IEEE Transactions on Industrial Electronics IEEE Transactions on Industrial Electronics

Volume 51, Number 1, Feb 2004 Access to the journal on IEEE XPLORE IE Transactions Home Page

Drive Control

1. 1.     H. Abu-Rub, J. Guzinski, Z. Krzeminski, H.A. Toliyat, "Advanced control of induction motor based on load angle estimation," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 5- 14, Feb 2004.  Full Text Link

1. 2.     Ching-Guo Chen, Tian-Hua Liu, Ming-Tsan Lin, Chih-An Tai, "Position control of a sensorless synchronous reluctance motor," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 15- 25, Feb 2004.  Full Text Link

1. 3.     Z.-J. Yang, K. Miyazaki, S. Kanae, K. Wada, "Robust position control of a magnetic levitation system via dynamic surface control technique," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 26- 34, Feb 2004.  Full Text Link

1. 4.     Ya-Fu Peng, Rong-Jong Wai, Chih-Min Lin, "Implementation of LLCC-resonant driving circuit and adaptive CMAC neural network control for linear piezoelectric ceramic motor," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 35- 48, Feb 2004.  Full Text Link

1. 5.     A. Bunte, S. Beineke, "High-performance speed measurement by suppression of systematic resolver and encoder errors," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 49- 53, Feb 2004.  Full Text Link

Power Electronics

1. 6.     D.B. Costa, C.M.C. Duarte, "The ZVS-PWM active-clamping CUK converter," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 54- 60, Feb 2004.  Full Text Link

1. 7.     Jianguo Liu, P. Pillay, H. Douglas, "Wavelet modeling of motor drives applied to the calculation of motor terminal overvoltages," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 61- 66, Feb 2004.  Full Text Link

1. 8.     S. Tamai, S. Murakami, R. Uchida, H. Akagi, "Control and performance of a self-commutated GTO converter operating in parallel with line-commutated thyristor converters," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 67- 73, Feb 2004.  Full Text Link

1. 9.     D.A. Bennett, R.H. Selfridge, J.N. Harb, D.T. Comer, "A control circuit for a microsensor hybrid power supply," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 74- 80, Feb 2004.  Full Text Link

1. 10.     Xiangning He, Yan Deng, B.W. Williams, S.J. Finney, Zhaoming Qian, "A simple energy recovery circuit for high-power inverters with complete turn-on and turn-off snubbers," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 81- 88, Feb 2004.  Full Text Link

1. 11.     H. Bodur, A.F. Bakan, "An improved ZCT-PWM DC-DC converter for high-power and frequency applications," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 89- 95, Feb 2004.  Full Text Link

1. 12.     A.M. Omar, N.A. Rahim, S. Mekhilef, "Three-phase synchronous PWM for flyback converter with power-factor correction using FPGA ASIC design," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 96- 106, Feb 2004.  Full Text Link

1. 13.     M. Eltabach, A. Charara, I. Zein, "A comparison of external and internal methods of signal spectral analysis for broken rotor bars detection in induction motors," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 107- 121, Feb 2004.  Full Text Link

1. 14.     C. Branas, F.J. Azcondo, S. Bracho, "Study of output power variation due to component tolerances in LC/sub s/C/sub p/ resonant inverters applied to HPS lamp control," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 122- 131, Feb 2004.  Full Text Link

1. 15.     G.-M. Lee, Dong-Choon Lee, Jul-Ki Seok, "Control of series active power filters compensating for source voltage unbalance and current harmonics," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 132- 139, Feb 2004.  Full Text Link

1. 16.     Byungcho Choi, Jaehyun Nho, Honnyong Cha, Taeyoung Ahn, Seungwon Choi, "Design and implementation of low-profile contactless battery charger using planar printed circuit board windings as energy transfer device," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 140- 147, Feb 2004.  Full Text Link

1. 17.     Chwei-Sen Wang, G.A. Covic, O.H. Stielau, "Power transfer capability and bifurcation phenomena of loosely coupled inductive power transfer systems," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 148- 157, Feb 2004.  Full Text Link

1. 18.     L. Helle, K.B. Larsen, A.H. Jorgensen, S. Munk-Nielsen, F. Blaabjerg, "Evaluation of modulation schemes for three-phase to three-phase matrix converters," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 158- 171, Feb 2004.  Full Text Link

