1. 1. C.C. Chan, K.T. Chau, "An overview of power electronics in electric vehicles," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 3-13, Feb.1997. Full Text Link
1. 2. H. Shimizu, J. Harada, C. Bland, K. Kawakami, L. Chan, "Advanced concepts in electric vehicle design," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 14-18, Feb.1997. Full Text Link
1. 3. M. Ehsani, K.M. Rahman, H.A. Toliyat, "Propulsion system design of electric and hybrid vehicles," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 19-27, Feb.1997. Full Text Link
1. 4. M. Terashima, T. Ashikaga, T. Mizuno, K. Natori, N. Fujiwara, M. Yada, "Novel motors and controllers for high-performance electric vehicle with four in-wheel motors," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 28-38, Feb.1997. Full Text Link
1. 5. F. Profumo, Zheng Zhang, A. Tenconi, "Axial flux machines drives: a new viable solution for electric cars ," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 39-45, Feb.1997. Full Text Link
1. 6. M.A. Rahman, Ruifeng Qin, "A permanent magnet hysteresis hybrid synchronous motor for electric vehicles," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 46-53, Feb.1997. Full Text Link
1. 7. N. Mutoh, S. Kaneko, T. Miyazaki, R. Masaki, S. Obara, "A torque controller suitable for electric vehicles," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 54-63, Feb.1997. Full Text Link
1. 8. A. Kawamura, N. Hoshi, Tae Woong Kim, T. Yokoyama, T. Kume, "Analysis of anti-directional-twin-rotary motor drive characteristics for electric vehicles," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 64-70, Feb.1997. Full Text Link
1. 9. Jih-Sheng Lai, "Resonant snubber-based soft-switching inverters for electric propulsion drives," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 71-80, Feb.1997. Full Text Link
1. 10. Yoon-Ho Kim, Hoi-Doo Ha, "Design of interface circuits with electrical battery models," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 81-86, Feb.1997. Full Text Link
1. 11. F. Blaabjerg, J.K. Pedersen, P. Thoegersen, "Improved modulation techniques for PWM-VSI drives," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 87-95, Feb.1997. Full Text Link
1. 12. S. Halasz, A.A.M. Hassan, Bui Tin Huu, "Optimal control of three-level PWM inverters," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 96-106, Feb.1997. Full Text Link
1. 13. Bum-Seok Suh, Dong-Seok Hyun, "A new n-level high voltage inversion system," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 107-115, Feb.1997. Full Text Link
1. 14. H. Ertl, J.W. Kolar, F.C. Zach, "Basic considerations and topologies of switched-mode assisted linear power amplifiers," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 116-123, Feb.1997. Full Text Link
1. 15. G.O. Beale, Mengli Li, "Robust temperature control for microwave heating of ceramics," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 124-131, Feb.1997. Full Text Link
1. 16. C. Boukouvalas, J. Kittler, R. Marik, M. Petrou, "Automatic color grading of ceramic tiles using machine vision," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 132-135, Feb.1997. Full Text Link
1. 17. D.F. Clark, T.J. Moir, "Application of a PLL and ALL noise reduction process in optical sensing systems," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 136-138, Feb.1997. Full Text Link
1. 18. C.A. Karybakas, T.L. Laopoulos, "Analysis of unlocked and acquisition operation of a phase-locked speed control system," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 138-140, Feb.1997. Full Text Link
1. 19. B.K. Bose, N.R. Patel, "A programmable cascaded low-pass filter-based flux synthesis for a stator flux-oriented vector-controlled induction motor drive," Trans. on Industrial Electronics, vol. 44, no. 1, pp. 140-143, Feb.1997. Full Text Link
2. 1. Jae-Hyeong Suh, Bum-Seok Suh, Dong-Seok Hyun, "A new snubber circuit for high efficiency and overvoltage limitation in three-level GTO inverters," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 145-156, Apr.1997. Full Text Link
2. 2. Chin-E Lin, Ming-Tsung Tsai, Wen-Inne Tsai, Ching-Lien Huang, "Consumption power feedback unit for power electronics burn-in test ," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 157-166, Apr.1997. Full Text Link
2. 3. T.A. Baginski, K.A. Thomas, S.L. Smith, "A high-voltage single-shot switch implemented with a MOSFET current source and avalanche diode," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 167-172, Apr.1997. Full Text Link
2. 4. A.M. Trzynadlowski, R.L. Kirlin, S.F. Legowski, "Space vector PWM technique with minimum switching losses and a variable pulse rate [for VSI]," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 173-181, Apr.1997. Full Text Link
