IEEE Transactions on Industrial Electronics
IEEE Transactions on Industrial Electronics
1. 1. I.L. Erickson, "Implementing a carrier-band node using VLSI,"
IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 1-5, Feb.1988. Abstract
Link
1. 2. H.A. Schutz, "The role of
1. 3. L. Ciminiera, C.
Demartini, A. Valenzano, "Industrial IEEE
802.3 networks with short delivery time for urgent messages," IEEE Trans. on
Industrial Electronics, vol. 35, no. 1, pp. 13-17, Feb.1988. Abstract
Link
1. 4. R.C. Luo, "A microcomputer-based
intelligent sensor for multiaxis force/torque
measurement," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp.
18-25, Feb.1988. Abstract
Link
1. 5. K. Furuta, K. Kosuge,
N. Mukai, "Control of articulated robot arm with
sensory feedback: laser beam tracking system," IEEE Trans. on Industrial
Electronics, vol. 35, no. 1, pp. 26-30, Feb.1988. Abstract
Link
1. 6. M. Kabuka, J. Desoto, J. Miranda, "Robot
vision tracking system," IEEE Trans. on Industrial Electronics, vol. 35, no.
1, pp. 31-39, Feb.1988. Abstract
Link
1. 7. K. Furuta, M. Sampei,
"Path control of a three-dimensional linear motional mechanical system using
laser," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 40-51,
Feb.1988. Abstract
Link
1. 8. A.M. Trzynadlowski, "Energy optimization
of a certain class of incremental motion DC drives," IEEE Trans. on Industrial
Electronics, vol. 35, no. 1, pp. 52-59, Feb.1988. Abstract
Link
1. 9. P.P. Acarnley, A. Hughes, "Machine/drive
circuit interactions in small variable-reluctance stepping and brushless DC
motor systems," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp.
60-66, Feb.1988. Abstract
Link
1. 10. Z.K. Wu, E.G. Strangas, "Feed forward
field orientation control of an induction motor using a PWM voltage source
inverter and standardized single-board computers ," IEEE Trans. on Industrial
Electronics, vol. 35, no. 1, pp. 67-74, Feb.1988. Abstract
Link
1. 11. D.W.J. Pulle, A. Hughes, "High-speed
performance of variable-reluctance stepmotors,"
IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 75-79, Feb.1988. Abstract
Link
1. 12. G.C. Verghese, S.R. Sanders, "Observers
for flux estimation in induction machines," IEEE Trans. on Industrial Electronics,
vol. 35, no. 1, pp. 80-84, Feb.1988. Abstract
Link
1. 13. K. Saito, K. Kamiyama, T.
Ohmae, T. Matsuda, "A microprocessor-controlled
speed regulator with instantaneous speed estimation for motor drives," IEEE Trans.
on Industrial Electronics, vol. 35, no. 1, pp. 85-94, Feb.1988. Abstract
Link
1. 14. H. Hanselmann, A.
Engelke, "LQG-control of a highly resonant disk drive head positioning
actuator," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 95-99,
Feb.1988. Abstract
Link
1. 15. Y.-S. Li, T.Y. Young, J.A. Magerl, "Subpixel
edge detection and estimation with a microprocessor-controlled line scan
camera," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 100-104,
Feb.1988. Abstract
Link
1. 16. W.K.N. Anakwa, M.N.S.
Swamy, "Boiler plant control using a minimum order
dynamic pole placement compensator," IEEE Trans. on Industrial Electronics,
vol. 35, no. 1, pp. 105-112, Feb.1988. Abstract
Link
1. 17. T. Fong-Chwee, H.R.
Sirisena, "Self-tuning PID controllers for dead time processes,"
IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp. 113-118, Feb.1988. Abstract
Link
1. 18. J. Tan, N. Kyriakopoulos, "Implementation
of a tracking Kalman filter on a digital signal
processor," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp.
119-125, Feb.1988. Abstract
Link
1. 19. G.A. Girgis, K. Horn, G. Kruse,
"Measurement of mechanical vibrations using eddy current transducers and simple
digital demodulating techniques," IEEE Trans. on Industrial Electronics, vol.
35, no. 1, pp. 126-134, Feb.1988. Abstract
Link
1. 20. G.-H. Choe, M.-H. Park, "A new injection
method for AC harmonic elimination by active power filter," IEEE Trans. on
Industrial Electronics, vol. 35, no. 1, pp. 135-140, Feb.1988. Abstract
Link
1. 21. Y.-S. Lee, Y.C. Cheng, "Computer-aided analysis of electronic DC-DC
transformers," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp.
141-147, Feb.1988. Abstract
Link
1. 22. A.K.S. Bhat, S.B.
Dewan, "A novel utility interfaced high-frequency link photovoltaic power
conditioning system," IEEE Trans. on Industrial Electronics, vol. 35, no. 1,
pp. 148-152, Feb.1988. Abstract
Link
1. 23. B.K. Bose, "Technology trends in microcomputer control of electrical
machines ," IEEE Trans. on Industrial Electronics, vol. 35, no. 1, pp.
153-159, Feb.1988. Abstract
Link
2. 1. M. Hirose, S. Matsushige, S.
Buma, K. Kamiya, "Toyota
electronic modulated air suspension system for the 1986
Soarer," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp.
193-200, May.1988. Abstract
Link
2. 2. T. Torii, S. Azuma, Y. Matsuzaki, "Multidisplay
system [automobile displays]," IEEE Trans. on Industrial Electronics, vol. 35,
no. 2, pp. 201-207, May.1988. Abstract
Link
2. 3. M. Hirano, M. Takeuchi, T. Tomoda, K.-I.
Nakano, "Keyless entry system with radio card transponder [automobiles],"
IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 208-216,
May.1988. Abstract
Link
2. 4. M.R. Kabuka, P.N.
Glaskowsky, J. Miranda, "Microcontroller-based architecture for control
of a six joint robot arm," IEEE Trans. on Industrial Electronics, vol. 35, no.
2, pp. 217-221, May.1988. Abstract
Link
2. 5. W.-K. Chung, H.S. Cho, "On the dynamic
characteristics of a balance
2. 6. A.A. Goldenberg, L. Chan, "An approach to real-time control of robots
in task space. Application to control of
2. 7. K.R. Davey, G.J.
Vachtsevanos, R. Bass, G. Kelly, D. Ross, "Analysis and control of
low-speed fractional horsepower synchronous drive motors," IEEE Trans. on
Industrial Electronics, vol. 35, no. 2, pp. 239-244, May.1988. Abstract
Link
2. 8. T.L. Laopoulos, C.A.
Karybakas, "A phase locked motor speed control system with
sample-and-hold phase detector," IEEE Trans. on Industrial Electronics, vol.
35, no. 2, pp. 245-252, May.1988. Abstract
Link
2. 9. E.Y.Y. Ho, P.C. Sen, "Decoupling control
of induction motor drives," IEEE Trans. on Industrial Electronics, vol. 35,
no. 2, pp. 253-262, May.1988. Abstract
Link
2. 10. H. Huisman, "A three-phase to three-phase
series-resonant power converter with optimal input current waveforms. I. Control
strategy," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 263-268,
May.1988. Abstract
Link
2. 11. H. Huisman, "A three-phase to three-phase
series-resonant power converter with optimal input current waveforms. II.
Applications and results," IEEE Trans. on Industrial Electronics, vol. 35, no.
2, pp. 269-277, May.1988. Abstract
Link
2. 12. S.F. Gorman, J.J. Cathey, J.A. Weimer, "A
multi-microprocessor controller for a VV-VF cycloconverter-link
brushless DC motor drive," IEEE Trans. on Industrial Electronics, vol. 35, no.
2, pp. 278-283, May.1988. Abstract
Link
2. 13. J.-Y. Lee, Y.-Y. Sun, "Novel sinusoidal
pulsewidth modulation schemes for voltage-source inverters with
fluctuating input voltage," IEEE Trans. on Industrial Electronics, vol. 35,
no. 2, pp. 284-294, May.1988. Abstract
Link
2. 14. A. Kawamura, R. Chuarayapratip, T.
Haneyoshi, "Deadbeat control of PWM inverter with
modified pulse patterns for uninterruptible power supply," IEEE Trans. on
Industrial Electronics, vol. 35, no. 2, pp. 295-300, May.1988. Abstract
Link
2. 15. A. Barili, A.
Brambilla, G. Cottafava, E.
Dallago, "A simulation model for the
saturable reactor," IEEE Trans. on Industrial
Electronics, vol. 35, no. 2, pp. 301-306, May.1988. Abstract
Link
2. 16. I. Maric, "Automatic digital correction
of measurement data based on
2. 17. H.-H. Loh, J.-G. Leu,
R.C. Luo, "The analysis of natural textures using
run length features," IEEE Trans. on Industrial Electronics, vol. 35, no. 2,
pp. 323-328, May.1988. Abstract
Link
2. 18. R.A.M. Browne, S.W.H. De Haan, J.B.