Emerging Technology

1. 19. F.H.F. Leung, H.K. Lam, S.H. Ling, P.K.S. Tam, "Optimal and stable fuzzy controllers for nonlinear systems based on an improved genetic algorithm," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 172- 182, Feb 2004. Full Text Link

1. 20. S. Wu, T.W.S. Chow, "Induction machine fault detection using SOM-based RBF neural networks," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 183- 194, Feb 2004. Full Text Link

Robotics And Vision

1. 21.     W.L. Xu, S. Yue, "Pre-posed configuration of flexible redundant robot manipulators for impact vibration alleviating," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 195- 200, Feb 2004.  Full Text Link

1. 22.     Rong-Jong Wai, Meng-Chang Lee, "Intelligent optimal control of single-link flexible robot arm," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 201- 220, Feb 2004.  Full Text Link

1. 23.     S. Katsura, K. Ohnishi, "Human cooperative wheelchair for haptic interaction based on dual compliance control," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 221- 228, Feb 2004.  Full Text Link

1. 24.     K. Morioka, Joo-Ho Lee, H. Hashimoto, "Human-following mobile robot in a distributed intelligent sensor network," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 229- 237, Feb 2004.  Full Text Link

Letters To The Editor
1. 25.     P. Sooraksa, G. Chen, "On comparison of hybrid fuzzy PI plus conventional D controller versus fuzzy PI+D controller," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 238- 239, Feb 2004.  Full Text Link

1. 26.     P.W. Wheeler, J. Clare, L. Empringham, "Enhancement of matrix converter output waveform quality using minimized commutation times," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 240- 244, Feb 2004.  Full Text Link

1. 27.     C.M. Saaj, B. Bandyopadhyay, H. Unbehauen, "A minor correction to "A new algorithm for discrete-time sliding mode control using fast output sampling feedback"," IEEE Trans. on Industrial Electronics, vol. 51, no. 1, pp. 244- 247, Feb 2004.  Full Text Link

Volume 51, Number 2, Apr 2004 Access to the journal on IEEE XPLORE IE Transactions Home Page

Special Section Papers on Automotive Electronic Systems

2. 1.     F. Cuesta, F. Gomez-Bravo, A. Ollero, "Parking maneuvers of industrial-like electrical vehicles with and without trailer," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 257- 269, Apr 2004.  Full Text Link

2. 2.     R. Daily, D.M. Bevly, "The use of GPS for vehicle stability control systems," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 270- 277, Apr 2004.  Full Text Link

2. 3.     J. Stephant, A. Charara, D. Meizel, "Virtual sensor: application to vehicle sideslip angle and transversal forces," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 278- 289, Apr 2004.  Full Text Link

2. 4.     M. Parmar, J.Y. Hung, "A sensorless optimal control system for an automotive electric power assist steering system," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 290- 298, Apr 2004.  Full Text Link

2. 5.     M. Montanari, F. Ronchi, C. Rossi, A. Tonielli, "Control of a camless engine electromechanical actuator: position reconstruction and dynamic performance analysis," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 299- 311, Apr 2004.  Full Text Link

2. 6.     Junha Kim, Jinhwan Jung, Kwanghee Nam, "Dual-inverter control strategy for high-speed operation of EV induction motors," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 312- 320, Apr 2004.  Full Text Link

2. 7.     W.G. Koellner, G.M. Brown, J. Rodriguez, J. Pontt, P. Cortes, H. Miranda, "Recent advances in mining haul trucks," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 321- 329, Apr 2004.  Full Text Link

Drive Control
2. 8.     Ching-Chih Tsai, Chih-Hung Huang, "Model reference adaptive predictive control for a variable-frequency oil-cooling machine," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 330- 339, Apr 2004.  Full Text Link

2. 9.     A.G. Loukianov, J.M. Canedo, V.I. Utkin, J. Cabrera-Vazquez, "Discontinuous controller for power systems: sliding-mode block control approach," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 340- 353, Apr 2004.  Full Text Link

2. 10.     N. Bonnail, D. Tonneau, F. Jandard, G.-A. Capolino, H. Dallaporta, "Variable structure control of a piezoelectric actuator for a scanning tunneling microscope," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 354- 363, Apr 2004.  Full Text Link