2. 5. M. Pande, H. Jin, G. Joos, "Modulated integral control technique for compensating switch delays and nonideal DC buses in voltage-source inverters," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 182-190, Apr.1997. Full Text Link
2. 6. D. Leggate, R.J. Kerkman, "Pulse-based dead-time compensator for PWM voltage inverters," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 191-197, Apr.1997. Full Text Link
2. 7. J.R. Espinoza, G. Joos, "Current-source converter on-line pattern generator switching frequency minimization," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 198-206, Apr.1997. Full Text Link
2. 8. J.M. Alonso, P.J. Villegas, J. Diaz, C. Blanco, M. Rico, "A microcontroller-based emergency ballast for fluorescent lamps," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 207-216, Apr.1997. Full Text Link
2. 9. D.K. Jackson, S.B. Leeb, A.H. Mitwalli, P. Narvaez, D. Fusco, E.C. Lupton, "Power electronic drives for magnetically triggered gels," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 217-225, Apr.1997. Full Text Link
2. 10. L.A. Belfore, A.-R.A. Arkadan, "Modeling faulted switched reluctance motors using evolutionary neural networks," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 226-233, Apr.1997. Full Text Link
2. 11. Ju Jin, T. Higuchi, "Direct electrostatic levitation and propulsion," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 234-239, Apr.1997. Full Text Link
2. 12. Jinsheng Jiang, Joachim Holtz, "High dynamic speed sensorless AC drive with on-line model parameter tuning for steady-state accuracy," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 240-246, Apr.1997. Full Text Link
2. 13. S. Wade, W. Dunnigan, B.W. Williams, "A new method of rotor resistance estimation for vector-controlled induction machines," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 247-257, Apr.1997. Full Text Link
2. 14. O. Vainio, S.J. Ovaska, "Multistage adaptive filters for in-phase processing of line-frequency signals," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 258-264, Apr.1997. Full Text Link
2. 15. Jong-Hyun Kim, Bong-Hwan Kwon, "Unity power factor ZVS AC-to-DC converters with an active filter ," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 265-267, Apr.1997. Full Text Link
2. 16. E. Faldella, B. Fringuelli, D. Passeri, L. Rosi, "A neural approach to robotic haptic recognition of 3-D objects based on a Kohonen self-organizing feature map," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 267-269, Apr.1997. Full Text Link
2. 17. B.K. Bose, N.R. Patel, K. Rajashekara, "A neuro-fuzzy-based on-line efficiency optimization control of a stator flux-oriented direct vector-controlled induction motor drive," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 270-273, Apr.1997. Full Text Link
2. 18. A. Chandrasekaran, K. Vasudevan, P.S. Rao, K.S. Rao, "Discussion on “Simulation of power electronic circuits using sparse matrix techniques” [and reply]," Trans. on Industrial Electronics, vol. 44, no. 2, pp. 273, Apr.1997. Full Text Link
3. 1. Hengchun Mao, C.Y. Lee, D. Boroyevich, S. Hiti, "Review of high-performance three-phase power-factor correction circuits," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 437-446, Jun.1997. Full Text Link
3. 2. T. Shimizu, T. Fujita, G. Kimura, J. Hirose, "A unity power factor PWM rectifier with DC ripple compensation," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 447-455, Jun.1997. Full Text Link
3. 3. J.W. Kolar, F.C. Zach, "A novel three-phase utility interface minimizing line current harmonics of high-power telecommunications rectifier modules," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 456-467, Jun.1997. Full Text Link
3. 4. K.S. Smith, Li Ran, J. Penman, "Real-time detection of intermittent misfiring in a voltage-fed PWM inverter induction-motor drive," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 468-476, Jun.1997. Full Text Link
3. 5. M.A. Rahman, T.S. Radwan, A.M. Osheiba, A.E. Lashine, "Analysis of current controllers for voltage-source inverter," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 477-485, Jun.1997. Full Text Link
3. 6. S. Ben-Yaakov, M. Gulko, "Design and performance of an electronic ballast for high-pressure sodium (HPS) lamps," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 486-491, Jun.1997. Full Text Link
3. 7. B.K.H. Wong, H.S.H. Chung, "A general-oriented simulation technique for power electronic systems using quadratic branch voltage extrapolation," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 492-501, Jun.1997. Full Text Link
