1. 1. Byungcho Choi, "Comparative study on paralleling schemes of converter modules for distributed power applications," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 194-199, Feb.1998. Full Text Link
1. 2. A. Toba, T. Shimizu, G. Kimura, M. Shioya, S. Sano, "Auxiliary resonant commutated pole inverter using two internal voltage-points of DC source," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 200-206, Feb.1998. Full Text Link
1. 3. S.A. Chickamenahalli, J.J. Cathey, "A resonant-commutated-link variable-frequency converter," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 207-216, Feb.1998. Full Text Link
1. 4. Byoung-Kuk Lee, Bum-Seok Suh, Dong-Seok Hyun, "Design consideration for the improved Class-D inverter topology," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 217-227, Feb.1998. Full Text Link
1. 5. Jian Liu, Zhiming Chen, Zhong Du, "A new design of power supplies for pocket computer systems," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 228-235, Feb.1998. Full Text Link
1. 6. Min-Chin Lee, Jan-Bin Lio, Dan Y. Chen, Yie-Tone Chen, Yan-Pei Wu, "Small-signal modeling of multiple-output flyback converters in continuous conduction mode with weighted feedback," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 236-248, Feb.1998. Full Text Link
1. 7. Mu-Shen Lin, Wen-Jung Ho, Fu-Yuan Shih, Dan Y. Chen, Yan-Pei Wu, "A cold-cathode fluorescent lamp driver circuit with synchronous primary-side dimming control," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 249-255, Feb.1998. Full Text Link
1. 8. Rong-Jie Tu, Chern-Lin Chen, "A new space-vector-modulated control for a unidirectional three-phase switch-mode rectifier," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 256-262, Feb.1998. Full Text Link
1. 9. P. Verdelho, G.D. Marques, "DC voltage control and stability analysis of PWM-voltage-type reversible rectifiers," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 263-273, Feb.1998. Full Text Link
1. 10. M. Tomita, T. Senjyu, S. Doki, S. Okuma, "New sensorless control for brushless DC motors using disturbance observers and adaptive velocity estimations," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 274-282, Feb.1998. Full Text Link
1. 11. Kichul Hong, Kwanghee Nam, "A load torque compensation scheme under the speed measurement delay ," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 283-290, Feb.1998. Full Text Link
1. 12. P. Koronki, H. Hashimoto, V. Utkin, "Direct torsion control of flexible shaft in an observer-based discrete-time sliding mode," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 291-296, Feb.1998. Full Text Link
1. 13. Chaio-Shiung Chen, Wen-Liang Chen, "Robust adaptive sliding-mode control using fuzzy modeling for an inverted-pendulum system," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 297-306, Feb.1998. Full Text Link
1. 14. L.B. Gutierrez, F.L. Lewis, J.A. Lowe, "Implementation of a neural network tracking controller for a single flexible link: comparison with PD and PID controllers," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 307-318, Feb.1998. Full Text Link
1. 15. Pan-Mook Lee, Jun-Ho Oh, "Improvements on VSS-type self-tuning control for a tracking controller," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 319-325, Feb.1998. Full Text Link
1. 16. M. Vijay, C.S.R. Murthy, "Real-time simulation of dynamic systems on systolic arrays," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 326-332, Feb.1998. Full Text Link
1. 17. K. Tanaka, T. Ikeda, "Absolute stability conditions in a fuzzy phase-lead compensation and their extension to MIMO systems," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 333-340, Feb.1998. Full Text Link
1. 18. A.M. Sabatini, A. Rocchi, "Sampled baseband correlators for in-air ultrasonic rangefinders," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 341-350, Feb.1998. Full Text Link
1. 19. Wen-Chiang Huang, Chwan-Hwa Wu, "Adaptive color image processing and recognition for varying backgrounds and illumination conditions," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 351-357, Feb.1998. Full Text Link