2. 11.     A. Damiano, G.L. Gatto, I. Marongiu, A. Pisano, "Second-order sliding-mode control of DC drives," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 364- 373, Apr 2004.  Full Text Link

2. 12.     Jin-Woo Ahn, Sung-Jun Park, Dong-Hee Lee, "Hybrid excitation of SRM for reduction of vibration and acoustic noise," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 374- 380, Apr 2004.  Full Text Link

2. 13.     Chunxiang Wang, Yongzhang Wang, Ruqing Yang, Hua Lu, "Research on precision tension control system based on neural network," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 381- 386, Apr 2004.  Full Text Link

2. 14.     P. Baranyi, "TP model transformation as a way to LMI-based controller design," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 387- 400, Apr 2004.  Full Text Link

2. 15.     G. Escobar, A.M. Stankovic, P. Mattavelli, "An adaptive controller in stationary reference frame for D-statcom in unbalanced operation," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 401- 409, Apr 2004.  Full Text Link

2. 16.     K.K. Tse, B.M.T. Ho, H.S.-H. Chung, S.Y.R. Hui, "A comparative study of maximum-power-point trackers for photovoltaic panels using switching-frequency modulation scheme," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 410- 418, Apr 2004.  Full Text Link

2. 17.     M. Lopez, L.G. de Vicuna, M. Castilla, P. Gaya, O. Lopez, "Current distribution control design for paralleled DC/DC converters using sliding-mode control," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 419- 428, Apr 2004.  Full Text Link

2. 18.     H.Y. Kanaan, H. Fortin-Blanchette, K. Al-Haddad, R. Chaffai, L. Duguay, F. Fnaiech, "Linear control design for a current-injection-based three-phase unity-power-factor rectifier," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 429- 438, Apr 2004.  Full Text Link

2. 19.     R.L. de Araujo Ribeiro, C.B. Jacobina, E.R.C. da Silva, A.M.N. Lima, "Fault-tolerant voltage-fed PWM inverter AC motor drive systems," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 439- 446, Apr 2004.  Full Text Link

2. 20.     M. Malinowski, M. Jasinski, M.P. Kazmierkowski, "Simple direct power control of three-phase PWM rectifier using space-vector modulation (DPC-SVM)," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 447- 454, Apr 2004.  Full Text Link

2. 21.     Chongming Qiao, Taotao Jin, K.M. Smedley, "One-cycle control of three-phase active power filter with vector operation," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 455- 463, Apr 2004.  Full Text Link

2. 22.     K.F. Leung, F.H.F. Leung, H.K. Lam, S.H. Ling, "On interpretation of graffiti digits and characters for eBooks: neural-fuzzy network and genetic algorithm approach," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 464- 471, Apr 2004.  Full Text Link

2. 23.     Chin Tsu Yen, Wan-de Weng, Yen Tsun Lin, "FPGA realization of a neural-network-based nonlinear channel equalizer," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 472- 479, Apr 2004.  Full Text Link

2. 24.     G. Ginesu, D.D. Giusto, V. Margner, P. Meinlschmidt, "Detection of foreign bodies in food by thermal image processing," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 480- 490, Apr 2004.  Full Text Link

2. 25.     D. Bi, Y.F. Li, S.K. Tso, G.L. Wang, "Friction modeling and compensation for haptic display based on support vector machine," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 491- 500, Apr 2004.  Full Text Link

2. 26.     T. Muraoka, H. Ikeda, "Selection of display devices used at man-machine interfaces based on human factors," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 501- 506, Apr 2004.  Full Text Link

2. 27.     Kyu-Wang Lee, Doo-Hee Jung, In-Joong Ha, "An online identification method for both stator resistance and back-EMF coefficient of PMSMs without rotational transducers," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 507- 510, Apr 2004.  Full Text Link

2. 28.     M. Karimi-Ghartemani, H. Karimi, M.R. Iravani, "A magnitude/phase-locked loop system based on estimation of frequency and in-phase/quadrature-phase amplitudes," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 511- 517, Apr 2004.  Full Text Link

2. 29.     Xinbo Ruan, Jiangang Wang, "Calculation of the resonant capacitor of the improved current-doubler-rectifier ZVS PWM full-bridge converter," IEEE Trans. on Industrial Electronics, vol. 51, no. 2, pp. 518- 520, Apr 2004.  Full Text Link

Volume 51, Number 3, Jun 2004 Access to the journal on IEEE XPLORE IE Transactions Home Page

