 2005.  Full Text Link


3. 14.     R. Garcia-Gil, J.M. Espi, E.J. Dede, E. Sanchis-Kilders, "A bidirectional and isolated three-phase rectifier with soft-switching operation," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 765- 773, Jun 2005.  Full Text Link


3. 15.     S. Rees, "New cascaded control system for current-source rectifiers," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 774- 784, Jun 2005.  Full Text Link

Drive Control


3. 16.     A.A. Naassani, E. Monmasson, J.-P. Louis, "Synthesis of direct torque and rotor flux control algorithms by means of sliding-mode theory," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 785- 799, Jun 2005.  Full Text Link


3. 17.     H. Nakai, H. Ohtani, E. Satoh, Y. Inaguma, "Development and testing of the torque control for the permanent-magnet synchronous motor," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 800- 806, Jun 2005.  Full Text Link


3. 18.     C. De Angelo, G. Bossio, J. Solsona, G.O. Garcia, M.I. Valla, "A rotor position and speed observer for permanent-magnet motors with nonsinusoidal EMF waveform," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 807- 813, Jun 2005.  Full Text Link


3. 19.     Y.X. Su, C.H. Zheng, B.Y. Duan, "Automatic disturbances rejection controller for precise motion control of permanent-magnet synchronous motors," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 814- 823, Jun 2005.  Full Text Link


3. 20.     V.T. Somasekhar, K. Gopakumar, M.R. Baiju, K.K. Mohapatra, L. Umanand, "A multilevel inverter system for an induction motor with open-end windings," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 824- 836, Jun 2005.  Full Text Link


3. 21.     Rong-Jong Wai, Kuo-Min Lin, "Robust decoupled control of direct field-oriented induction motor drive," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 837- 854, Jun 2005.  Full Text Link
 

Power Electronics

3. 22.     T. Bruckner, S. Bernet, H. Guldner, "The active NPC converter and its loss-balancing control," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 855- 868, Jun 2005.  Full Text Link


3. 23.     T. Senanayake, T. Ninomiya, "An improved topology of inductor-switching DC-DC converter," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 869- 878, Jun 2005.  Full Text Link


3. 24.     Dae-Wook Kang, Byoung-Kuk Lee, Jae-Hyun Jeon, Tae-Jin Kim, Dong-Seok Hyun, "A symmetric carrier technique of CRPWM for voltage balance method of flying-capacitor multilevel inverter," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 879- 888, Jun 2005.  Full Text Link


3. 25.     Jin-Ha Choi, Jung-Min Kwon, Jee-Hoon Jung, Bong-Hwan Kwon, "High-performance online UPS using three-leg-type converter," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 889- 897, Jun 2005.  Full Text Link
 

Robotics And Vision

3. 26.     Meng Joo Er, Chang Deng, "Obstacle avoidance of a mobile robot using hybrid learning approach," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 898- 905, Jun 2005.  Full Text Link


3. 27.     K.C. Tan, Y.J. Chen, K.K. Tan, T.H. Lee, "Task-oriented developmental learning for humanoid robots," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 906- 914, Jun 2005.  Full Text Link


3. 28.     S. Takagi, N. Uchiyama, "Robust control system design for SCARA robots using adaptive pole placement," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 915- 921, Jun 2005.  Full Text Link


3. 29.     Kune-Shiang Tzeng, D.C. Tzeng, Jian-Shiang Chen, "An enhanced iterative learning control scheme using wavelet transform," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 922- 924, Jun 2005.  Full Text Link


3. 30.     Xiaoli Li, Xin Yao, "Multi-scale statistical process monitoring in machining," Trans. on Industrial Electronics, vol. 52, no. 3, pp. 924- 927, Jun 2005.  Full Text Link

 

Volume 52,  Number 4, Aug 2005           Access to the journal on IEEE XPLORE     IE Transactions Home Page


Special Section Papers on Optomechatronics


4. 1.     H. Cho, M.Y. Kim, "Optomechatronic Technology: The Characteristics and Perspectives," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 932- 943, Aug 2005.  Full Text Link


4. 2.     W. Baetz, J. Braasch, W. Holzapfel, "Noise-Modulated Optomechatronic Distance-Measuring System," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 944- 952, Aug 2005.  Full Text Link


4. 3.     K.S. Moon, M. Levy, Y.K. Hong, H.K. Park, "Axial Displacement Measurement of a Single-Crystal Actuator Using Phase-Shift Interferometry," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 953- 959, Aug 2005.  Full Text Link


4. 4.     Y. Yamada, M. Morizono, U. Umetani, T. Takahashi, "Highly Soft Viscoelastic Robot Skin With a Contact Object-Location-Sensing Capability," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 960- 968, Aug 2005.  Full Text Link


4. 5.     C.I. Nitu, B.S. Gramescu, C.D.P. Comeaga, A.O. Trufasu, "Optomechatronic System for Position Detection of a Mobile Mini-Robot," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 969- 973, Aug 2005.  Full Text Link


4. 6.     S. He, R. BenMrad, "Large-Stroke Microelectrostatic Actuators for Vertical Translation of Micromirrors Used in Adaptive Optics," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 974- 983, Aug 2005.  Full Text Link


4. 7.     T. Oguchi, M. Hayase, T. Hatsuzawa, "Micromachined Display Device Using Sheet Waveguide and Multicantilevers Driven by Electrostatic Force," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 984- 991, Aug 2005.  Full Text Link