1. 20. Song-Yi Lin, Chern-Lin Chen, "Analysis and design for RCD clamped snubber used in output rectifier of phase-shift full-bridge ZVS converters," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 358-359, Feb.1998. Full Text Link
1. 21. Che-Ming Lee, Chern-Lin Chen, "Speed sensorless vector control of induction motor using Kalman-filter-assisted adaptive observer," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 359-361, Feb.1998. Full Text Link
1. 22. C.S. Ng, T.S. Yeo, "Effects of interline coupling on bit error rate for high-speed digital signal propagation on PCB," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 362-364, Feb.1998. Full Text Link
1. 23. S. Valiviita, S.J. Ovaska, "Delayless acceleration measurement method for elevator control," Trans. on Industrial Electronics, vol. 45, no. 1, pp. 364-366, Feb.1998. Full Text Link
2. 1. Byungcho Choi, "Comparative study on paralleling schemes of converter modules for distributed power applications," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 194-199, Apr.1998. Full Text Link
2. 2. A. Toba, T. Shimizu, G. Kimura, M. Shioya, S. Sano, "Auxiliary resonant commutated pole inverter using two internal voltage-points of DC source," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 200-206, Apr.1998. Full Text Link
2. 3. S.A. Chickamenahalli, J.J. Cathey, "A resonant-commutated-link variable-frequency converter," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 207-216, Apr.1998. Full Text Link
2. 4. Byoung-Kuk Lee, Bum-Seok Suh, Dong-Seok Hyun, "Design consideration for the improved Class-D inverter topology," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 217-227, Apr.1998. Full Text Link
2. 5. Jian Liu, Zhiming Chen, Zhong Du, "A new design of power supplies for pocket computer systems," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 228-235, Apr.1998. Full Text Link
2. 6. Min-Chin Lee, Jan-Bin Lio, Dan Y. Chen, Yie-Tone Chen, Yan-Pei Wu, "Small-signal modeling of multiple-output flyback converters in continuous conduction mode with weighted feedback," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 236-248, Apr.1998. Full Text Link
2. 7. Mu-Shen Lin, Wen-Jung Ho, Fu-Yuan Shih, Dan Y. Chen, Yan-Pei Wu, "A cold-cathode fluorescent lamp driver circuit with synchronous primary-side dimming control," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 249-255, Apr.1998. Full Text Link
2. 8. Rong-Jie Tu, Chern-Lin Chen, "A new space-vector-modulated control for a unidirectional three-phase switch-mode rectifier," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 256-262, Apr.1998. Full Text Link
2. 9. P. Verdelho, G.D. Marques, "DC voltage control and stability analysis of PWM-voltage-type reversible rectifiers," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 263-273, Apr.1998. Full Text Link
2. 10. M. Tomita, T. Senjyu, S. Doki, S. Okuma, "New sensorless control for brushless DC motors using disturbance observers and adaptive velocity estimations," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 274-282, Apr.1998. Full Text Link
2. 11. Kichul Hong, Kwanghee Nam, "A load torque compensation scheme under the speed measurement delay ," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 283-290, Apr.1998. Full Text Link
2. 12. P. Koronki, H. Hashimoto, V. Utkin, "Direct torsion control of flexible shaft in an observer-based discrete-time sliding mode," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 291-296, Apr.1998. Full Text Link
2. 13. Chaio-Shiung Chen, Wen-Liang Chen, "Robust adaptive sliding-mode control using fuzzy modeling for an inverted-pendulum system," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 297-306, Apr.1998. Full Text Link
2. 14. L.B. Gutierrez, F.L. Lewis, J.A. Lowe, "Implementation of a neural network tracking controller for a single flexible link: comparison with PD and PID controllers," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 307-318, Apr.1998. Full Text Link