3. 8. F. Costa, E. Laboure, F. Forest, C. Gautier, "Wide bandwidth, large AC current probe for power electronics and EMI measurements," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 502-511, Jun.1997. Full Text Link
3. 9. Sang-Hoon Kim, Seung-Ki Sul, "Voltage control strategy for maximum torque operation of an induction machine in the field-weakening region," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 512-518, Jun.1997. Full Text Link
3. 10. X.Q. Wu, A. Steimel, "Direct self control of induction machines fed by a double three-level inverter," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 519-527, Jun.1997. Full Text Link
3. 11. M. Marchesoni, P. Segarich, E. Soressi, "A simple approach to flux and speed observation in induction motor drives," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 528-535, Jun.1997. Full Text Link
3. 12. L.A. de Souza Ribeiro, C.B. Jacobina, A.M. Nogueira Lima, A. Cunha Oliveira, "Parameter sensitivity of MRAC models employed in IFO-controlled AC motor drive," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 536-545, Jun.1997. Full Text Link
3. 13. A. Fujino, T. Tobita, K. Segawa, K. Yoneda, A. Togawa, "An elevator group control system with floor-attribute control method and system optimization using genetic algorithms," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 546-552, Jun.1997. Full Text Link
3. 14. G. Cena, A. Valenzano, "An improved CAN fieldbus for industrial applications," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 553-564, Jun.1997. Full Text Link
3. 15. O. Vainio, S.J. Ovaska, "A class of predictive analog filters for sensor signal processing and control instrumentation," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 565-570, Jun.1997. Full Text Link
3. 16. H. Naruse, A. Nobiki, T. Yabuta, M. Tateda, "High-accuracy multiviewpoint stereo measurement using the maximum-likelihood method," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 571-578, Jun.1997. Full Text Link
3. 17. M. Berrada, S. Tarasiewicz, M.E. Elkadiri, P.H. Radziszewski, "A state model for the drying paper in the paper product industry ," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 579-586, Jun.1997. Full Text Link
3. 18. B.K. Bose, N.R. Patel, K. Rajashekara, "A start-up method for a speed sensorless stator-flux-oriented vector-controlled induction motor drive," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 587-590, Jun.1997. Full Text Link
3. 19. Dong-Choon Lee, G-Myoung Lee, "Linear control of inverter output voltage in overmodulation," Trans. on Industrial Electronics, vol. 44, no. 3, pp. 590-592, Jun.1997. Full Text Link
4. 1. Hengchun Mao, C.Y. Lee, D. Boroyevich, S. Hiti, "Review of high-performance three-phase power-factor correction circuits," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 437-446, Aug.1997. Full Text Link
4. 2. T. Shimizu, T. Fujita, G. Kimura, J. Hirose, "A unity power factor PWM rectifier with DC ripple compensation," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 447-455, Aug.1997. Full Text Link
4. 3. J.W. Kolar, F.C. Zach, "A novel three-phase utility interface minimizing line current harmonics of high-power telecommunications rectifier modules," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 456-467, Aug.1997. Full Text Link
4. 4. K.S. Smith, Li Ran, J. Penman, "Real-time detection of intermittent misfiring in a voltage-fed PWM inverter induction-motor drive," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 468-476, Aug.1997. Full Text Link
4. 5. M.A. Rahman, T.S. Radwan, A.M. Osheiba, A.E. Lashine, "Analysis of current controllers for voltage-source inverter," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 477-485, Aug.1997. Full Text Link
4. 6. S. Ben-Yaakov, M. Gulko, "Design and performance of an electronic ballast for high-pressure sodium (HPS) lamps," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 486-491, Aug.1997. Full Text Link
4. 7. B.K.H. Wong, H.S.H. Chung, "A general-oriented simulation technique for power electronic systems using quadratic branch voltage extrapolation," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 492-501, Aug.1997. Full Text Link
4. 8. F. Costa, E. Laboure, F. Forest, C. Gautier, "Wide bandwidth, large AC current probe for power electronics and EMI measurements," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 502-511, Aug.1997. Full Text Link
4. 9. Sang-Hoon Kim, Seung-Ki Sul, "Voltage control strategy for maximum torque operation of an induction machine in the field-weakening region," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 512-518, Aug.1997. Full Text Link