3. 1.     Jian-Xin Xu, S.K. Panda, Ya-Jun Pan, Tong Heng Lee, B.H. Lam, "A modular control scheme for PMSM speed control with pulsating torque minimization," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 526- 536, Jun 2004.  Full Text Link

3. 2.     D. Simon, D.L. Feucht, "Synchronous motor phase control by vector addition of induced winding voltages," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 537- 544, Jun 2004.  Full Text Link

3. 3.     Young Ahn Kwon, Sung Hwan Kim, "A new scheme for speed-sensorless control of induction motor," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 545- 550, Jun 2004.  Full Text Link

3. 4.     Li Ran, Yong Liao, "Sampling-induced resonance in an encoderless vector-controlled induction motor drive," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 551- 557, Jun 2004.  Full Text Link

3. 5.     T.W.S. Chow, Shi Hai, "Induction machine fault diagnostic analysis with wavelet technique," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 558- 565, Jun 2004.  Full Text Link

3. 6.     G. Moschopoulos, P.K. Jain, "A novel single-phase soft-switched rectifier with unity power factor and minimal component count," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 566- 576, Jun 2004.  Full Text Link

3. 7.     Chung-Wook Roh, Seung-Hoon Han, Sung-Soo Hong, Sug-Chin Sakong, Myung-Joong Youn, "Dual-coupled inductor-fed DC/DC converter for battery drive applications," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 577- 584, Jun 2004.  Full Text Link

3. 8.     H. Abu-Rub, J. Guzinski, Z. Krzeminski, H.A. Toliyat, "Predictive current control of voltage-source inverters," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 585- 593, Jun 2004.  Full Text Link

3. 9.     Fang Lin Luo, Hong Ye, "Positive output multiple-lift push-pull switched-capacitor Luo-converters," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 594- 602, Jun 2004.  Full Text Link

3. 10.     R. Cardenas, R. Pena, G.M. Asher, J. Clare, R. Blasco-Gimenez, "Control strategies for power smoothing using a flywheel driven by a sensorless vector-controlled induction machine operating in a wide speed range," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 603- 614, Jun 2004.  Full Text Link

3. 11.     Jun-Young Lee, Jin-Sung Kim, Nam-Sung Jung, Bo-Hyung Cho, "The current injection method for AC plasma display panel (PDP) sustainer," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 615- 624, Jun 2004.  Full Text Link

3. 12.     H. Matsuo, Wenzhong Lin, F. Kurokawa, T. Shigemizu, N. Watanabe, "Characteristics of the multiple-input DC-DC converter," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 625- 631, Jun 2004.  Full Text Link

3. 13.     N.P. Papanikolaou, E.C. Tatakis, "Active voltage clamp in flyback converters operating in CCM mode under wide load variation," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 632- 640, Jun 2004.  Full Text Link

3. 14.     B. Singh, B.N. Singh, A. Chandra, K. Al-Haddad, A. Pandey, D.P. Kothari, "A review of three-phase improved power quality AC-DC converters," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 641- 660, Jun 2004.  Full Text Link

3. 15.     A. Emadi, "Modeling and analysis of multiconverter DC power electronic systems using the generalized state-space averaging method," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 661- 668, Jun 2004.  Full Text Link

3. 16.     B.A. Welchko, M.B. de Rossiter Correa, T.A. Lipo, "A three-level MOSFET inverter for low-power drives," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 669- 674, Jun 2004.  Full Text Link

3. 17.     Wei Wen, Kam-Wah Siu, Yim-Shu Lee, "Design of a single-switch high-power-factor regulator with near-zero output current ripple," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 675- 685, Jun 2004.  Full Text Link

3. 18.     M.J. Embrechts, S. Benedek, "Hybrid identification of nuclear power plant transients with artificial neural networks," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 686- 693, Jun 2004.  Full Text Link

3. 19.     N. Gebraeel, M. Lawley, R. Liu, V. Parmeshwaran, "Residual life predictions from vibration-based degradation signals: a neural network approach," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 694- 700, Jun 2004.  Full Text Link

3. 20.     Kyung Chang Lee, Hyun Hee Kim, Suk Lee, Man Hyung Lee, "Timer selection for satisfying the maximum allowable delay using performance model of profibus token passing protocol," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 701- 710, Jun 2004.  Full Text Link