2. 15. Pan-Mook Lee, Jun-Ho Oh, "Improvements on VSS-type self-tuning control for a tracking controller," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 319-325, Apr.1998. Full Text Link
2. 16. M. Vijay, C.S.R. Murthy, "Real-time simulation of dynamic systems on systolic arrays," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 326-332, Apr.1998. Full Text Link
2. 17. K. Tanaka, T. Ikeda, "Absolute stability conditions in a fuzzy phase-lead compensation and their extension to MIMO systems," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 333-340, Apr.1998. Full Text Link
2. 18. A.M. Sabatini, A. Rocchi, "Sampled baseband correlators for in-air ultrasonic rangefinders," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 341-350, Apr.1998. Full Text Link
2. 19. Wen-Chiang Huang, Chwan-Hwa Wu, "Adaptive color image processing and recognition for varying backgrounds and illumination conditions," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 351-357, Apr.1998. Full Text Link
2. 20. Song-Yi Lin, Chern-Lin Chen, "Analysis and design for RCD clamped snubber used in output rectifier of phase-shift full-bridge ZVS converters," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 358-359, Apr.1998. Full Text Link
2. 21. Che-Ming Lee, Chern-Lin Chen, "Speed sensorless vector control of induction motor using Kalman-filter-assisted adaptive observer," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 359-361, Apr.1998. Full Text Link
2. 22. C.S. Ng, T.S. Yeo, "Effects of interline coupling on bit error rate for high-speed digital signal propagation on PCB," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 362-364, Apr.1998. Full Text Link
2. 23. S. Valiviita, S.J. Ovaska, "Delayless acceleration measurement method for elevator control," Trans. on Industrial Electronics, vol. 45, no. 2, pp. 364-366, Apr.1998. Full Text Link
3. 1. J.W. Kolar, H. Ertl, F.C. Zach, "How to include the dependency of the R/sub DS(on/) of power MOSFETs on the instantaneous value of the drain current into the calculation of the conduction losses of high-frequency three-phase PWM inverters," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 369-375, Jun.1998. Full Text Link
3. 2. Soon Yong Yang, Min Cheol Lee, Man Hyung Lee, S. Arimoto, "Measuring system for development of stroke-sensing cylinder for automatic excavator," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 376-384, Jun.1998. Full Text Link
3. 3. S.J. Chiang, K.T. Chang, C.Y. Yen, "Residential photovoltaic energy storage system," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 385-394, Jun.1998. Full Text Link
3. 4. Jung-Goo Cho, Ju-Won Baek, Dong-Wook Yoo, Hong-Sik Lee, "Reduced conduction loss zero-voltage-transition power factor correction converter with low cost," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 395-400, Jun.1998. Full Text Link
3. 5. D. Casadei, G. Serra, A. Tani, "Reduction of the input current harmonic content in matrix converters under input/output unbalance," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 401-411, Jun.1998. Full Text Link
3. 6. K. Shinoda, T. Suetsugu, M. Matsuo, S. Mori, "Analysis of phase-controlled resonant DC-AC inverters with class E amplifier and frequency multipliers," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 412-420, Jun.1998. Full Text Link
3. 7. B.K.H. Wong, Henry Shu-Hung Chung, "Steady-state analysis of PWM DC/DC switching regulators using iterative cycle time-domain simulation," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 421-432, Jun.1998. Full Text Link
3. 8. S.A. Bortoff, R.R. Kohan, R. Milman, "Adaptive control of variable reluctance motors: a spline function approach," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 433-444, Jun.1998. Full Text Link
3. 9. Hwi-Beon Shin, "New antiwindup PI controller for variable-speed motor drives," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 445-450, Jun.1998. Full Text Link
3. 10. Seul Jung, T.C. Hsia, "Neural network impedance force control of robot manipulator," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 451-461, Jun.1998. Full Text Link