Klaassens, J.D. Lodder,
D.J. Verheul, "Computer-aided design of
toroidal air-core inductors for high energy levels,"
IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp. 329-337,
May.1988. Abstract
Link
2. 19. C.F. Christiansen, J.L. Herrada, M.I.
Valla, N.H. Martinez, "Further improvements in a
three-phase sine wave generator," IEEE Trans. on Industrial Electronics, vol.
35, no. 2, pp. 338-339, May.1988. Abstract
Link
2. 20. P.S.M. Chin, "Comments on `Stability analysis, design, and simulation
of a closed-loop converter-controlled DC drive' by P.B.
Anjaneyulu, et al," IEEE Trans. on Industrial Electronics, vol. 35, no.
2, pp. 339-341, May.1988. Abstract
Link
2. 21. A.A. El-Amawy, A.
Mirbod, "An efficient software-controlled
2. 22. L. Ciminiera, A.
Valenzano, "Acknowledgement and priority mechanisms in the 802.4
token-bus," IEEE Trans. on Industrial Electronics, vol. 35, no. 2, pp.
307-316, May.1988. Abstract
Link
3. 1. J.H. Peden, A.C. Weaver, "Are priorities
useful in an 802.5 token ring?," IEEE Trans. on Industrial Electronics, vol.
35, no. 3, pp. 361-365, Aug.1988. Abstract
Link
3. 2. R.M. Gorur, A.C. Weaver, "Setting target
rotation times in an IEEE token bus network," IEEE Trans. on Industrial
Electronics, vol. 35, no. 3, pp. 366-371, Aug.1988. Abstract
Link
3. 3. W. Gora, U. Herzog, S.K.
Tripathi, "Clock synchronization on the factory
floor (
3. 4. S.K. Dean, R.J.F. Dow, "A versatile controller for 3-D machining,"
IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 381-386, Aug.1988. Abstract
Link
3. 5. K.S.M. Panicker, S.I.
Ahson, C.M. Bhatia, "Microprocessor-based sliding mode controller for a
micromachine," IEEE Trans. on Industrial Electronics,
vol. 35, no. 3, pp. 387-392, Aug.1988. Abstract
Link
3. 6. C.-M. Liaw, C.-T. Pan, Y.-C. Chen, "Design
and implementation of an adaptive controller for current-fed induction
motor," IEEE Trans. on Industrial Electronics, vol.
35, no. 3, pp. 393-401, Aug.1988. Abstract
Link
3. 7. R.C. Becerra, M. Ehsani, "High-speed
torque control of brushless permanent magnet motors," IEEE Trans. on Industrial
Electronics, vol. 35, no. 3, pp. 402-406, Aug.1988. Abstract
Link
3. 8. K.F. Teng, R.W. Vest, "A
microprocessor-controlled ink jet printing system for electronic circuits,"
IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp. 407-412, Aug.1988. Abstract
Link
3. 9. H.-Y. Chung, Y.-Y. Sun, "Parameter identification of linear
distributed systems via
3. 10. P.C. Baracos, R.D. Hudson, L.J.
Vroomen, P.J.A. Zsombor-Murray,
"Advances in binary decision based programmable controllers," IEEE Trans. on
Industrial Electronics, vol. 35, no. 3, pp. 417-425, Aug.1988. Abstract
Link
3. 11. E.M. Thomson, P.J. Medelius, M.A.
Uman, "A remote sensor for the three components of
transient electric fields," IEEE Trans. on Industrial Electronics, vol. 35,
no. 3, pp. 426-433, Aug.1988. Abstract
Link
3. 12. A.K. Chattopadhyay, N.
Mether, "A generalized approach to steady-state
analysis of a current-source inverter with induction motor load including
commutation overlap," IEEE Trans. on Industrial Electronics, vol. 35, no. 3,
pp. 434-441, Aug.1988. Abstract
Link
3. 13. A. Khoei, S.
Yuvarajan, "Single-phase AC-AC converters using power
MOSFETs," IEEE Trans. on Industrial Electronics,
vol. 35, no. 3, pp. 442-443, Aug.1988. Abstract
Link
3. 14. P.G. Maranesi, V.
Tavazzi, V. Varoli, "Two-part
characterization of PWM voltage regulators at low frequencies," IEEE Trans. on
Industrial Electronics, vol. 35, no. 3, pp. 444-450, Aug.1988. Abstract
Link
3. 15. J.-P. Vandelac, P.D.
Ziogas, "A DC to DC PWM series resonant converter operated at resonant
frequency," IEEE Trans. on Industrial Electronics, vol. 35, no. 3, pp.
451-460, Aug.1988. Abstract
Link
3. 16. A.R. Prasad, P.D. Ziogas, S. Manias, "A
comparative evaluation of SMR converters with and without active input current
waveshaping," IEEE Trans. on Industrial Electronics,
vol. 35, no. 3, pp. 461-468, Aug.1988. Abstract
Link
3. 17. L.W. Tao, C.Z. Fang, "State estimation of output-decoupled complex
systems with application to fluid pipeline," IEEE Trans. on Industrial
Electronics, vol. 35, no. 3, pp. 469-475, Aug.1988. Abstract
Link
3. 18. P.S. Rao, V.
Ramachandran, "Evaluation of performance criteria of the
4. 1. A. Moghaddamjoo, "Step-like signal
processing with distinct finite number of levels ," IEEE Trans. on Industrial
Electronics, vol. 35, no. 4, pp. 489-493, Nov.1988. Abstract
Link
4. 2. A.K.S. Bhat, "Analysis and design of a
DC/DC converter using square-wave output resonant inverter," IEEE Trans. on
Industrial Electronics, vol. 35, no. 4, pp. 494-501, Nov.1988. Abstract
Link
4. 3. C.F. Christiansen, M.I. Valla, C.H.
Rivetta, "A synchronization technique for static
delta-modulated PWM inverters," IEEE Trans. on Industrial Electronics, vol.
35, no. 4, pp. 502-507, Nov.1988. Abstract
Link
4. 4. J.W. Dixon, Boon-Teck
Ooi, "Indirect current control of a unity power factor sinusoidal current
boost type three-phase rectifier," IEEE Trans. on Industrial Electronics, vol.
35, no. 4, pp. 508-515, Nov.1988. Abstract
Link
4. 5. Tian-Hua Liu, Chung-Ming Young, Chang-Huan
Liu, "Microprocessor-based controller design and simulation for a permanent
magnet synchronous motor drive," IEEE Trans. on Industrial Electronics, vol.
35, no. 4, pp. 516-523, Nov.1988. Abstract
Link
4. 6. R.M. Davis, "A comparison of switched reluctance rotor structures,"
IEEE Trans. on Industrial Electronics, vol. 35, no. 4, pp. 524-529, Nov.1988. Abstract
Link
4. 7. G.K. Dubey, "Analysis of DC drive fed by
single-phase half-controlled converters in sequence control," IEEE Trans. on
Industrial Electronics, vol. 35, no. 4, pp. 530-536, Nov.1988. Abstract
Link
4. 8. P. Pillay, R. Krishnan, "Modeling of
permanent magnet motor drives," IEEE Trans. on Industrial Electronics, vol.
35, no. 4, pp. 537-541, Nov.1988. Abstract
Link
4. 9. M.F. Rahman, Aun-Neow
Poo, "An application oriented test procedure for
designing microstepping step motor controllers,"
IEEE Trans. on Industrial Electronics, vol. 35, no. 4, pp. 542-546, Nov.1988. Abstract
Link
4. 10. B.K. Bose, P.M. Szczesny, "A
microcomputer-based control and simulation of an advanced IPM synchronous
machine drive system for electric vehicle propulsion," IEEE Trans. on Industrial
Electronics, vol. 35, no. 4, pp. 547-559, Nov.1988. Abstract
Link
4. 11. R. Krishnan, A.S. Bharadwaj, P.N.
Materu, "Computer-aided design of electrical
machines for variable speed applications," IEEE Trans. on Industrial Electronics,
vol. 35, no. 4, pp. 560-571, Nov.1988. Abstract
Link
4. 12. D. Ciscato, A. Fehl,
L. Turolla, "Microstep control of floppy disk
drive," IEEE Trans. on Industrial Electronics, vol. 35, no. 4, pp. 572-575,
Nov.1988. Abstract
Link
1. 1. T.C.S. Hsia, "A new technique for robust
control of servo systems," IEEE Trans. on Industrial Electronics, vol. 36, no.
1, pp. 1-7, Feb.1989. Abstract
Link
1. 2. M.R. Khare, G.N.
Garud, "Microprocessor-based thyristorized
control system for speed control of coiler motor," IEEE Trans. on Industrial
Electronics, vol. 36, no. 1, pp. 8-17, Feb.1989. Abstract
Link
1. 3. A. Rahrooh, T.T. Hartley, "Adaptive matrix
integration for real-time simulation," IEEE Trans. on Industrial Electronics,
vol. 36, no. 1, pp. 18-24, Feb.1989. Abstract
Link
1. 4. Chin-Cheng Kau, K.W. Olson, E.A.