3. 21.     Min-Jung Lee, Young-Kiu Choi, "An adaptive neurocontroller using RBFN for robot manipulators," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 711- 717, Jun 2004.  Full Text Link

3. 22.     Joon Seop Oh, Yoon Ho Choi, Jin Bae Park, Y.F. Zheng, "Complete coverage navigation of cleaning robots using triangular-cell-based map," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 718- 726, Jun 2004.  Full Text Link

3. 23.     F. Jurado, "Neural network control for dynamic voltage restorer," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 727- 729, Jun 2004.  Full Text Link

3. 24.     Z.H. Shao, "Robust stability of uncertain neutral delay systems," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 730- 733, Jun 2004.  Full Text Link

3. 25.     K.C. Wu, "A comprehensive analysis of current-mode control for DCM buck-boost converters," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 733- 735, Jun 2004.  Full Text Link

3. 26.     R.J. Mantz, H. De Battista, "Comments on "variable-structure PID control to prevent integrator windup"," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 736- 738, Jun 2004.  Full Text Link

3. 27.     A.S. Hodel, C.E. Hall, "Authors' reply to comments on "variable-structure PID control to prevent integrator windup"," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 738- 739, Jun 2004.  Full Text Link

3. 28.     L.U. Gokdere, M.A. Simaan, C.W. Brice, "Response to comments on "passivity-based control of saturated induction motors"," IEEE Trans. on Industrial Electronics, vol. 51, no. 3, pp. 739, Jun 2004.  Full Text Link

Volume 51, Number 4, Aug 2004 Access to the journal on IEEE XPLORE IE Transactions Home Page

4. 1.     G.S. Buja, M.P. Kazmierkowski, "Direct torque control of PWM inverter-fed AC motors - a survey," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 744- 757, Aug 2004.  Full Text Link

4. 2.     N.R.N. Idris, A.H.M. Yatim, "Direct torque control of induction machines with constant switching frequency and reduced torque ripple," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 758- 767, Aug 2004.  Full Text Link

4. 3.     Y.-S. Lai, Wen-Ke Wang, Yen-Chang Chen, "Novel switching techniques for reducing the speed ripple of AC drives with direct torque control," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 768- 775, Aug 2004.  Full Text Link

4. 4.     V. Ambrozic, G.S. Buja, R. Menis, "Band-constrained technique for direct torque control of induction motor," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 776- 784, Aug 2004.  Full Text Link

4. 5.     C. Lascu, I. Boldea, F. Blaabjerg, "Variable-structure direct torque control - a class of fast and robust controllers for induction machine drives," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 785- 792, Aug 2004.  Full Text Link

4. 6.     J. Luukko, O. Pyrhonen, M. Niemela, J. Pyrhonen, "Limitation of the load angle in a direct-torque-controlled synchronous machine drive," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 793- 798, Aug 2004.  Full Text Link

4. 7.     M.F. Rahman, Md.E. Haque, Lixin Tang, Limin Zhong, "Problems associated with the direct torque control of an interior permanent-magnet synchronous motor drive and their remedies," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 799- 809, Aug 2004.  Full Text Link

4. 8.     A. Steimel, "Direct self-control and synchronous pulse techniques for high-power traction inverters in comparison," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 810- 820, Aug 2004.  Full Text Link

4. 9.     K. Yoshida, H. Takami, A. Fujii, "Smooth section crossing of controlled-repulsive PM LSM vehicle by DTC method based on new concept of fictitious section," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 821- 826, Aug 2004.  Full Text Link

4. 10.     J. Rodriguez, J. Pontt, S. Kouro, P. Correa, "Direct torque control with imposed switching frequency in an 11-level cascaded inverter," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 827- 833, Aug 2004.  Full Text Link

4. 11.     J. Rodriguez, J. Pontt, P. Correa, P. Cortes, C. Silva, "A new modulation method to reduce common-mode voltages in multilevel inverters," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 834- 839, Aug 2004.  Full Text Link

4. 12.     M.D.L. del Casale, N. Femia, P. Lamberti, V. Mainardi, "Selection of optimal closed-loop controllers for DC-DC voltage regulators based on nominal and tolerance design," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 840- 849, Aug 2004.  Full Text Link