3. 11. V. Ramachandran, "Evaluation of performance criteria of CNC machine tool drive system ," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 462-468, Jun.1998. Full Text Link
3. 12. Fan-Tien Cheng, Jeng-Shi Chen, Fan-Chu Kung, "Study and resolution of singularities for a 7-DOF redundant manipulator," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 469-480, Jun.1998. Full Text Link
3. 13. Kit-Sang Tang, Kim-Fung Man, Sam Kwong, Zhi-Feng Liu, "Design and optimization of IIR filter structure using hierarchical genetic algorithms," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 481-487, Jun.1998. Full Text Link
3. 14. T. Mita, M. Hirata, K. Murata, H. Zhang, "H∞ control versus disturbance-observer-based control," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 488-495, Jun.1998. Full Text Link
3. 15. Guang Geng, G.M. Geary, "The control of input-constrained nonlinear processes using numerical generalized predictive control methods," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 496-501, Jun.1998. Full Text Link
3. 16. L.K. Wong, F.H.F. Leung, P.K.S. Tam, "Lyapunov-function-based design of fuzzy logic controllers and its application on combining controllers," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 502-509, Jun.1998. Full Text Link
3. 17. K. Kobayashi, K.C. Cheok, K. Watanabe, F. Munekata, "Accurate differential global positioning system via fuzzy logic Kalman filter sensor fusion technique," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 510-518, Jun.1998. Full Text Link
3. 18. S. Ben-Yaakov, I. Zehser, "PWM converters with resistive input," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 519-520, Jun.1998. Full Text Link
3. 19. E.A. Vendrusculo, J.A. Pomilio, "Soft commutation in capacitive idling converters," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 521-522, Jun.1998. Full Text Link
3. 20. Jong-Woo Choi, Seung-Ki Sol, "Design of fast-response current controller using d-q axis cross coupling: application to permanent magnet synchronous motor drive," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 522-524, Jun.1998. Full Text Link
3. 21. Tsai-Fu Wu, Te-Hung Yu, Yong-Jing Wu, "A microprocessor-based toggle-control lighting system," Trans. on Industrial Electronics, vol. 45, no. 3, pp. 525-528, Jun.1998. Full Text Link
4. 1. Ching-Tsai Pan, Jenn-Jong Shieh, "A family of closed-form duty cycle control laws for three-phase boost AC/DC converter," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 530-543, Aug.1998. Full Text Link
4. 2. E. Dallago, G. Sasone, M. Storti, G. Venchi, "Experimental analysis and comparison on a power factor controller including a delta-sigma processing stage," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 544-551, Aug.1998. Full Text Link
4. 3. Gun-Woo Moon, Chung-Wook Roh, Jun-Young Lee, Myung-Joon Choo, "Magnetic-coupled high power factor converter with low line current harmonic distortions for power factor correction and fast output response," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 552-558, Aug.1998. Full Text Link
4. 4. S. Valiviita, S.J. Ovaska, "Delayless method to generate current reference for active filters ," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 559-567, Aug.1998. Full Text Link
4. 5. J. Leyva-Ramos, J.A. Morales-Saldana, "A design criteria for the current gain in current-programmed regulators," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 568-573, Aug.1998. Full Text Link
4. 6. S. Senini, P.J. Wolfs, "The coupled inductor filter: analysis and design for AC systems," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 574-578, Aug.1998. Full Text Link
4. 7. Kuen-Der Wu, Hurng-Liahng Jou, "A new peak detection method for the three-phase sinusoidal signals ," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 579-584, Aug.1998. Full Text Link
4. 8. J.A. Ferreira, J.A. Roux, "A series resonant converter for arc-striking applications," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 585-592, Aug.1998. Full Text Link