Ribble, C.A. Klein, "Design and implementation of a
vision processing system for a walking machine," IEEE Trans. on Industrial
Electronics, vol. 36, no. 1, pp. 25-33, Feb.1989. Abstract
Link
1. 5. P.K. Chande, A.K.
Ramani, P.C. Sharma, "Modular
1. 6. M. Morimoto, S. Sato, K. Sumito, K.
Oshitani, "Single-chip microcomputer control of the
inverter by the magnetic flux control PWM method [machine control]," IEEE Trans.
on Industrial Electronics, vol. 36, no. 1, pp. 42-47, Feb.1989. Abstract
Link
1. 7. J.B. Klaassens, "Steady-state analysis of
a series-resonant DC-DC converter with a bipolar power flow," IEEE Trans. on
Industrial Electronics, vol. 36, no. 1, pp. 48-55, Feb.1989. Abstract
Link
1. 8. D.G. Manzer, M. Varghese, J.S. Thorp,
"Variable reluctance motor characterization," IEEE Trans. on Industrial
Electronics, vol. 36, no. 1, pp. 56-63, Feb.1989. Abstract
Link
1. 9. J.J. Jozwik, M.K.
Kazimierczuk, "Dual sepic PWM switching-mode
DC/DC power converter," IEEE Trans. on Industrial Electronics, vol. 36, no. 1,
pp. 64-70, Feb.1989. Abstract
Link
1. 10. K.F. Teng, Ping Wu, "PV module
characterization using
1. 11. W. Ahmad, "A simple analogue multiplier with analogue/digital
output," IEEE Trans. on Industrial Electronics, vol. 36, no. 1, pp. 76-78,
Feb.1989. Abstract
Link
1. 12. C.F. Christiansen, R. Battaiotto, D.
Fernandez, E. Tacconi, "Digital measurement of
angular velocity for speed control," IEEE Trans. on Industrial Electronics,
vol. 36, no. 1, pp. 79-83, Feb.1989. Abstract
Link
1. 13. S. Khalaf, M. Zhu, P.
Siy, M. Abdelguerfi, "A
real-time industrial pattern classification system," IEEE Trans. on Industrial
Electronics, vol. 36, no. 1, pp. 84-85, Feb.1989. Abstract
Link
1. 14. Y.C. Liang, V.J.
Gosbell, "A versatile switch model for power electronics SPICE2
simulations ," IEEE Trans. on Industrial Electronics, vol. 36, no. 1, pp.
86-88, Feb.1989. Abstract
Link
1. 15. G. Ciccarella, P.
Marietti, "Model reference adaptive control of a thermostatic chamber,"
IEEE Trans. on Industrial Electronics, vol. 36, no. 1, pp. 88-93, Feb.1989. Abstract
Link
1. 16. C.H. Rivetta, E.J.
Tacconi, "Comments, with reply, on `An adaptive digital pump controller
for phase-locked servo systems' by G.-C. Hsieh et al," IEEE Trans. on Industrial
Electronics, vol. 36, no. 1, pp. 93-95, Feb.1989. Abstract
Link
2. 1. C.F. Hawkins, H.T. Nagle, R.R. Fritzemeier,
J.R. Guth, "The VLSI circuit test problem-a
tutorial," IEEE Trans. on Industrial Electronics, vol. 36, no. 2, pp. 111-116,
May.1989. Abstract
Link
2. 2. R.R. Fritzemeier, H.T. Nagle, C.F.
Hawkins, "Fundamentals of testability-a tutorial," IEEE Trans. on Industrial
Electronics, vol. 36, no. 2, pp. 117-128, May.1989. Abstract
Link
2. 3. H.T. Nagle, S.C. Roy, C.F. Hawkins, M.G. McNamer,
R.R. Fritzemeier, "Design for testability and
built-in self test: a review," IEEE Trans. on Industrial Electronics, vol. 36,
no. 2, pp. 129-140, May.1989. Abstract
Link
2. 4. M.G. McNamer, S.C. Roy, H.T. Nagle,
"Statistical fault sampling," IEEE Trans. on Industrial Electronics, vol. 36,
no. 2, pp. 141-150, May.1989. Abstract
Link
2. 5. H.T. Nagle, R.R. Fritzemeier, J.E. Van
Well, M.G. McNamer, "Microprocessor testability,"
IEEE Trans. on Industrial Electronics, vol. 36, no. 2, pp. 151-163, May.1989. Abstract
Link
2. 6. J.J. Arena, "Calculating the effective pattern rate for high-speed
board test applications," IEEE Trans. on Industrial Electronics, vol. 36, no.
2, pp. 164-174, May.1989. Abstract
Link
2. 7. S.-J. Tsai, C.D. Hechtman, "A custom
hybrid GaAs driver and sensor device for a
high-speed test system," IEEE Trans. on Industrial Electronics, vol. 36, no.
2, pp. 175-184, May.1989. Abstract
Link
2. 8. C.W. Branson, "Integrated pin electronic for a VLSI test system,"
IEEE Trans. on Industrial Electronics, vol. 36, no. 2, pp. 185-191, May.1989. Abstract
Link
2. 9. C.D. Hechtman, "In-circuit test fixture
[PCB testing]," IEEE Trans. on Industrial Electronics, vol. 36, no. 2, pp.
192-196, May.1989. Abstract
Link
2. 10. E.J. McCluskey, F.
Buelow, "IC quality and test transparency," IEEE Trans. on Industrial
Electronics, vol. 36, no. 2, pp. 197-202, May.1989. Abstract
Link
2. 11. W.D. Ballew, L.M. Streb, "Incoming test
strategy based upon in-process failure and repair costs," IEEE Trans. on
Industrial Electronics, vol. 36, no. 2, pp. 203-210, May.1989. Abstract
Link
2. 12. C.F. Hawkins, J.M. Soden, R.R.
Fritzemeier, L.K. Horning, "Quiescent power supply
current measurement for
2. 13. P.P. Fasang, "Analog/digital ASIC design
for testability," IEEE Trans. on Industrial Electronics, vol. 36, no. 2, pp.
219-226, May.1989. Abstract
Link
2. 14. K.D. Wagner, T.W. Williams, "Design for testability of analog/digital
networks," IEEE Trans. on Industrial Electronics, vol. 36, no. 2, pp. 227-230,
May.1989. Abstract
Link
2. 15. J.-C. Lien, M.A. Breuer, "A universal
test and maintenance controller for modules and boards ," IEEE Trans. on
Industrial Electronics, vol. 36, no. 2, pp. 231-240, May.1989. Abstract
Link
2. 16. M.G. Karpovsky, P.
Nagvajara, "Design of self-diagnostic boards by signature analysis,"
IEEE Trans. on Industrial Electronics, vol. 36, no. 2, pp. 241-245, May.1989. Abstract
Link
2. 17. P. Mazumder, J.H. Patel, "An efficient
built-in self testing for random-access memory," IEEE Trans. on Industrial
Electronics, vol. 36, no. 2, pp. 246-253, May.1989. Abstract
Link
2. 18. S. Mourad, E.J.
McCluskey, "Testability of parity checkers," IEEE Trans. on Industrial
Electronics, vol. 36, no. 2, pp. 254-262, May.1989. Abstract
Link
2. 19. F. Brglez, D. Bryan, J. Calhoun, G.
Kedem, R. Lisanke,
"Automated synthesis for testability," IEEE Trans. on Industrial Electronics,
vol. 36, no. 2, pp. 263-277, May.1989. Abstract
Link
2. 20. J.J. Hallenbeck, N.
Kanopoulos, J.R. Cybrynski, "The Test
Engineer's Assistant: a design environment for testable and diagnosable
systems," IEEE Trans. on Industrial Electronics, vol. 36, no. 2, pp. 278-285,
May.1989. Abstract
Link
2. 21. C. Robach, P. Wodey,
"Linking d
3. 1. J.H. Kim, Z. Bien, "An algorithmic
approach to fault diagnosis in linear systems," IEEE Trans. on Industrial
Electronics, vol. 36, no. 3, pp. 313-320, Aug.1989. Abstract
Link
3. 2. J.-X. Xu, H. Hashimoto, J.-J.E.
Slotine, Y. Arai, F. Harashima,
"Implementation of VSS control to robotic manipulators-smoothing modification,"
IEEE Trans. on Industrial Electronics, vol. 36, no. 3, pp. 321-329,
Aug.1989. Abstract
Link
3. 3. W.L. Nelson, "Continuous steering-function control of robot carts,"
IEEE Trans. on Industrial Electronics, vol. 36, no. 3, pp. 330-337, Aug.1989. Abstract
Link
3. 4. C. Umeagukwu, B.