4. 10. X.Q. Wu, A. Steimel, "Direct self control of induction machines fed by a double three-level inverter," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 519-527, Aug.1997. Full Text Link
4. 11. M. Marchesoni, P. Segarich, E. Soressi, "A simple approach to flux and speed observation in induction motor drives," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 528-535, Aug.1997. Full Text Link
4. 12. L.A. de Souza Ribeiro, C.B. Jacobina, A.M. Nogueira Lima, A. Cunha Oliveira, "Parameter sensitivity of MRAC models employed in IFO-controlled AC motor drive," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 536-545, Aug.1997. Full Text Link
4. 13. A. Fujino, T. Tobita, K. Segawa, K. Yoneda, A. Togawa, "An elevator group control system with floor-attribute control method and system optimization using genetic algorithms," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 546-552, Aug.1997. Full Text Link
4. 14. G. Cena, A. Valenzano, "An improved CAN fieldbus for industrial applications," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 553-564, Aug.1997. Full Text Link
4. 15. O. Vainio, S.J. Ovaska, "A class of predictive analog filters for sensor signal processing and control instrumentation," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 565-570, Aug.1997. Full Text Link
4. 16. H. Naruse, A. Nobiki, T. Yabuta, M. Tateda, "High-accuracy multiviewpoint stereo measurement using the maximum-likelihood method," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 571-578, Aug.1997. Full Text Link
4. 17. M. Berrada, S. Tarasiewicz, M.E. Elkadiri, P.H. Radziszewski, "A state model for the drying paper in the paper product industry ," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 579-586, Aug.1997. Full Text Link
4. 18. B.K. Bose, N.R. Patel, K. Rajashekara, "A start-up method for a speed sensorless stator-flux-oriented vector-controlled induction motor drive," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 587-590, Aug.1997. Full Text Link
4. 19. Dong-Choon Lee, G-Myoung Lee, "Linear control of inverter output voltage in overmodulation," Trans. on Industrial Electronics, vol. 44, no. 4, pp. 590-592, Aug.1997. Full Text Link
5. 1. C. Aguilar, F. Canales, J. Arau, J. Sebastian, J. Uceda, "An integrated battery charger/discharger with power-factor correction," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 597-603, Oct.1997. Full Text Link
5. 2. W. Mielczarski, W.B. Lawrance, R. Nowacki, D.G. Holmes, "Harmonic current reduction in three-phase bridge-rectifier circuits using controlled current injection," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 604-611, Oct.1997. Full Text Link
5. 3. J.W. Dixon, G. Venegas, L.A. Moran, "A series active power filter based on a sinusoidal current-controlled voltage-source inverter," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 612-620, Oct.1997. Full Text Link
5. 4. L.A. Moran, L. Fernandez, J.W. Dixon, R. Wallace, "A simple and low-cost control strategy for active power filters connected in cascade," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 621-629, Oct.1997. Full Text Link
5. 5. D.S.L. Simonetti, J. Sebastian, J. Uceda, "The discontinuous conduction mode Sepic and Cuk power factor preregulators: analysis and design," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 630-637, Oct.1997. Full Text Link
5. 6. Tsai-Fu Wu, Te-Hung Yu, "Off-line applications with single-stage converters," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 638-647, Oct.1997. Full Text Link
5. 7. Bo-Tao Lin, Yim-Shu Lee, "Power-factor correction using Cuk converters in discontinuous-capacitor-voltage mode operation," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 648-653, Oct.1997. Full Text Link
5. 8. S. Wall, R. Jackson, "Fast controller design for single-phase power-factor correction systems," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 654-660, Oct.1997. Full Text Link
5. 9. T. Gupta, R.R. Boudreaux, R.M. Nelms, J.Y. Hung, "Implementation of a fuzzy controller for DC-DC converters using an inexpensive 8-b microcontroller," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 661-669, Oct.1997. Full Text Link
5. 10. S.R. Bowes, Yen-Shin Lai, "The relationship between space-vector modulation and regular-sampled PWM," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 670-679, Oct.1997. Full Text Link
5. 11. D. Grenier, L.-A. Dessaint, O. Akhrif, Y. Bonnassieux, B. Le Pioufle, "Experimental nonlinear torque control of a permanent-magnet synchronous motor using saliency," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 680-687, Oct.1997. Full Text Link