4. 9. Ching-Jung Tseng, Chern-Lin Chen, "A passive lossless snubber cell for nonisolated PWM DC/DC converters," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 593-601, Aug.1998. Full Text Link
4. 10. Zaohong Yang, P.C. Sen, "A novel switch-mode DC-to-AC inverter with nonlinear robust control ," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 602-608, Aug.1998. Full Text Link
4. 11. Yie-Tone Chen, Fu-Yuan Shih, "New multi-output switching converters with MOSFET-rectifier post regulators," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 609-616, Aug.1998. Full Text Link
4. 12. Jinhwan Jung, Kwanghee Nam, "A vector control scheme for EV induction motors with a series iron loss model," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 617-624, Aug.1998. Full Text Link
4. 13. Hyeoun-Dong Lee, Seung-Ki Sul, "Fuzzy-logic-based torque control strategy for parallel-type hybrid electric vehicle," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 625-632, Aug.1998. Full Text Link
4. 14. A. Bartoszewicz, "Discrete-time quasi-sliding-mode control strategies," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 633-637, Aug.1998. Full Text Link
4. 15. Moon-Noh Lee, Jung-Ho Moon, Kyoung Bog Jin, Myung Jin Chung, "Robust H∞ control with multiple constraints for the track-following system of an optical disk drive," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 638-645, Aug.1998. Full Text Link
4. 16. Shih-Tin Lin, Ang-Kiong Huang, "Hierarchical fuzzy force control for industrial robots," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 646-653, Aug.1998. Full Text Link
4. 17. R. Gutierrez-Osuna, J.A. Janet, R.C. Luo, "Modeling of ultrasonic range sensors for localization of autonomous mobile robots," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 654-662, Aug.1998. Full Text Link
4. 18. T.W.S. Chow, Hong-Zhou Tan, "Semiblind identification of nonminimum-phase ARMA models via order recursion with higher order cumulants," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 663-671, Aug.1998. Full Text Link
4. 19. K.S. Low, "A digital control technique for a single-phase PWM inverter," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 672-674, Aug.1998. Full Text Link
4. 20. Ching-Jung Tseng, Chern-Lin Chen, "On the ZVT-PWM Cuk converter," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 674-677, Aug.1998. Full Text Link
4. 21. Song-Yi Lin, Chern-Lin Chen, "On the leading leg transition of phase-shifted ZVS-FB converters ," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 677-679, Aug.1998. Full Text Link
4. 22. H. Chung, S.Y.R. Hui, W.H. Wang, "An isolated ZVS/ZCS flyback converter using the leakage inductance of the coupled inductor," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 679-682, Aug.1998. Full Text Link
4. 23. Doo-Hee Jung, In-Joong Ha, "An efficient method for identifying the initial position of a PMSM with an incremental encoder," Trans. on Industrial Electronics, vol. 45, no. 4, pp. 682-685, Aug.1998. Full Text Link
5. 1. M.P. Kazmierkowski, L. Malesani, "Current control techniques for three-phase voltage-source PWM converters: a survey," Trans. on Industrial Electronics, vol. 45, no. 5, pp. 691-703, Oct.1998. Full Text Link
5. 2. C.B. Jacobina, A.M.N. Lima, E.R.C. da Silva, A.M. Trzynadlowski, "Current control for induction motor drives using random PWM," Trans. on Industrial Electronics, vol. 45, no. 5, pp. 704-712, Oct.1998. Full Text Link
5. 3. L. Springob, J. Holtz, "High-bandwidth current control for torque-ripple compensation in PM synchronous machines," Trans. on Industrial Electronics, vol. 45, no. 5, pp. 713-721, Oct.1998. Full Text Link
5. 4. S. Buso, L. Malesani, P. Mattavelli, "Comparison of current control techniques for active filter applications," Trans. on Industrial Electronics, vol. 45, no. 5, pp. 722-729, Oct.1998. Full Text Link
5. 5. Yi-Hwa Liu, Chern-Lin Chen, Rong-Jie Tu, "A novel space-vector current regulation scheme for a field-oriented-controlled induction motor drive," Trans. on Industrial Electronics, vol. 45, no. 5, pp. 730-737, Oct.1998. Full Text Link