Maqueira, R. Lambert, "Robotic acoustic seam tracking: system development
and application ," IEEE Trans. on Industrial Electronics, vol. 36, no. 3, pp.
338-348, Aug.1989. Abstract
Link
3. 5. H. Haneda, A. Nagao, "Digitally controlled
optimal position servo of induction motors," IEEE Trans. on Industrial
Electronics, vol. 36, no. 3, pp. 349-360, Aug.1989. Abstract
Link
3. 6. Jong-Hwan Kim, Yeon-Chan
Hong, Sung-Jun Lee, Keh-Kun
Choi, "Direct adaptive control of nonminimum
phase systems using integral action," IEEE Trans. on Industrial Electronics,
vol. 36, no. 3, pp. 361-364, Aug.1989. Abstract
Link
3. 7. G.-C. Hsieh, "A study on position servo control systems by
frequency-locked technique," IEEE Trans. on Industrial Electronics, vol. 36,
no. 3, pp. 365-373, Aug.1989. Abstract
Link
3. 8. L.A. Jones, J.H. Lang, "A state observer for the permanent-magnet
synchronous motor," IEEE Trans. on Industrial Electronics, vol. 36, no. 3, pp.
374-382, Aug.1989. Abstract
Link
3. 9. K.C. Cheok, H.X. Hu,
N.K. Loh, "Discrete-time frequency-shaping
parametric
3. 10. A.P. Jayasumana, G.G.
Jayasumana, "On the use of the IEEE 802.4 token bus
in distributed real-time control systems," IEEE Trans. on Industrial Electronics,
vol. 36, no. 3, pp. 391-397, Aug.1989. Abstract
Link
3. 11. R.M. Nelms, B.W. Evans, L.L. Grigsby,
"Simulation of AC spacecraft power systems," IEEE Trans. on Industrial
Electronics, vol. 36, no. 3, pp. 398-402, Aug.1989. Abstract
Link
3. 12. B.K. Bose, "Power electronics-an emerging technology," IEEE Trans. on
Industrial Electronics, vol. 36, no. 3, pp. 403-412, Aug.1989. Abstract
Link
3. 13. A. Patra, G.P. Rao,
"General hybrid orthogonal functions-a new tool for the analysis of power
electronic systems," IEEE Trans. on Industrial Electronics, vol. 36, no. 3,
pp. 413-424, Aug.1989. Abstract
Link
3. 14. M.K. Kazimierczuk, X.T. Bui, "Class-E
DC/DC converters with a capacitive impedance inverter," IEEE Trans. on Industrial
Electronics, vol. 36, no. 3, pp. 425-433, Aug.1989. Abstract
Link
3. 15. M. Sakui, H. Fujita, M.
Shioya, "A method for calculating harmonic currents
of a three-phase bridge uncontrolled rectifier with DC filter," IEEE Trans. on
Industrial Electronics, vol. 36, no. 3, pp. 434-440, Aug.1989. Abstract
Link
3. 16. S. Martinez, M. Castro, R. Antoranz, F.
Aldana, "Off-line uninterruptible power supply with
zero transfer time using integrated magnetics,"
IEEE Trans. on Industrial Electronics, vol. 36, no. 3, pp. 441-445, Aug.1989. Abstract
Link
3. 17. C.M. Tan, S. Zukotynski, "Single wafer
miniature Hall-effect keyboard," IEEE Trans. on Industrial Electronics, vol.
36, no. 3, pp. 446-450, Aug.1989. Abstract
Link
3. 18. L.J. Giacoletto, "Simple
4. 1. I.R. Smith, G. Creighton, L.M.C. Mhango,
"Analysis and performance of a novel two-phase drive for fan and water-pumping
applications," IEEE Trans. on Industrial Electronics, vol. 36, no. 4, pp.
530-538, Nov.1989. Abstract
Link
4. 2. J. Shiozaki, B. Shibata, H.
Matsuyama, E. O'shima,
"Fault diagnosis of chemical processes utilizing signed directed
graphs-improvement by using temporal information," IEEE Trans. on Industrial
Electronics, vol. 36, no. 4, pp. 469-474, Nov.1989. Abstract
Link
4. 3. J. Holtz, U. Boelkens, "Direct frequency
convertor with sinusoidal line currents for
speed-variable AC motors," IEEE Trans. on Industrial Electronics, vol. 36, no.
4, pp. 475-479, Nov.1989. Abstract
Link
4. 4. J.L. Duarte, J.F. Aubry, C.
Iung, "Current and speed digital control of
commutationless DC drives," IEEE Trans. on Industrial
Electronics, vol. 36, no. 4, pp. 480-484, Nov.1989. Abstract
Link
4. 5. I. Batarseh, C.Q. Lee, "High-frequency
high-order parallel resonant converter," IEEE Trans. on Industrial Electronics,
vol. 36, no. 4, pp. 485-498, Nov.1989. Abstract
Link
4. 6. D.M. Vasiljevic, "The design of a
battery-operated fluorescent lamp," IEEE Trans. on Industrial Electronics,
vol. 36, no. 4, pp. 499-503, Nov.1989. Abstract
Link
4. 7. H. Nagase, T. Okuyama, J. Takahashi, K.
Saitoh, "A method for suppressing torque ripple of
an AC motor by current amplitude control," IEEE Trans. on Industrial Electronics,
vol. 36, no. 4, pp. 504-510, Nov.1989. Abstract
Link
4. 8. L.-S. Shieh, X.-M. Zhao, J.-L. Zhang,
"Locally optimal-digital redesign of continuous-time systems," IEEE Trans. on
Industrial Electronics, vol. 36, no. 4, pp. 511-515, Nov.1989. Abstract
Link
4. 9. K.E. Addoweesh, W. Shepherd, L.N.
Hulley, "Induction motor speed control using a
microprocessor-based PWM inverter," IEEE Trans. on Industrial Electronics,
vol. 36, no. 4, pp. 516-522, Nov.1989. Abstract
Link
4. 10. P.N. Materu, R. Krishnan, "Steady-state
analysis of the variable-speed switched-reluctance motor drive," IEEE Trans. on
Industrial Electronics, vol. 36, no. 4, pp. 523-529, Nov.1989. Abstract
Link
4. 11. G. Amaratunga, K.-W. Kwan, M.
Tso, D. Crawley, "A single-chip
4. 12. Y.-S. Li, T.Y. Young, C.-C. Huang, "Noncontact measurement using
line-scan cameras: Analysis of positioning error," IEEE Trans. on Industrial
Electronics, vol. 36, no. 4, pp. 545-551, Nov.1989. Abstract
Link
4. 13. C. Hutchens, C. Yap, "Continuous background monitoring of plant
performance utilizing a single-chip microcomputer and
4. 14. S. Miyazawa, F. Nakamura, N. Yamada, "A novel strategy for
microcomputer-based control of a single-phase output
cycloconverter," IEEE Trans. on Industrial Electronics, vol. 36, no. 4,
pp. 560-567, Nov.1989. Abstract
Link
4. 15. M.K. Kazimierczuk, J.
Jozwik, "Resonant DC/DC converter with class-E
inverter and class-E rectifier," IEEE Trans. on Industrial Electronics, vol.
36, no. 4, pp. 468-478, Nov.1989. Abstract
Link
1. 1. N. Hamada, K. Bekki, T. Yokota, "VLSI
logic design with logic programming and knowledge-base technology," IEEE Trans. on
Industrial Electronics, vol. 37, no. 1, pp. 1-5, Feb.1990. Abstract
Link
1. 2. S. Komada, K. Ohnishi, "Force feedback
control of robot manipulator by the acceleration tracing orientation method,"
IEEE Trans. on Industrial Electronics, vol. 37, no. 1, pp. 6-12, Feb.1990. Abstract
Link
1. 3. H.-G. Yeh, "Real-time
implementation of a narrow-band Kalman filter
with a floating-point processor DSP32," IEEE Trans. on Industrial Electronics,
vol. 37, no. 1, pp. 13-18, Feb.1990. Abstract
Link
1. 4. R.D. Williams, F.J. Keith, P.E. Allaire,
"Digital control of active magnetic bearings," IEEE Trans. on Industrial
Electronics, vol. 37, no. 1, pp. 19-27, Feb.1990. Abstract
Link
1. 5. T. Egami, H. Morita, T. Tsuchiya,
"Efficiency optimized model reference adaptive control system for a DC motor,"
IEEE Trans. on Industrial Electronics, vol. 37, no. 1, pp. 28-33, Feb.1990. Abstract
Link
1. 6. J.S. Hsu, A.M.A. Amin, "Torque
calculations of current-source induction machines using the 1-2-0 coordinate
system," IEEE Trans. on Industrial Electronics, vol. 37, no. 1, pp. 34-40,
Feb.1990. Abstract
Link
1. 7. C.C. Chan, W.S. Leung, C.W. Ng, "Adaptive decoupling control of
induction motor drives," IEEE Trans. on Industrial Electronics, vol. 37, no.