4. 13.     J. Diaz, F. Nuno, J.M. Lopera, J.A. Martin-Ramos, "A new control strategy for an AC/DC converter based on a piezoelectric transformer," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 850- 856, Aug 2004.  Full Text Link

4. 14.     J. Diaz, J.A. Martin-Ramos, A.M. Pernia, F. Nuno, F.F. Linera, "Intelligent and universal fast charger for Ni-Cd and Ni-MH batteries in portable applications," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 857- 863, Aug 2004.  Full Text Link

4. 15.     Y.P.B. Yeung, K.W.E. Cheng, S.L. Ho, K.K. Law, D. Sutanto, "Unified analysis of switched-capacitor resonant converters," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 864- 873, Aug 2004.  Full Text Link

4. 16.     Wennan Guo, P.K. Jain, "A power-factor-corrected AC-AC inverter topology using a unified controller for high-frequency power distribution architecture," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 874- 883, Aug 2004.  Full Text Link

4. 17.     D. Alexa, A. Sirbu, D.-M. Dobrea, "An analysis of three-phase rectifiers with near-sinusoidal input currents," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 884- 891, Aug 2004.  Full Text Link

4. 18.     Tzann-Shin Lee, "Lagrangian modeling and passivity-based control of three-phase AC/DC voltage-source converters," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 892- 902, Aug 2004.  Full Text Link

4. 19.     S. Kansal, G. Cook, "Use of a sinusoidal series for modeling discrete windowed data as an alternative to interpolation," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 903- 909, Aug 2004.  Full Text Link

4. 20.     S.J. Ovaska, O. Vainio, "Evolutionary-programming-based optimization of reduced-rank adaptive filters for reference generation in active power filters," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 910- 916, Aug 2004.  Full Text Link

4. 21.     W. Panusittikorn, Min Cheol Lee, P.I. Ro, "Modeling and sliding-mode control of friction-based object transport using two-mode ultrasonic excitation," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 917- 926, Aug 2004.  Full Text Link

4. 22.     Sewan Choi, M. Jang, "A reduced-rating hybrid filter to suppress neutral current harmonics in three-phase four-wire systems," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 927- 930, Aug 2004.  Full Text Link

4. 23.     Jee-Hoon Jung, Gang-Youl Jeong, Bong-Hwan Kwon, "Stability improvement of V/f-controlled induction motor drive systems by a dynamic current compensator," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 930- 933, Aug 2004.  Full Text Link

4. 24.     Ming Tsung Tsai, "Design of a compact series-connected AC Voltage regulator with an improved control algorithm," IEEE Trans. on Industrial Electronics, vol. 51, no. 4, pp. 933- 936, Aug 2004.  Full Text Link

Volume 51, Number 5, Oct 2004 Access to the journal on IEEE XPLORE IE Transactions Home Page

5. 1.     Y. Uchimura, T. Yakoh, "Bilateral robot system on the real-time network structure," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 940- 946, Oct 2004.  Full Text Link

5. 2.     K. Itoh, M. Iwasaki, N. Matsui, "Optimal design of robust vibration suppression controller using genetic algorithms," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 947- 953, Oct 2004.  Full Text Link

5. 3.     Y. Hori, "Future vehicle driven by electricity and Control-research on four-wheel-motored "UOT electric march II"," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 954- 962, Oct 2004.  Full Text Link

5. 4.     A. Rojko, K. Jezernik, "Sliding-mode motion controller with adaptive fuzzy disturbance estimation," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 963- 971, Oct 2004.  Full Text Link

5. 5.     K. Loffler, M. Gienger, F. Pfeiffer, H. Ulbrich, "Sensors and control concept of a biped robot," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 972- 980, Oct 2004.  Full Text Link

5. 6.     Jin Zhao, B.K. Bose, "Neural-network-based waveform Processing and Delayless filtering in power electronics and AC drives," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 981- 991, Oct 2004.  Full Text Link

5. 7.     A. Emadi, "Modeling of power electronic loads in AC distribution systems using the generalized State-space averaging method," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 992- 1000, Oct 2004.  Full Text Link

5. 8.     V. Dinavahi, R. Iravani, R. Bonert, "Design of a real-time digital Simulator for a D-STATCOM system," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1001- 1008, Oct 2004.  Full Text Link

5. 9.     B.-R. Lin, Yung-Chuan Lee, "Three-phase power quality compensator under the unbalanced sources and nonlinear loads," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1009- 1017, Oct 2004.  Full Text Link