5. 6. Jong-Woo Choi, Seung-Ki Sul, "Generalized solution of minimum time current control in three-phase balanced systems," Trans. on Industrial Electronics, vol. 45, no. 5, pp. 738-744, Oct.1998. Full Text Link
5. 7. A.M. Khambadkone, J. Holtz, "Fast current control for low harmonic distortion at low switching frequency," Trans. on Industrial Electronics, vol. 45, no. 5, pp. 745-751, Oct.1998. Full Text Link
5. 8. Bong-Hwan Kwon, Byung-Duk Min, Jang-Hyoun Youm, "An improved space-vector-based hysteresis current controller," Trans. on Industrial Electronics, vol. 45, no. 5, pp. 752-760, Oct.1998. Full Text Link
5. 9. P. Verdelho, G.D. Marques, "Four-wire current-regulated PWM voltage converter," Trans. on Industrial Electronics, vol. 45, no. 5, pp. 761-770, Oct.1998. Full Text Link
5. 10. A. Tilli, A. Tonielli, "Sequential design of hysteresis current controller for three-phase inverter," Trans. on Industrial Electronics, vol. 45, no. 5, pp. 771-781, Oct.1998. Full Text Link
5. 11. Ying-Yu Tzou, Shiu-Yung Lin, "Fuzzy-tuning current-vector control of a three-phase PWM inverter for high-performance AC drives," Trans. on Industrial Electronics, vol. 45, no. 5, pp. 782-791, Oct.1998. Full Text Link
5. 12. A. Sikorski, T. Citko, "Current controller reduced switching frequency for VS-PWM inverter used with AC motor drive applications," Trans. on Industrial Electronics, vol. 45, no. 5, pp. 792-801, Oct.1998. Full Text Link
5. 13. J.F.A. Martins, A.J. Pires, J.F. Silva, "A novel and simple current controller for three-phase PWM power inverters," Trans. on Industrial Electronics, vol. 45, no. 5, pp. 802-804, Oct.1998. Full Text Link
5. 14. R. Watson, F.C. Lee, "Analysis, design, and experimental results of a 1-kW ZVS-FB-PWM converter employing magamp secondary-side control," Trans. on Industrial Electronics, vol. 45, no. 5, pp. 806-814, Oct.1998. Full Text Link
5. 15. Y.G. Dessouky, B.W. Williams, J.E. Fletcher, "A novel power converter with voltage-boosting capacitors for a four-phase SRM drive," Trans. on Industrial Electronics, vol. 45, no. 5, pp. 815-823, Oct.1998. Full Text Link
5. 16. L. Zhen, L. Xu, "Sensorless field orientation control of induction machines based on a mutual MRAS scheme," Trans. on Industrial Electronics, vol. 45, no. 5, pp. 824-831, Oct.1998. Full Text Link
5. 17. Jong-Hyun Kim, Byung-Duk Min, Bong-Hwan Kwon, Sang-Chul Won, "A PWM buck-boost AC chopper solving the commutation problem," Trans. on Industrial Electronics, vol. 45, no. 5, pp. 832-835, Oct.1998. Full Text Link
6. 1. T. Riesgo, Y. Torroja, E. de la Torre, "Design methodologies based on hardware description languages," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 3-12, Dec.1998. Full Text Link
6. 2. J.R. Armstrong, F.G. Gray, Meng-Wei Lin, "VHDL modeling and model testing for DSP applications," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 13-22, Dec.1998. Full Text Link
6. 3. D.A.G. Pedder, A.D. Brown, J.A. Skinner, "A contactless electrical energy transmission system," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 23-30, Dec.1998. Full Text Link
6. 4. F.L.M. Antunes, H.A.C. Braga, I. Barbi, "Application of a generalized current multilevel cell to current-source inverters," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 31-38, Dec.1998. Full Text Link
6. 5. S.F. Pinto, J.F.A. Silva, "Constant-frequency sliding-mode and PI linear controllers for power rectifiers: a comparison," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 39-51, Dec.1998. Full Text Link
6. 6. J.E. Vadell, L.E. Chiang, "Stepping motor driving by controlled-energy discharge," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 52-60, Dec.1998. Full Text Link
6. 7. M. Dawande, G.K. Dubey, "Bang-bang current control with predecided switching frequency for switch-mode rectifiers," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 61-66, Dec.1998. Full Text Link
6. 8. G. Ivensky, I. Zeltser, A. Kats, S. Ben-Yaakov, "Reducing IGBT losses in ZCS series resonant converters," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 67-74, Dec.1998. Full Text Link