1, pp. 41-47, Feb.1990. Abstract
Link
1. 8. N. Mutoh, A. Ueda, K. Sakai, M. Hattori, K.
Nandoh, "Stabilizing control method for suppressing oscillations of
induction motors driven by PWM inverters," IEEE Trans. on Industrial Electronics,
vol. 37, no. 1, pp. 48-56, Feb.1990. Abstract
Link
1. 9. D. Vincenti, P.D.
Ziogas, R.V. Patel, "A PC-based pulse-width modulator for static
converters," IEEE Trans. on Industrial Electronics, vol. 37, no. 1, pp. 57-69,
Feb.1990. Abstract
Link
1. 10. S.K. Tso, K.H. Tang, "Digital control
strategies for sinewave-output
cycloconverters," IEEE Trans. on Industrial Electronics, vol. 37, no.
1, pp. 70-76, Feb.1990. Abstract
Link
1. 11. H.M. El-Bolok, M.E.
Masoud, M.M. Mahmoud, "A microprocessor-based
adaptive power factor corrector for nonlinear loads," IEEE Trans. on Industrial
Electronics, vol. 37, no. 1, pp. 77-81, Feb.1990. Abstract
Link
1. 12. P.T. Ho, S.K. Tso, "Fast extraction of
positive-sequence current from harmonically corrupted three-phase currents for
1. 13. T. Furuhashi, S. Okuma, Y.
Uchikawa, "A study on the theory of instantaneous
reactive power," IEEE Trans. on Industrial Electronics, vol. 37, no. 1, pp.
86-90, Feb.1990. Abstract
Link
1. 14. P.N. Enjeti, P.D.
Ziogas, "Analysis of a static power converter under unbalance: a novel
approach," IEEE Trans. on Industrial Electronics, vol. 37, no. 1, pp. 91-93,
Feb.1990. Abstract
Link
1. 15. Vineeta, K. Kant, "An efficient algorithm
for the control of a microprocessor-based single-phase to three-phase
cycloconverter," IEEE Trans. on Industrial
Electronics, vol. 37, no. 1, pp. 93-95, Feb.1990. Abstract
Link
2. 1. J.A. De Abreu-Garcia, T.T. Hartley, F.
Mossayebi, "On matrix integrators for real-time
simulation," IEEE Trans. on Industrial Electronics, vol. 37, no. 2, pp.
113-118, Apr.1990. Abstract
Link
2. 2. R.M.H. Cheng, S.C.L. Poon, T.
Montor, "Adaptive synchronization control of a
robotic manipulator operating in an intelligent workcell,"
IEEE Trans. on Industrial Electronics, vol. 37, no. 2, pp. 119-126,
Apr.1990. Abstract
Link
2. 3. P.K. Nandam, P.C. Sen,
"A comparative study of a Luenberger observer and
adaptive observer-based variable structure speed control system using a
self-controlled synchronous motor," IEEE Trans. on Industrial Electronics,
vol. 37, no. 2, pp. 127-132, Apr.1990. Abstract
Link
2. 4. A. Lumsdaine, J.H. Lang, "State observers
for variable-reluctance motors," IEEE Trans. on Industrial Electronics, vol.
37, no. 2, pp. 133-142, Apr.1990. Abstract
Link
2. 5. P.N. Enjeti, P.D.
Ziogas, J.F. Lindsay, M.H. Rashid, "A new PWM speed control system for
high-performance AC motor drives ," IEEE Trans. on Industrial Electronics,
vol. 37, no. 2, pp. 143-151, Apr.1990. Abstract
Link
2. 6. H.M. El-Bolok, "A microprocessor-based
firing circuit for thyristors working under a
three-phase variable-frequency supply," IEEE Trans. on Industrial Electronics,
vol. 37, no. 2, pp. 152-155, Apr.1990. Abstract
Link
2. 7. H.M. El-Bolek, S.S.
Abd-El-Hamid, "A microprocessor-based self-adjusting system for integral
cycle power control of
2. 8. M.K. Kazimierczuk, X.T. Bui, "Class-E
amplifier with an inductive impedance inverter," IEEE Trans. on Industrial
Electronics, vol. 37, no. 2, pp. 160-166, Apr.1990. Abstract
Link
2. 9. J.H.R. Enslin, J.D. Van
Wyk, P. Van Rhyn, J.J.
Schoeman, "Low-voltage, high-efficiency switch-mode
high-power inverters for AC link converter applications," IEEE Trans. on
Industrial Electronics, vol. 37, no. 2, pp. 167-172, Apr.1990. Abstract
Link
2. 10. J.J. Jozwik, M.K.
Kazimierczuk, "Analysis and design of class-E2 DC/DC
converter," IEEE Trans. on Industrial Electronics, vol. 37, no. 2, pp.
173-183, Apr.1990. Abstract
Link
2. 11. C.W. De Silva, "Design equations for the tooth distribution of
stepping motors," IEEE Trans. on Industrial Electronics, vol. 37, no. 2, pp.
184-186, Apr.1990. Abstract
Link
3. 1. C.M. Lim, "Experimental evaluation of a self-tuning controller,"
IEEE Trans. on Industrial Electronics, vol. 37, no. 3, pp. 193-194, Jun.1990. Abstract
Link
3. 2. P.A.W. Walker, F.A. Torkey, "On-line
self-tuning control of processes with inaccessible state ," IEEE Trans. on
Industrial Electronics, vol. 37, no. 3, pp. 195-202, Jun.1990. Abstract
Link
3. 3. J.H.R. Enslin, J.D. Van
Wyk, M. Naude,
"Adaptive, closed-loop control of dynamic power filters as fictitious power
compensators," IEEE Trans. on Industrial Electronics, vol. 37, no. 3, pp.
203-211, Jun.1990. Abstract
Link
3. 4. G.O. Beale, "Real-time simulation of dynamic systems on a pyramid
architecture ," IEEE Trans. on Industrial Electronics, vol. 37, no. 3, pp.
212-220, Jun.1990. Abstract
Link
3. 5. G.F. Mauer, "On-line cylinder fault
diagnostics for internal combustion engines ," IEEE Trans. on Industrial
Electronics, vol. 37, no. 3, pp. 221-226, Jun.1990. Abstract
Link
3. 6. E.Y.Y. Ho, P.C. Sen, "A
microcontroller-based induction motor drive system using variable structure
strategy with decoupling," IEEE Trans. on Industrial Electronics, vol. 37, no.
3, pp. 227-235, Jun.1990. Abstract
Link
3. 7. S. Matsuda, H. Ogi, K. Nishimura, Y.
Okataku, S. Tamura, "Power system voltage control by
distributed expert systems," IEEE Trans. on Industrial Electronics, vol. 37,
no. 3, pp. 236-240, Jun.1990. Abstract
Link
3. 8. S.A. Hall, "Pulse-width-modulating control of a nonlinear
electromagnetic actuator," IEEE Trans. on Industrial Electronics, vol. 37, no.
3, pp. 241-249, Jun.1990. Abstract
Link
3. 9. K. Mine, Y. Morimoto, "Methods of alternating noise canceling for an
instrumentation using strain gages," IEEE Trans. on Industrial Electronics,
vol. 37, no. 3, pp. 250-252, Jun.1990. Abstract
Link
3. 10. A. Valenzano, L.
Ciminiera, "Performance evaluation of MiniMAP
networks," IEEE Trans. on Industrial Electronics, vol. 37, no. 3, pp. 253-258,
Jun.1990. Abstract
Link
3. 11. J. Caven, J. Jackman,
"An icon-based approach to system control development," IEEE Trans. on Industrial
Electronics, vol. 37, no. 3, pp. 259-264, Jun.1990. Abstract
Link
4. 1. J.-P. Jiang, S. Chen, P.K.
Sinha, "Optimal feedback control of direct-current
motors," IEEE Trans. on Industrial Electronics, vol. 37, no. 4, pp. 269-274,
Aug.1990. Abstract
Link
4. 2. Tian-Hua Liu, Chang-Huan
Liu, "Implementation of AC servo controllers employing frequency-domain
optimization techniques," IEEE Trans. on Industrial Electronics, vol. 37, no.
4, pp. 275-282, Aug.1990. Abstract
Link
4. 3. T. Murata, T. Tsuchiya, I. Takeda, "Vector control for induction
machine on the application of optimal control theory," IEEE Trans. on Industrial
Electronics, vol. 37, no. 4, pp. 283-290, Aug.1990. Abstract
Link
4. 4. R. Krishnan, G.-H. Rim, "Modeling, simulation, and analysis of
variable-speed constant frequency power conversion scheme with a permanent
magnet brushless DC generator," IEEE Trans. on Industrial Electronics, vol.
37, no. 4, pp. 291-296, Aug.1990. Abstract
Link
4. 5. A.K.S. Bhat, M.M.