4. 8.     Y. Katagiri, H. Takesue, E. Hashimoto, "Wavelength-Scanning Optical Bandpass Filters Based on Optomechatronics for Optical-Frequency Sweepers," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 992- 1004, Aug 2005.  Full Text Link


4. 9.     E.T. Enikov, L.L. Minkov, S. Clark, "Microassembly Experiments With Transparent Electrostatic Gripper Under Optical and Vision-Based Control," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1005- 1012, Aug 2005.  Full Text Link


4. 10.     G. Yang, J.A. Gaines, B.J. Nelson, "Optomechatronic Design of Microassembly Systems for Manufacturing Hybrid Microsystems," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1013- 1023, Aug 2005.  Full Text Link


4. 11.     L. Deng, F. Janabi-Sharifi, W.J. Wilson, "Hybrid Motion Control and Planning Strategies for Visual Servoing," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1024- 1040, Aug 2005.  Full Text Link


4. 12.     T. Takeguchi, S. Kaneko, "Using Depth Aspect Images for Robust and Efficient Search of Multiple Objects in Optomechatronic Sensing," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1041- 1049, Aug 2005.  Full Text Link


4. 13.     Y.-S. Kim, S.-J. Lee, N.-C. Park, Y.-P. Park, "Design of a Superparaboloidal Solid Immersion Mirror for Optomechatronic Near-Field Recording," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1050- 1055, Aug 2005.  Full Text Link


4. 14.     Kyung-Soo Kim, "Analysis of optical data storage systems - tracking performance with eccentricity," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1056- 1062, Aug 2005.  Full Text Link


4. 15.     S.J. Hong, G.S. May, "Neural-Network-Based Sensor Fusion of Optical Emission and Mass Spectroscopy Data for Real-Time Fault Detection in Reactive Ion Etching," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1063- 1072, Aug 2005.  Full Text Link


4. 16.     C.-S. Cho, B.-M. Chung, M.-J. Park, "Development of Real-Time Vision-Based Fabric Inspection System," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1073- 1079, Aug 2005.  Full Text Link
 

Power Electronics

4. 17.     J. Rodriguez, P.W. Hammond, J. Pontt, R. Musalem, P. Lezana, M.J. Escobar, "Operation of a Medium-Voltage Drive Under Faulty Conditions," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1080- 1085, Aug 2005.  Full Text Link


4. 18.     R.P. Burgos, E.P. Wiechmann, "Extended Voltage Swell Ride-Through Capability for PWM Voltage-Source Rectifiers," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1086- 1098, Aug 2005.  Full Text Link


4. 19.     C.-M. Wang, "A Novel Single-Stage Series-Resonant Buck–Boost Inverter," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1099- 1108, Aug 2005.  Full Text Link


4. 20.     A.K.S. Bhat, R. Venkatraman, "A Soft-Switched Full-Bridge Single-Stage AC-

4. 21.     C.-M. Wang, "A New Family of Zero-Current-Switching (ZCS) PWM Converters," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1117- 1125, Aug 2005.  Full Text Link


4. 22.     J.M. Guerrero, L. GarciadeVicuna, J. Matas, M. Castilla, J. Miret, "Output Impedance Design of Parallel-Connected UPS Inverters With Wireless Load-Sharing Control," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1126- 1135, Aug 2005.  Full Text Link


4. 23.     L. Asiminoaei, R. Teodorescu, F. Blaabjerg, U. Borup, "Implementation and Test of an Online Embedded Grid Impedance Estimation Technique for PV Inverters," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1136- 1144, Aug 2005.  Full Text Link


4. 24.     N. Kasa, T. Iida, L. Chen, "Flyback Inverter Controlled by Sensorless Current MPPT for Photovoltaic Power System," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1145- 1152, Aug 2005.  Full Text Link

 

Drive Control


4. 25.     C. Cavallaro, A.O. DiTommaso, R. Miceli, A. Raciti, G.R. Galluzzo, M. Trapanese, "Efficiency Enhancement of Permanent-Magnet Synchronous Motor Drives by Online Loss Minimization Approaches," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1153- 1160, Aug 2005.  Full Text Link


4. 26.     Y.X. Su, C.H. Zheng, D. Sun, B.Y. Duan, "A Simple Nonlinear Velocity Estimator for High-Performance Motion Control," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1161- 1169, Aug 2005.  Full Text Link


4. 27.     A. Derdiyok, "Speed-Sensorless Control of Induction Motor Using a Continuous Control Approach of Sliding-Mode and Flux Observer," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1170- 1176, Aug 2005.  Full Text Link


4. 28.     G.K. Singh, K. Nam, S.K. Lim, "A Simple Indirect Field-Oriented Control Scheme for Multiphase Induction Machine," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1177- 1184, Aug 2005.  Full Text Link

Letters To The Editor


4. 29.     K. Sridharan, T.K. Priya, "The Design of a Hardware Accelerator for Real-Time Complete Visibility Graph Construction and Efficient FPGA Implementation," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1185- 1187, Aug 2005.  Full Text Link


4. 30.     H.-W. Kim, M.-J. Youn, K.-Y. Cho, "New Voltage Distortion Observer of PWM VSI for PMSM," Trans. on Industrial Electronics, vol. 52, no. 4, pp. 1188- 1192, Aug 2005.  Full Text Link

 

Volume 52,  Number 5, Oct 2005           Access to the jou