6. 9. Bo-Tao Lin, Kam-Wah Siu, Yim-Shu Lee, "Actively clamped zero-current-switching quasi-resonant converters using IGBTs," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 75-81, Dec.1998. Full Text Link
6. 10. A. Ferrari de Souza, I. Barbi, "A new ZVS semiresonant high power factor rectifier with reduced conduction losses," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 82-90, Dec.1998. Full Text Link
6. 11. K.K. Tse, H.S. Chung, S.Y.R. Hui, "Stepwise quadratic state-space modeling technique for simulation of power electronics circuits," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 91-99, Dec.1998. Full Text Link
6. 12. Jinhwan Jung, Kwanghee Nam, "A dynamic decoupling control scheme for high-speed operation of induction motors," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 100-110, Dec.1998. Full Text Link
6. 13. Yih-Neng Lin, Chern-Lin Chen, "Automatic IM parameter measurement under sensorless field-oriented control," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 111-118, Dec.1998. Full Text Link
6. 14. C. Cecati, N. Rotondale, "Torque and speed regulation of induction motors using the passivity theory approach," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 119-127, Dec.1998. Full Text Link
6. 15. A. Benchaib, A. Rachid, E. Audrezet, M. Tadjine, "Real-time sliding-mode observer and control of an induction motor ," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 128-138, Dec.1998. Full Text Link
6. 16. S.R. Shaw, S.B. Leeb, "Identification of induction motor parameters from transient stator current measurements," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 139-149, Dec.1998. Full Text Link
6. 17. P. Marino, M. Milano, F. Vasca, "Linear quadratic state feedback and robust neural network estimator for field-oriented-controlled induction motors," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 150-161, Dec.1998. Full Text Link
6. 18. Y. Hori, H. Sawada, Yeonghan Chun, "Slow resonance ratio control for vibration suppression and disturbance rejection in torsional system," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 162-168, Dec.1998. Full Text Link
6. 19. Shiuh-Jer Huang, Chiou-Yuarn Shy, "Fuzzy logic for constant force control of end milling," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 169-176, Dec.1998. Full Text Link
6. 20. A.M. Stankovic, G. Tadmor, Z.J. Coric, I. Agirman, "On torque ripple reduction in current-fed switched reluctance motors," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 177-183, Dec.1998. Full Text Link
6. 21. S. Bolognani, R. Oboe, M. Zigliotto, "Sensorless full-digital PMSM drive with EKF estimation of speed and rotor position," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 184-191, Dec.1998. Full Text Link
6. 22. Hyeoun-Dong Lee, Seog-Joo Kang, Seung-Ki Sul, "Efficiency-optimized direct torque control of synchronous reluctance motor using feedback linearization," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 192-198, Dec.1998. Full Text Link
6. 23. Han Ding, S.K. Tso, "A fully neural-network-based planning scheme for torque minimization of redundant manipulators," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 199-206, Dec.1998. Full Text Link
6. 24. D.L. Hung, Heng-Da Cheng, S. Sengkhamyong, "Design of a hardware accelerator for real-time moment computation: a wavefront away approach," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 207-218, Dec.1998. Full Text Link
6. 25. C. Boukouvalas, J. Kittler, R. Marik, M. Petrou, "Color grading of randomly textured ceramic tiles using color histograms," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 219-226, Dec.1998. Full Text Link
6. 26. Lichuan Li, "Copper loss reduction of a voice-coil motor for cutting tool positioning using an auxiliary rotary motor," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 227-229, Dec.1998. Full Text Link
6. 27. H. Ding, S.K. Tso, "Redundancy resolution of robotic manipulators with neural computation," Trans. on Industrial Electronics, vol. 45, no. 6, pp. 230-233, Dec.1998. Full Text Link
IEEE Transactions on Industrial Electronics