Swamny, "Analysis and design of a parallel resonant converter including
the effect of a high-frequency transformer," IEEE Trans. on Industrial
Electronics, vol. 37, no. 4, pp. 297-306, Aug.1990. Abstract
Link
4. 6. M.A. Manzoul, "Multiple
overcurrent relays using a single microprocessor,"
IEEE Trans. on Industrial Electronics, vol. 37, no. 4, pp. 307-309,
Aug.1990. Abstract
Link
4. 7. Vineeta, K. Kant, "Microcomputer-based
single-phase to three-phase cycloconverter,"
IEEE Trans. on Industrial Electronics, vol. 37, no. 4, pp. 310-316, Aug.1990. Abstract
Link
4. 8. M. Emaami, H.C. Wood, H.M.
Skarsgard, "A controller for plasma motion in a
Tokamak based on model estimation," IEEE Trans. on
Industrial Electronics, vol. 37, no. 4, pp. 317-322, Aug.1990. Abstract
Link
4. 9. V. Anunciada, M.M. Silva, "New
constant-frequency current-mode control for power converters, stable for all
values of duty ratio, and usable in all four quadrants ," IEEE Trans. on
Industrial Electronics, vol. 37, no. 4, pp. 323-325, Aug.1990. Abstract
Link
5. 1. T.M. Jahns, "Designing intelligent muscle
into industrial motion control," IEEE Trans. on Industrial Electronics, vol.
37, no. 5, pp. 329-341, Oct.1990. Abstract
Link
5. 2. P.M. Pelczewski, U.H. Kunz, "The optimal
control of a constrained drive system with brushless DC motor," IEEE Trans. on
Industrial Electronics, vol. 37, no. 5, pp. 342-348, Oct.1990. Abstract
Link
5. 3. Bum-Jae You, Young
Seok Oh, Zeungnam Bien,
"A vision system for an automatic assembly machine of electronic components,"
IEEE Trans. on Industrial Electronics, vol. 37, no. 5, pp. 349-357, Oct.1990. Abstract
Link
5. 4. H. Zhang, G. Trott, R.P. Paul, "Minimum
delay PID control of interpolated joint trajectories of robot manipulators,"
IEEE Trans. on Industrial Electronics, vol. 37, no. 5, pp. 358-364, Oct.1990. Abstract
Link
5. 5. S. Tzafestas, N.P.
Papanikolopoulos, "Incremental fuzzy expert PID control," IEEE Trans. on
Industrial Electronics, vol. 37, no. 5, pp. 365-371, Oct.1990. Abstract
Link
5. 6. L.A. Dessaint, B.J. Hebert, H. Le-Huy,
G. Cavuoti, "A DSP-based adaptive controller for a
smooth positioning system," IEEE Trans. on Industrial Electronics, vol. 37,
no. 5, pp. 372-377, Oct.1990. Abstract
Link
5. 7. M. Yamaguchi, T. Saito, M. Izumitani, S.
Sugita, Y. Tsutsumi, "Analysis of control
characteristics using fuel cell plant simulator ," IEEE Trans. on Industrial
Electronics, vol. 37, no. 5, pp. 378-386, Oct.1990. Abstract
Link
5. 8. S. Lorenzo, J.M. Ruiz, F. Aldana, M.
Shaker, "A new modeling and simulation CAD package for power converter design,"
IEEE Trans. on Industrial Electronics, vol. 37, no. 5, pp. 387-397,
Oct.1990. Abstract
Link
5. 9. N.C. Das, A.K.
Mukhopadhyay, "Microprocessor-based on-line monitoring and
characterization of power factor of a synchronous motor," IEEE Trans. on
Industrial Electronics, vol. 37, no. 5, pp. 398-401, Oct.1990. Abstract
Link
5. 10. B.K. Bose, "An adaptive hysteresis-band
current control technique of a voltage-fed PWM inverter for machine drive
system," IEEE Trans. on Industrial Electronics, vol. 37, no. 5, pp. 402-408,
Oct.1990. Abstract
Link
5. 11. L.D. Salazar, P.D. Ziogas, "A
high-frequency forward DC/DC converter topology with transformer flux balancing
capability," IEEE Trans. on Industrial Electronics, vol. 37, no. 5, pp.
409-418, Oct.1990. Abstract
Link
5. 12. R.K.F. Teng, A.A.
Mostafa, A. Karim, "Study of solar cell
fabrication using an electrostatic thick-film printing method," IEEE Trans. on
Industrial Electronics, vol. 37, no. 5, pp. 419-423, Oct.1990. Abstract
Link
5. 13. Hurng-Liahng Jou,
Hui-Yung Chu,
Ching-Lien Huang, Chin-Hsing
Chen, "A shortest data window algorithm for detecting the peak value of
sinusoidal signals," IEEE Trans. on Industrial Electronics, vol. 37, no. 5,
pp. 424-425, Oct.1990. Abstract
Link
6. 1. V. Catania, L.
Milazzo, A. Puliafito, L. Vita, "Enhancing
reliability in an industrial
6. 2. P. Montuschi, A.
Valenzano, L. Ciminiera, "Selection of token
holding times in timed-token protocols," IEEE Trans. on Industrial Electronics,
vol. 37, no. 6, pp. 442-451, Dec.1990. Abstract
Link
6. 3. Fu-Juay Chang,
Hsiang-Ju Liao, Shyand
Chang, "Position control of DC motors via variable structure systems control: a
chattering alleviation approach," IEEE Trans. on Industrial Electronics, vol.
37, no. 6, pp. 452-459, Dec.1990. Abstract
Link
6. 4. N. Hemati, J.S. Thorp, M.C.
Leu, "Robust nonlinear control of brushless DC
motors for direct-drive robotic applications," IEEE Trans. on Industrial
Electronics, vol. 37, no. 6, pp. 460-468, Dec.1990. Abstract
Link
6. 5. R. Krishnan, P.N. Materu, "Design of a
single-switch-per-phase converter for switched reluctance motor drives,"
IEEE Trans. on Industrial Electronics, vol. 37, no. 6, pp. 469-476, Dec.1990. Abstract
Link
6. 6. C.C. Chan, H. Wang, "An effective method for rotor resistance
identification for high-performance induction motor vector control," IEEE Trans.
on Industrial Electronics, vol. 37, no. 6, pp. 477-482, Dec.1990. Abstract
Link
6. 7. I. Avitan, V. Skormin,
"Mathematical modeling and computer simulation of a separately excited DC motor
with independent armature/field control," IEEE Trans. on Industrial Electronics,
vol. 37, no. 6, pp. 483-489, Dec.1990. Abstract
Link
6. 8. S.S. Valtchev, J.B.
Klaassens, "Efficient resonant power conversion," IEEE Trans. on Industrial
Electronics, vol. 37, no. 6, pp. 490-495, Dec.1990. Abstract
Link
6. 9. L.D. Salazar, P.D. Ziogas, "A
high-frequency two-switch forward converter with optimized performance,"
IEEE Trans. on Industrial Electronics, vol. 37, no. 6, pp. 496-505, Dec.1990. Abstract
Link
6. 10. J. Holtz, K.-H. Werner, "Multi-inverter
6. 11. F.J. Gracia, F.
Arizti, F.J. Aranceta, "A
nonideal macromodel of
thyristor for transient analysis in power electronic
systems," IEEE Trans. on Industrial Electronics, vol. 37, no. 6, pp. 514-520,
Dec.1990. Abstract
Link
6. 12. A.R. Prasad, P.D. Ziogas, S. Manias, "A
novel passive waveshaping method for single-phase
diode rectifiers," IEEE Trans. on Industrial Electronics, vol. 37, no. 6, pp.
521-530, Dec.1990. Abstract
Link
6. 13. N. Ammasaigounden, M.
Subbiah, "Microprocessor-based voltage controller
for wind-driven induction generators," IEEE Trans. on Industrial Electronics,
vol. 37, no. 6, pp. 531-537, Dec.1990. Abstract
Link
6. 14. Y.-Q. Shi, K.K. Yen, D. Zhang, "Improved stability robustness of
linear discrete-time systems via a linear fractional transformation," IEEE Trans.
on Industrial Electronics, vol. 37, no. 6, pp. 538-543, Dec.1990. Abstract
Link
6. 15. M.M. Jovanovic, C.-S.
Leu, F.C.Y. Lee, "Zero-voltage-switched
multiresonant converter for high-power, pulse-load
applications," IEEE Trans. on Industrial Electronics, vol. 37, no. 6, pp.
544-555, Dec.1990. Abstract
Link
6. 16. D.C. Hanselman, "Resolver signal
requirements for high accuracy resolver-to-digital
conversion," IEEE Trans. on Industrial Electronics, vol. 37, no. 6, pp.
556-561, Dec.1990. Abstract
Link
6. 17. P.C. Sen, "Electric motor drives and
control-past, present, and future," IEEE Trans. on Industrial Electronics,
vol. 37, no. 6, pp. 562-575, Dec.1990. Abstract
Link
6. 18. Z.O. Yonah, A.M. El-Serafi,
A.E. Krause, "On the use of a digital computer as a two-phase variable-amplitude
variable-frequency oscillator," IEEE Trans. on Industrial Electronics, vol.