5. 10.     P. Mattavelli, F.P. Marafao, "Repetitive-based control for selective harmonic compensation in active power filters," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1018- 1024, Oct 2004.  Full Text Link

5. 11.     S.R. Bowes, A. Sevinc, D. Holliday, "New natural observer applied to speed-sensorless DC servo and induction motors," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1025- 1032, Oct 2004.  Full Text Link

5. 12.     M. Hinkkanen, "Analysis and design of full-order flux observers for sensorless induction motors," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1033- 1040, Oct 2004.  Full Text Link

5. 13.     V.-M. Leppanen, J. Luomi, "Speed-sensorless induction Machine control for zero speed and frequency," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1041- 1047, Oct 2004.  Full Text Link

5. 14.     C. Lascu, A.M. Trzynadlowski, "A sensorless hybrid DTC drive for high-volume low-cost applications," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1048- 1055, Oct 2004.  Full Text Link

5. 15.     D. Casadei, G. Serra, A. Tani, L. Zarri, "Theoretical and experimental analysis for the RMS current ripple minimization in induction motor drives controlled by SVM technique," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1056- 1065, Oct 2004.  Full Text Link

5. 16.     H.F. Hofmann, S.R. Sanders, A. EL-Antably, "Stator-flux-oriented vector control of synchronous reluctance Machines with maximized efficiency," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1066- 1072, Oct 2004.  Full Text Link

5. 17.     M.B. de Rossiter Correa, C.B. Jacobina, E.R.C. da Silva, A.M.N. Lima, "Vector control strategies for single-phase induction motor drive systems," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1073- 1080, Oct 2004.  Full Text Link

5. 18.     M.A. Jabbar, A.M. Khambadkone, Zhang Yanfeng, "Space-vector Modulation in a two-phase induction motor drive for constant-power operation," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1081- 1088, Oct 2004.  Full Text Link

5. 19.     G. Poddar, V.T. Ranganathan, "Sensorless field-oriented control for double-inverter-fed wound-rotor induction motor drive," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1089- 1096, Oct 2004.  Full Text Link

5. 20.     J.R. Stack, R.G. Harley, T.G. Habetler, "An amplitude Modulation detector for fault diagnosis in rolling element bearings," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1097- 1102, Oct 2004.  Full Text Link

5. 21.     J.M. Correa, F.A. Farret, L.N. Canha, M.G. Simoes, "An electrochemical-based fuel-cell model suitable for electrical engineering automation approach," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1103- 1112, Oct 2004.  Full Text Link

5. 22.     L. Ben-Brahim, "On the compensation of dead time and zero-current crossing for a PWM-inverter-controlled AC servo drive," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1113- 1118, Oct 2004.  Full Text Link

5. 23.     D.O. Neacsu, "Current control with fast transient for three-phase AC/DC boost converters," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1117- 1121, Oct 2004.  Full Text Link

5. 24.     S. Kansal, G. Cook, "Correction to “Use of a Sinusoidal Series for Modeling Discrete Windowed Data as an Alternative to Interpolation”," IEEE Trans. on Industrial Electronics, vol. 51, no. 5, pp. 1122- 1122, Oct 2004.  Full Text Link

Volume 51, Number 6, Dec 2004 Access to the journal on IEEE XPLORE IE Transactions Home Page

6. 1.     Lingfeng Wang, Bin Huang, Kay Chen Tan, "Fault-tolerant vibration control in a networked and embedded rocket fairing system," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1127- 1141, Dec 2004.  Full Text Link

6. 2.     D.P. Buse, Q.H. Wu, "Mobile agents for remote control of distributed systems," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1142- 1149, Dec 2004.  Full Text Link

6. 3.     Kyung Chang Lee, Man Ho Kim, Suk Lee, Hong Hee Lee, "IEEE-1451-based smart module for in-vehicle networking systems of intelligent vehicles," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1150- 1158, Dec 2004.  Full Text Link

6. 4.     P. Marti, J. Yepez, M. Velasco, R. Villa, J.M. Fuertes, "Managing quality-of-control in network-based control systems by controller and message scheduling co-design," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1159- 1167, Dec 2004.  Full Text Link