5. 12. L.U. Gokdere, M.A. Simaan, "A passivity-based method for induction motor control," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 688-695, Oct.1997. Full Text Link
5. 13. T. Sugimoto, T. Kawaguchi, "Development of an automatic Vickers hardness testing system using image processing technology," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 696-702, Oct.1997. Full Text Link
5. 14. K. Kawasue, T. Ishimatsu, "3-D measurement of moving particles by circular image shifting," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 703-706, Oct.1997. Full Text Link
5. 15. T.W.S. Chow, Gon Fei, Siu-Yeung Cho, "Higher order cumulants-based least squares for nonminimum-phase systems identification," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 707-716, Oct.1997. Full Text Link
5. 16. A. Besharati Rad, Wai Lun Lo, K.M. Tsang, "Self-tuning PID controller using Newton-Raphson search method," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 717-725, Oct.1997. Full Text Link
5. 17. Ning Zhang, Chwan-Hwa Wu, "Study on adaptive job assignment for multiprocessor implementation of MPEG2 video encoding," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 726-734, Oct.1997. Full Text Link
5. 18. Yoon-Ho Lim, Yoon-Sang Kook, Yo Ko, "A new technique of reducing torque ripples for BDCM drives," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 735-739, Oct.1997. Full Text Link
5. 19. Jia-Yush Yen, So-Zen Tsai, "A trajectory feedback control for the computer disk file track-accessing/following servo," Trans. on Industrial Electronics, vol. 44, no. 5, pp. 739-741, Oct.1997. Full Text Link
6. 1. Shuzhi S. Ge, C.C. Hang, L.C. Woon, "Adaptive neural network control of robot manipulators in task space ," Trans. on Industrial Electronics, vol. 44, no. 6, pp. 746-752, Dec.1997. Full Text Link
6. 2. K. Kiguchi, T. Fukuda, "Intelligent position/force controller for industrial robot manipulators-application of fuzzy neural networks," Trans. on Industrial Electronics, vol. 44, no. 6, pp. 753-761, Dec.1997. Full Text Link
6. 3. Meng Joo Er, Kang Chew Liew, "Control of Adept One SCARA robot using neural networks," Trans. on Industrial Electronics, vol. 44, no. 6, pp. 762-768, Dec.1997. Full Text Link
6. 4. J.H.R. Enslin, M.S. Wolf, D.B. Snyman, W. Swiegers, "Integrated photovoltaic maximum power point tracking converter," Trans. on Industrial Electronics, vol. 44, no. 6, pp. 769-773, Dec.1997. Full Text Link
6. 5. J.M. Barnard, J.A. Ferreira, J.D. van Wyk, "Sliding transformers for linear contactless power delivery," Trans. on Industrial Electronics, vol. 44, no. 6, pp. 774-779, Dec.1997. Full Text Link
6. 6. M.P.N. van Wesenbeeck, J.B. Klaasens, U. von Stockhausen, A. Munoz de Morales Anciola, S.S. Valtchev, "A multiple-switch high-voltage DC-DC converter," Trans. on Industrial Electronics, vol. 44, no. 6, pp. 780-787, Dec.1997. Full Text Link
6. 7. Wai Keung Mo, D.K.W. Cheng, Y.S. Lee, "Simple approximations of the DC flux influence on the core loss power electronic ferrites and their use in design of magnetic components ," Trans. on Industrial Electronics, vol. 44, no. 6, pp. 788-799, Dec.1997. Full Text Link
6. 8. Tzu-Shien Chuang, C. Pollock, "Robust speed control of a switched reluctance vector drive using variable structure approach," Trans. on Industrial Electronics, vol. 44, no. 6, pp. 800-808, Dec.1997. Full Text Link
6. 9. Jae Ho Chang, Byung Kook Kim, "Minimum-time minimum-loss speed control of induction motors under field-oriented control," Trans. on Industrial Electronics, vol. 44, no. 6, pp. 809-815, Dec.1997. Full Text Link
6. 10. R.A. Boie, W. Turin, "Noise-limited reading of bar codes," Trans. on Industrial Electronics, vol. 44, no. 6, pp. 816-824, Dec.1997. Full Text Link
6. 11. V.D. Kapsalis, S.A. Koubias, G.D. Papadopoulps, "Implementation of a MAC-layer protocol (GIT-CSMA/CD) for industrial LAN's and its experimental performance," Trans. on Industrial Electronics, vol. 44, no. 6, pp. 825-839, Dec.1997. Full Text Link
6. 12. Zheng Luo, Chwan-Hwa Wu, "A unit decomposition technique using fuzzy logic for real-time handwritten Chinese character recognition," Trans. on Industrial Electronics, vol. 44, no. 6, pp. 840-847, Dec.1997. Full Text Link
6. 13. A. de la Escalera, L.E. Moreno, M.A. Salichs, J.M. Armingol, "Road traffic sign detection and classification," Trans. on Industrial Electronics, vol. 44, no. 6, pp. 848-859, Dec.1997. Full Text Link
6. 14. K. Vasudevan, P.S. Rao, K.S. Rao, "Correction To Authors'-Reply To "discussion On "simulation Of Power Electronic Circuits Using Sparse Matrix Techniques"," Trans. on Industrial Electronics, vol. 44, no. 6, pp. 860-860, Dec.1997. Full Text Link
IEEE Transactions on Industrial Electronics