37, no. 6, pp. 576-581, Dec.1990. Abstract
Link
6. 19. E.J. Tacconi, R.J.
Mantz, "Linearization and feedforward
compensation for switching systems ," IEEE Trans. on Industrial Electronics,
vol. 37, no. 6, pp. 581-584, Dec.1990. Abstract
Link
6. 20. M. Bramanti, "A high sensitivity
measuring technique for capacitive sensor transducers," IEEE Trans. on Industrial
Electronics, vol. 37, no. 6, pp. 584-586, Dec.1990. Abstract
Link
1. 1. H. Dai, N.K. Sinha, "Robust recursive
instrumental variable method with modified weights for bilinear system
identification," IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp.
1-7, Feb.1991. Abstract
Link
1. 2. M.A. Manzoul, "Interrupt-driven
microprocessor-based overcurrent relay," IEEE Trans.
on Industrial Electronics, vol. 38, no. 1, pp. 8-9, Feb.1991. Abstract
Link
1. 3. F. Chen, C.S. Chen, "A 20 b dynamic-range floating-point data
acquisition system," IEEE Trans. on Industrial Electronics, vol. 38, no. 1,
pp. 10-14, Feb.1991. Abstract
Link
1. 4. H. Arai, S. Tachi, "Position control
system of a two degree of freedom manipulator with a passive joint," IEEE Trans.
on Industrial Electronics, vol. 38, no. 1, pp. 15-20, Feb.1991. Abstract
Link
1. 5. T.C.S. Hsia, T.A.
Lasky, Z. Guo, "Robust independent joint
controller design for industrial robot manipulators," IEEE Trans. on Industrial
Electronics, vol. 38, no. 1, pp. 21-25, Feb.1991. Abstract
Link
1. 6. Dong Sang Yoo, Myung
Jin Chung, Zeungnam Bien,
"Real-time implementation and evaluation of dynamic control algorithms for
industrial manipulators," IEEE Trans. on Industrial Electronics, vol. 38, no.
1, pp. 26-31, Feb.1991. Abstract
Link
1. 7. Marn Go Kim, Myung
Joong Youn, "A discrete
time domain modeling and analysis of controlled series resonant converter,"
IEEE Trans. on Industrial Electronics, vol. 38, no. 1, pp. 32-40, Feb.1991. Abstract
Link
1. 8. M.P. Kazmierkowski, W.
Sulkowski, "A novel vector control scheme for
transistor PWM inverter-fed induction motor drive," IEEE Trans. on Industrial
Electronics, vol. 38, no. 1, pp. 41-47, Feb.1991. Abstract
Link
1. 9. C. Frangos, Y. Yavin,
"Current controller design for an electromagnetic actuator using an online
parameter optimization approach," IEEE Trans. on Industrial Electronics, vol.
38, no. 1, pp. 48-50, Feb.1991. Abstract
Link
1. 10. S. Saadate, R. Le
Doeuff, R. Periot, "Design of a high-voltage
GTO chopper for traction drive," IEEE Trans. on Industrial Electronics, vol.
38, no. 1, pp. 51-56, Feb.1991. Abstract
Link
1. 11. M. Morimoto, S. Sato, K. Sumito, K.
Oshitani, "Voltage modulation factor of the magnetic
flux control PWM method for inverter," IEEE Trans. on Industrial Electronics,
vol. 38, no. 1, pp. 57-61, Feb.1991. Abstract
Link
1. 12. W. Ahmad, "Biphase amplifier for precision controlled rectification
and polar logic operations," IEEE Trans. on Industrial Electronics, vol. 38,
no. 1, pp. 62-64, Feb.1991. Abstract
Link
1. 13. F.H.F. Leung, P.K.S. Tam, C.K. Li, "The control of switching DC-DC
converters-a general LWR problem," IEEE Trans. on Industrial Electronics, vol.
38, no. 1, pp. 65-71, Feb.1991. Abstract
Link
1. 14. M. Kazerani, P.D.
Ziogas, G. Joos, "A novel active current
waveshaping technique for solid-state input power
factor conditioners," IEEE Trans. on Industrial Electronics, vol. 38, no. 1,
pp. 72-78, Feb.1991. Abstract
Link
1. 15. R. Simard, A.
Cheriti, T.A. Meynard, K. Al-Haddad, V.
Rajagopalan, "An EPROM-based PWM modulator for a
three-phase soft commutated inverter," IEEE Trans. on Industrial Electronics,
vol. 38, no. 1, pp. 79-81, Feb.1991. Abstract
Link
1. 16. R.E. Zulinski, K.J. Herman, J.C.
Mandojana, "The infeasibility of constant output
power in a constant-current-fed class-E power inverter," IEEE Trans. on Industrial
Electronics, vol. 38, no. 1, pp. 81-82, Feb.1991. Abstract
Link
2. 1. Y.-S. Lee, D.K.W. Cheng, Y.C. Cheng, "Design of a novel AC regulator,"
IEEE Trans. on Industrial Electronics, vol. 38, no. 2, pp. 89-94, Apr.1991. Abstract
Link
2. 2. S.K. Panda, G. Amaratunga, "Comparison of two techniques for
closed-loop drive of VR step motors without direct rotor position sensing,"
IEEE Trans. on Industrial Electronics, vol. 38, no. 2, pp. 95-101, Apr.1991. Abstract
Link
2. 3. K.-W. Lim, T.-S. Low, M.F. Rahman, L.-B. Wee, "A discrete time
variable structure controller for a brushless DC motor drive," IEEE Trans. on
Industrial Electronics, vol. 38, no. 2, pp. 102-107, Apr.1991. Abstract
Link
2. 4. Seung-Gi Jeong, Min-Ho Park, "The analysis and compensation of
dead-time effects in PWM inverters ," IEEE Trans. on Industrial Electronics,
vol. 38, no. 2, pp. 108-114, Apr.1991. Abstract
Link
2. 5. T. Shimizu, M. Shioya, "Characteristics of electric power transmission
on high-frequency inverter having distributed constant line at load side,"
IEEE Trans. on Industrial Electronics, vol. 38, no. 2, pp. 115-120, Apr.1991. Abstract
Link
2. 6. S.K. Biswas, B. Basak, M.M. Swamy, "A three-phase half-controlled
rectifier with pulse width modulation ," IEEE Trans. on Industrial Electronics,
vol. 38, no. 2, pp. 121-125, Apr.1991. Abstract
Link
2. 7. R.J. King, "Analysis and design of an unusual unity-power-factor
rectifier," IEEE Trans. on Industrial Electronics, vol. 38, no. 2, pp.
126-134, Apr.1991. Abstract
Link
2. 8. D. van der Linde, C.A.M. Boon, J.B. Klaassens, "Design of a
high-frequency planar power transformer in multilayer technology," IEEE Trans. on
Industrial Electronics, vol. 38, no. 2, pp. 135-141, Apr.1991. Abstract
Link
2. 9. W.E. Snyder, M.-L. Hsiao, K.J. Overton, K.E. Boone, "Circuit board
inspection using a range camera," IEEE Trans. on Industrial Electronics, vol.
38, no. 2, pp. 142-149, Apr.1991. Abstract
Link
2. 10. M. Numao, S.-i. Morishita, "Cooperative scheduling and its
application to steelmaking processes ," IEEE Trans. on Industrial Electronics,
vol. 38, no. 2, pp. 150-155, Apr.1991. Abstract
Link
3. 1. D. Antic, J. Holtz, "High-efficiency dual transistor base drive
circuit based on the Cuk converter topology,"
IEEE Trans. on Industrial Electronics, vol. 38, no. 3, pp. 161-165, Jun.1991. Abstract
Link
3. 2. A. Ishiguro, T. Furuhashi, S. Okuma, "A
novel control method for forced commutated cycloconverters
using instantaneous values of input line-to-line voltages," IEEE Trans. on
Industrial Electronics, vol. 38, no. 3, pp. 166-172, Jun.1991. Abstract
Link
3. 3. M.G. Kim, D.S. Lee, M.J. Youn, "A new
state feedback control of resonant converters," IEEE Trans. on Industrial
Electronics, vol. 38, no. 3, pp. 173-179, Jun.1991. Abstract
Link
3. 4. S. Iida, Y. Okuma, S. Masukawa, S.
Miyairi, B.K. Bose, "Study on magnetic noise caused
by harmonics in output voltages of PWM inverter," IEEE Trans. on Industrial
Electronics, vol. 38, no. 3, pp. 180-186, Jun.1991. Abstract
Link
3. 5. Y. Shoji, M. Inaba, T. Fukuda, "Impact
control of grasping [robot manipulators]," IEEE Trans. on Industrial Electronics,
vol. 38, no. 3, pp. 187-194, Jun.1991. Abstract
Link
3. 6. T. Ozaki, T. Suzuki, T. Furuhashi, S.