6. 5.     J. Garcia, F.R. Palomo, A. Luque, C. Aracil, J.M. Quero, D. Carrion, F. Gamiz, P. Revilla, J. Perez-Tinao, M. Moreno, P. Robles, L.G. Franquelo, "Reconfigurable distributed network control system for industrial plant automation," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1168- 1180, Dec 2004.  Full Text Link

6. 6.     D. Lim, A. Anbuky, "A distributed industrial battery management network," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1181- 1193, Dec 2004.  Full Text Link

6. 7.     A. Prayati, C. Koulamas, S. Koubias, G. Papadopoulos, "A methodology for the development of distributed real-time control applications with focus on task allocation in heterogeneous systems," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1194- 1207, Dec 2004.  Full Text Link

6. 8.     C. Koulamas, S. Koubias, G. Papadopoulos, "Using cut-through forwarding to retain the real-time properties of Profibus over hybrid wired/wireless architectures," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1208- 1217, Dec 2004.  Full Text Link

6. 9.     Y. Tipsuwan, Mo-Yuen Chow, "Gain scheduler middleware: a methodology to enable existing controllers for networked control and teleoperation - part I: networked control," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1218- 1227, Dec 2004.  Full Text Link

6. 10.     Y. Tipsuwan, Mo-Yuen Chow, "Gain scheduler middleware: a methodology to enable existing controllers for networked control and teleoperation-part II: teleoperation," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1228- 1237, Dec 2004.  Full Text Link

6. 11.     M. Di Santo, A. Vaccaro, D. Villacci, E. Zimeo, "A distributed architecture for online power systems security analysis," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1238- 1248, Dec 2004.  Full Text Link

6. 12.     S. Soucek, T. Sauter, "Quality of service concerns in IP-based control systems," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1249- 1258, Dec 2004.  Full Text Link

6. 13.     N. Ando, P. Korondi, H. Hashimoto, "Networked telemicromanipulation systems "Haptic Loupe"," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1259- 1271, Dec 2004.  Full Text Link

6. 14.     H. Takahashi, H. Nishi, K. Ohnishi, "Autonomous decentralized control for formation of multiple mobile robots considering ability of robot," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1272- 1279, Dec 2004.  Full Text Link

6. 15.     O. Ojo, "The generalized discontinuous PWM scheme for three-phase voltage source inverters," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1280- 1289, Dec 2004.  Full Text Link

6. 16.     In-Dong Kim, Eui-Cheol Nho, Heung-Geun Kim, Jong Sun Ko, "A generalized Undeland snubber for flying capacitor multilevel inverter and converter," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1290- 1296, Dec 2004.  Full Text Link

6. 17.     A. Sangswang, C.O. Nwankpa, "Noise characteristics of DC-DC boost converters: experimental validation and performance evaluation," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1297- 1304, Dec 2004.  Full Text Link

6. 18.     S.C.O. Mathuna, P. Byrne, G. Duffy, W. Chen, M. Ludwig, T. O'Donnell, P. McCloskey, M. Duffy, "Packaging and integration technologies for future high-frequency power supplies," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1305- 1312, Dec 2004.  Full Text Link

6. 19.     Tzu-Yen Chang, Xu Wang, D.A. Evans, S.L. Roberson, J.P. Zheng, "Characterization of tantalum oxide-ruthenium oxide hybrid capacitors," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1313- 1317, Dec 2004.  Full Text Link

6. 20.     M. Hinkkanen, J. Luomi, "Stabilization of regenerating-mode operation in sensorless induction motor drives by full-order flux observer design," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1318- 1328, Dec 2004.  Full Text Link

6. 21.     G. Poddar, V.T. Ranganathan, "Direct torque and frequency control of double-inverter-fed slip-ring induction motor drive," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1329- 1337, Dec 2004.  Full Text Link

6. 22.     M.A. Jabbar, A.M. Khambadkone, Guo Chun, "Quasi-resonant-converters-based high-efficiency spindle motor drives for magnetic data storage," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1338- 1343, Dec 2004.  Full Text Link

6. 23.     Liang-Rui Chen, "PLL-based battery charge circuit topology," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1344- 1346, Dec 2004.  Full Text Link

6. 24.     L.S. Kei, K. Sridharan, T. Srikanthan, "Hardware-efficient schemes for logarithmic approximation and binary search with application to visibility graph construction," IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1346- 1348, Dec 2004.  Full Text Link