Okuma, Y. Uchikawa, "Trajectory control of robotic
manipulators using neural networks ," IEEE Trans. on Industrial Electronics,
vol. 38, no. 3, pp. 195-202, Jun.1991. Abstract
Link
3. 7. E.J. Dede, J.V. Gonzalez, J.A.
Linares, J. Jordan, D. Ramirez, P.
Rueda, "25-kW/50-kHz generator for induction
heating," IEEE Trans. on Industrial Electronics, vol. 38, no. 3, pp. 203-209,
Jun.1991. Abstract
Link
3. 8. G. Corriga, S. Sanna,
G. Usai, "An optimal tandem active-passive
suspension system for road vehicles with minimum power consumption," IEEE Trans.
on Industrial Electronics, vol. 38, no. 3, pp. 210-216, Jun.1991. Abstract
Link
3. 9. M. Sunwoo, K.C. Cheok,
N.J. Huang, "Model reference adaptive control for vehicle active suspension
systems," IEEE Trans. on Industrial Electronics, vol. 38, no. 3, pp. 217-222,
Jun.1991. Abstract
Link
3. 10. C. Umeagukwu, J. McCormick,
"Investigation of an array technique for robotic seam tracking of weld joints,"
IEEE Trans. on Industrial Electronics, vol. 38, no. 3, pp. 223-229,
Jun.1991. Abstract
Link
4. 1. T.-H. Lee, K.-W. Lim, W.-C. Lai, "Real-time multivariable self-tuning
controller using a feedforward paradigm with
application to a coupled electric-drive pilot plant," IEEE Trans. on Industrial
Electronics, vol. 38, no. 4, pp. 237-242, Aug.1991. Abstract
Link
4. 2. S.T. Hung, "Sensitivity points-based self-tuning," IEEE Trans. on
Industrial Electronics, vol. 38, no. 4, pp. 243-250, Aug.1991. Abstract
Link
4. 3. A.K.S. Bhat, "A unified approach for the
steady-state analysis of resonant converters," IEEE Trans. on Industrial
Electronics, vol. 38, no. 4, pp. 251-259, Aug.1991. Abstract
Link
4. 4. J.G. Cho, G.H. Cho,
"Single-cycle resonant converters: a new group of quasi-resonant converters
suitable for high-performance DC/DC and AC/AC conversion applications,"
IEEE Trans. on Industrial Electronics, vol. 38, no. 4, pp. 260-267, Aug.1991. Abstract
Link
4. 5. B.T. Ooi, B.M.M.
Mwinyiwiwa, X. Wang, G. Joos, "Operating
limits of the current-regulated delta-modulated current-source PWM rectifier,"
IEEE Trans. on Industrial Electronics, vol. 38, no. 4, pp. 268-274,
Aug.1991. Abstract
Link
4. 6. Chang-Ming Liaw, Ying-Shieh
Kung, Ching-Ming Wu, "Design and implementation of a
high-performance field-oriented induction motor drive," IEEE Trans. on Industrial
Electronics, vol. 38, no. 4, pp. 275-282, Aug.1991. Abstract
Link
4. 7. H. Singh, S.M. Sharma, "Some novel μP-based
configurations for controlling remotely located stepper motors as actuators of
control valves," IEEE Trans. on Industrial Electronics, vol. 38, no. 4, pp.
283-287, Aug.1991. Abstract
Link
4. 8. A. Di Stefano, O. Mirabella, "Evaluating
the field bus data link layer by a Petri net-based simulation," IEEE Trans. on
Industrial Electronics, vol. 38, no. 4, pp. 288-297, Aug.1991. Abstract
Link
4. 9. H.-G. Yeh, "Processing performance of two
Kalman filter algorithms with a DSP32C by using
assembly and C languages," IEEE Trans. on Industrial Electronics, vol. 38, no.
4, pp. 298-302, Aug.1991. Abstract
Link
4. 10. Dong Seong Oh, Hwi
Beom Shin, Myung
Joong Youn, "A new slip
gain adaptation algorithm for indirect field-oriented drive systems," IEEE Trans.
on Industrial Electronics, vol. 38, no. 4, pp. 303-307, Aug.1991. Abstract
Link
5. 1. L. Zhou, G. Cook, "Path planning for robotic manipulators with
redundant degrees of freedom," IEEE Trans. on Industrial Electronics, vol. 38,
no. 5, pp. 413-420, Oct.1991. Abstract
Link
5. 2. J.Y. Hung, "Control of industrial robots that have transmission
elasticity," IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp.
421-427, Oct.1991. Abstract
Link
5. 3. C.C. Hang, K.K. Sin, "On-line auto tuning of PID controllers based on
the cross-correlation technique," IEEE Trans. on Industrial Electronics, vol.
38, no. 5, pp. 428-437, Oct.1991. Abstract
Link
5. 4. A.C. Lippincott, R.M.
Nelms, "A capacitor-charging power supply using a series-resonant
topology, constant on-time/variable frequency control, and zero-current
switching ," IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp.
438-447, Oct.1991. Abstract
Link
5. 5. M.-y. Chow, P.M. Mangum, S.O. Yee, "A neural network approach to
real-time condition monitoring of induction motors," IEEE Trans. on Industrial
Electronics, vol. 38, no. 5, pp. 448-453, Oct.1991. Abstract
Link
5. 6. K.-T. Chau, Y.-S. Lee, A.
Ioinovici, "Computer-aided modeling of
quasi-resonant converters in the presence of parasitic losses by using the
MISSCO concept," IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp.
454-461, Oct.1991. Abstract
Link
5. 7. C.Q. Lee, S. Sooksatra, "Performance
characteristics of the full-bridge zero voltage switching PWM resonant
converter," IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp.
462-468, Oct.1991. Abstract
Link
5. 8. J.G. Kettleborough, I.R. Smith, V.V.
Vadher, F.L.M. Antunes,
"Microprocessor-based DC motor drive with spillover field weakening ," IEEE Trans.
on Industrial Electronics, vol. 38, no. 5, pp. 469-475, Oct.1991. Abstract
Link
5. 9. M. Prokin, "Speed measurement using the
improved DMA transfer method," IEEE Trans. on Industrial Electronics, vol. 38,
no. 5, pp. 476-483, Oct.1991. Abstract
Link
5. 10. S. Seereeram, J.T.-Y.
Wen, "An all-geodesic algorithm for filament winding
of a T-shaped form ," IEEE Trans. on Industrial Electronics, vol. 38, no. 5,
pp. 484-490, Oct.1991. Abstract
Link
5. 11. Zhe Chen, "Local
observability and its application to multiple measurement estimation,"
IEEE Trans. on Industrial Electronics, vol. 38, no. 5, pp. 491-496, Oct.1991. Abstract
Link
5. 12. V.V. Bapeswara Rao,
P. Enjetti, P.D. Ziogas,
"Comment, with reply, on `Analysis of a static power converter under unbalance:
a novel approach' by P. N. Enjeti and P.D.
Ziogas," IEEE Trans. on Industrial Electronics,
vol. 38, no. 5, pp. 497-498, Oct.1991. Abstract
Link
5. 13. P.D. Olivier, "Feedback linearization of DC motors," IEEE Trans. on
Industrial Electronics, vol. 38, no. 5, pp. 498-501, Oct.1991. Abstract
Link
5. 14. D.C. Hanselman, "Techniques for improving
resolver-to-digital conversion accuracy ," IEEE Trans.
on Industrial Electronics, vol. 38, no. 5, pp. 501-504, Oct.1991. Abstract
Link
6. 1. L. Zhou, G. Cook, "Path planning for robotic manipulators with
redundant degrees of freedom," IEEE Trans. on Industrial Electronics, vol. 38,
no. 6, pp. 413-420, Dec.1991. Abstract
Link
6. 2. J.Y. Hung, "Control of industrial robots that have transmission
elasticity," IEEE Trans. on Industrial Electronics, vol. 38, no. 6, pp.
421-427, Dec.1991. Abstract
Link
6. 3. C.C. Hang, K.K. Sin, "On-line auto tuning of PID controllers based on
the cross-correlation technique," IEEE Trans. on Industrial Electronics, vol.
38, no. 6, pp. 428-437, Dec.1991. Abstract
Link
6. 4. A.C. Lippincott, R.M.
Nelms, "A capacitor-charging power supply using a series-resonant
topology, constant on-time/variable frequency control, and zero-current
switching ," IEEE Trans. on Industrial Electronics, vol. 38, no. 6, pp.
438-447, Dec.1991. Abstract
Link
6. 5. M.-y. Chow, P.M. Mangum, S.O. Yee, "A neural network approach to
real-time condition monitoring of induction motors," IEEE Trans. on Industrial
Electronics, vol. 38, no. 6, pp. 448-453, Dec.1991. Abstract
Link